FLEX I/O EtherNet/IP Adapter Module User Manual, 1794-UM006A ...

Using Analog I/O with Direct Connection 5-7
The I/O Configuration in the Project Window should now look
similar to the one shown below.
Add the Analog Output Module to the I/O Configuration
1. Right click on the 1794-AENT adapter under the I/O Configuration
folder and select New Module from the pop-up window. The
Select Module Type window will open.
2. Select the 1794-OF41/A analog output module from the list and
click on OK.
Publication 1794-UM006A-EN-P - July 2001