3-18 Operating Manual
3-18 Operating Manual
3-18 Operating Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.1 Unpacking of the Centrifuge<br />
Open cardboard. Take out the box containing accessories. Remove upper foam<br />
cushions. Lift centrifuge upwards with a lifting device or with several persons.<br />
When lifting or carrying the centrifuge please always reach under the instrument<br />
from the side.<br />
Proceeding when using a slip box:<br />
Remove cover of cardboard box and take out accessories. Remove upper foam<br />
cushions and remove slip box. Lift centrifuge upwards with a lifting device or with<br />
several persons. When lifting or carrying the centrifuge please always reach<br />
under the instrument from the side.<br />
Attention: The instrument is heavy!<br />
Please keep case for possible transport of centrifuge later.<br />
3.1.1 Transport Safety Device (made of foamed material)<br />
The SIGMA 3-<strong>18</strong> has a transport safety device between the rotor chamber and<br />
the motor.<br />
It is accessible after opening of the centrifuge lid (refer to chapter 3.3 up to 3.4.2<br />
or 9.5.4“ Emergency lid release“).<br />
The transport safety device has to be removed, the motor is slightly lifted at the<br />
shaft.<br />
Align centrifuge and continue start-up.<br />
The transport safety device should be kept for possible transport of the centrifuge<br />
(service, repair).<br />
<strong>Operating</strong> <strong>Manual</strong> SIGMA 3-<strong>18</strong>, page 37 of 95<br />
03/06
Change language