3-18 Operating Manual
3-18 Operating Manual
3-18 Operating Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
General Information<br />
1.1 Technical data<br />
1.2 Suitable accessories<br />
1.3 Scope of supply<br />
1.4 Standards and regulations<br />
1.5 Safety instructions<br />
1.6 Symbol table<br />
Description of the Centrifuge<br />
2.1 General outlay<br />
2.2 Construction and constructive safety measures<br />
2.3 Drive<br />
2.4 Operation and display<br />
2.5 Electronic control<br />
2.6 Safety devices<br />
2.6.1 Lid lock, cover closing device<br />
2.6.2 Imbalance monitoring system<br />
2.6.3 Rotor monitoring<br />
2.6.4 Standstill monitoring<br />
2.6.5 System check<br />
2.6.6 Ground wire check<br />
Installation and Start-up<br />
3.1 Unpacking of the centrifuge<br />
3.1.1 Transport safety device<br />
3.2 Installation<br />
3.2.1 Site<br />
3.2.2 Connection/Fuse<br />
3.2.3 Fuses / emergency circuit breaker on site<br />
3.3 Installation of rotors and accessories<br />
3.3.1 Fastening of angle rotors with hermetically sealed lid<br />
3.4 Initial start-up<br />
3.4.1 Switching on of the centrifuge<br />
3.4.2 Opening lid<br />
3.4.3 Installation of a rotor<br />
<strong>Operating</strong> <strong>Manual</strong> SIGMA 3-<strong>18</strong>, page 7 of 95<br />
03/06
Change language