FLEX I/O EtherNet/IP Adapter Module User Manual, 1794-UM006A ...

More documents

Recommendations

Info

Important <strong>User</strong> Information Because of the variety of uses for the products described in this publication, those responsible for the application and use of this control equipment must satisfy themselves that all necessary steps have been taken to assure that each application and use meets all performance and safety requirements, including any applicable laws, regulations, codes and standards. The illustrations, charts, sample programs and layout examples shown in this guide are intended solely for purposes of example. Since there are many variables and requirements associated with any particular installation, Allen-Bradley does not assume responsibility or liability (to include intellectual property liability) for actual use based upon the examples shown in this publication. Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of Solid-State Control (available from your local Allen-Bradley office), describes some important differences between solid-state equipment and electromechanical devices that should be taken into consideration when applying products such as those described in this publication. Reproduction of the contents of this copyrighted publication, in whole or part, without written permission of Rockwell Automation, is prohibited.
Throughout this manual we use these notes to make you aware of safety considerations: WARNING ! ATTENTION ! Warning and Attention statements help you to: • identify a hazard • avoid a hazard • recognize the consequences IMPORTANT Allen-Bradley, ControlLogix, and <strong>FLEX</strong> I/O are trademarks of Rockwell Automation. Ethernet is a trademark of Digital Equipment Corporation, Intel, and Xerox Corporation. RSLinx and RSLogix 5000 are trademarks of Rockwell Software. Windows NT is a trademark of Microsoft Corporation. Identifies information about practices or circumstances that have the potential to create an explosion hazard. Identifies information about practices or circumstances that can lead to personal injury or death, property damage or economic loss. Identifies information that is critical for successful application and understanding of the product.
Page 1: FLEX I/O EtherNet/IP Adapter Module
Page 5: Rockwell Automation Support Rockwel
Page 8 and 9: P-2 About This User Manual How To U
Page 10 and 11: P-4 About This User Manual Where to
Page 12 and 13: P-6 About This User Manual Publicat
Page 14 and 15: P-8 About This User Manual Publicat
Page 16 and 17: Table of Contents ii Using Analog I
Page 18 and 19: 1-2 About the 1794-AENT Adapter Har
Page 20 and 21: 1-4 About the 1794-AENT Adapter Sup
Page 22 and 23: 1-6 About the 1794-AENT Adapter Pub
Page 24 and 25: 2-2 Installing the 1794-AENT Adapte
Page 30 and 31: 3-2 Configuring the 1794-AENT Adapt
Page 38 and 39: 3-10 Configuring the 1794-AENT Adap
Page 44 and 45: 4-2 Using Rack Optimized Discrete I
Page 52 and 53:
4-10 Using Rack Optimized Discrete
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
5-2 Using Analog I/O with Direct Co
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
5-10 Using Analog I/O with Direct C
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
A-2 LED Status Indicators Publicati
Page 76 and 77:
B-2 1794-AENT Adapter Web Pages Pub
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
C-2 Configuring the RSLinx Ethernet
Page 84 and 85:
C-4 Configuring the RSLinx Ethernet
Page 86 and 87:
2 Index N network status indicator
Page 88:
Other Comments PLEASE FOLD HERE BUS
show all

FLEX I/O EtherNet/IP Adapter Module User Manual, 1794-UM006A ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?