S 850-0 EN Operating Instructions Siedle Scope

Intercom menu
Using the Intercom menu, it is possible
to execute functions in the
building communication mode.
Examples include:
Switching on the light
Dialling last door
Calling an in-house telephone
Calling another Siedle Scope
cordless handset
Viewing the video image at the
door station
A maximum of 15 different functions
plus a maximum of five additional
Scope cordless handsets are
possible. The latter are automatically
entered by the system.
Your electrical installer programs
these functions. Please refer to the
separate In-Home Video system
manual for the intercom functions.
The individual symbols in the
Intercom menu
40
Procedure:
When your cordless handset is in the
ready status, select the Intercom
menu directly using the left-hand
control button.
The display in the status bar shows
the Intercom settings for the different
areas.
• Use the right or left control buttons
to switch between the different
areas.
• The relevant Intercom symbol precedes
each entry in the list.
• If your list contains a large number
of entries, use the lower control
button to scroll to the next page.
All intercom functions
Selectable doors
Bus telephones: Calls to wired
In-Home users
Scope cordless handsets
Switching and control functions
in the In-Home bus