2006 Ford Racing Performance Parts Catalog - Chromwerk
2006 Ford Racing Performance Parts Catalog - Chromwerk
2006 Ford Racing Performance Parts Catalog - Chromwerk
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SERPENTINE BELT HORSEPOWER PULLEY KITS – MUSTANG 5.0L<br />
M-8509-A50 1987-93 5.0L Mustang with serpentine drive belt, A/C and power steering<br />
(E.O. #D-308)<br />
M-8509-A51* 1994-95 Mustang with serpentine belt drive, A/C and power steering.<br />
M-8509-A50* Truck 5.0L/302–1987-96 and 5.8L/351–1988-96<br />
Contains steel crankshaft, water pump and alternator pulleys, plus bolts and installation instructions.<br />
Reduces accessory drive RPM by: (water pump–14%) and (alternator –22%)…and significantly<br />
improves performance! Pulleys are manufactured on state-of-the-art CNC machines and have an<br />
awesome blue finish over zinc plating. Pulleys use production serpentine belt.<br />
WARNING: Engine cooling will be reduced.<br />
1965-69 MUSTANG<br />
BILLET SINGLE<br />
GROOVE PULLEY SET<br />
M-8509-CM*<br />
• Fits 1965-69 Mustang with 289/302/351W<br />
• 3-bolt crank pulley<br />
• Single groove crank pulley<br />
• Single groove water pump pulley<br />
1970-78 MUSTANG<br />
BILLET SINGLE<br />
GROOVE PULLEY SET<br />
M-8509-DM*<br />
• Fits 1970-78 Mustang with 302/351W/351C<br />
• 4-bolt crank pulley<br />
• Single groove crank pulley<br />
• Single groove water pump pulley<br />
CRANKSHAFT PULLEY SPACERS<br />
Use these crankshaft pulley spacers with <strong>Ford</strong> <strong>Racing</strong> M-6316-C351 crank damper to achieve proper belt alignment<br />
on past model 5.0L and 5.8L Windsor engines.<br />
PART NUMBER ENGINE YEAR CRANK PULLEY BOLT PATTERN SPACER THICKNESS<br />
M-8510-A351 351W 1979 and earlier 4 0.350"<br />
M-8510-B351 302 1980 and later 4 0.950"<br />
351W 4 0.950"<br />
M-8510-C351 302 ➀ 1980 and later 4 0.875"<br />
351W ➀ All 4 0.875"<br />
351 <strong>Ford</strong> <strong>Racing</strong> ➀ 4 0.875"<br />
NOTE:<br />
➀ With 0.917"<br />
<strong>Ford</strong> <strong>Racing</strong><br />
crank sprocket.<br />
CRANKSHAFT SPACER<br />
PART NUMBER APPLICATION DESCRIPTION<br />
M-19009-A341* 351C Required with 351 <strong>Ford</strong> <strong>Racing</strong> crankshaft, when used in production 351C engine.<br />
*Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.<br />
Serpentine Belt Horsepower<br />
Pulley Kit M-8509-A50 shown<br />
1970-78 MUSTANG<br />
BILLET DUAL<br />
GROOVE PULLEY SET<br />
M-8509-EM*<br />
• Fits 1970-78 Mustang with<br />
289/302/351W/351C<br />
• 4-bolt crank pulley<br />
INSTALLATION NOTES<br />
1979 and earlier 351W with 0.917" <strong>Ford</strong> <strong>Racing</strong> crank sprocket can use spacer M-8510-A351 if 0.070" is machined from the rear<br />
of the damper hub. Early 3-bolt crank pulleys generally bolt directly to the damper (damper is drilled for 3- and 4-bolt patterns).<br />
However, sheave alignment should be checked and the pulley shimmed as necessary to correct any misalignment.<br />
CRANKSHAFT DAMPER SPACER<br />
M-6359-C460*<br />
Crankshaft damper spacer for M-6303-B600<br />
crankshaft with M-6316-A460 crankshaft<br />
damper. Spacer is 6061-T6 aluminum hard<br />
anodized black. 1.375" long.<br />
Crankshaft Pulley Spacer<br />
M-8510-A351<br />
460/514 CRANKSHAFT DAMPER SPACER<br />
M-6359-D460<br />
• Spacer with counterweight for 1979-97 external balanced<br />
460 engines<br />
• Used on <strong>Ford</strong> <strong>Racing</strong> crate engines<br />
• Same as discontinued production service part D9TZ-6359-A<br />
Crankshaft Spacer<br />
M-19009-A341<br />
www.fordracingparts.com 81<br />
ENGINE<br />
COMPONENTS