S 850-0 EN Operating Instructions Siedle Scope
S 850-0 EN Operating Instructions Siedle Scope
S 850-0 EN Operating Instructions Siedle Scope
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Main menu<br />
Settings<br />
Notifications<br />
In the Signal tones menu, acoustic<br />
signal tones can be switched on and<br />
off for different statuses.<br />
Key tones<br />
Each time a button is pressed, an<br />
acoustic signal sounds. These key<br />
tones can be switched on or off<br />
here.<br />
Battery tone<br />
The <strong>Scope</strong> cordless handset signals<br />
a critically low battery status with<br />
an acoustic warning. The battery in<br />
the cordless handset then requires<br />
charging in the charging cradle. This<br />
battery tone can be switched on<br />
or off here.<br />
Signal tone<br />
Executed functions such as<br />
Doormatic activation are signalled<br />
by an acoustic tone. A signal tone<br />
indicates that an action cannot be<br />
performed, e.g. implausible inputs<br />
for date or time. This signal tone<br />
can be switched on or off here.<br />
Audio settings<br />
Ringtones<br />
Phone volume<br />
Notifications<br />
OK Back<br />
Notifications<br />
Key tones<br />
On Off<br />
Battery tone<br />
On Off<br />
Signal tone<br />
On Off<br />
Save Back<br />
Procedure:<br />
• In the Audio settings menu, select<br />
the submenu Signal tones using<br />
the lower control button.<br />
• Confirm by pressing the left-hand<br />
display button OK.<br />
• Select the menu item Key tones<br />
using the lower control button.<br />
• Using the right and left control<br />
buttons, select ON or OFF.<br />
Your selection is highlighted in<br />
yellow.<br />
• Confirm by pressing the left-hand<br />
display button OK.<br />
• Select Battery tone using the<br />
control button.<br />
• Using the right and left control<br />
buttons, select ON or OFF.<br />
• Your selection is highlighted in<br />
yellow.<br />
• Confirm by pressing the left-hand<br />
display button OK.<br />
• Select Signal tone using the control<br />
button.<br />
• Using the right and left control<br />
buttons, select ON or OFF.<br />
• Your selection is highlighted by a<br />
yellow frame.<br />
• Confirm by pressing the left-hand<br />
display button OK.<br />
27