2013 Infiniti | Navigation System Owner's Manual - Infiniti Owner ...

2. Getting started
2-8
displayed.
“Map menu screen” (page 2-18)
Push and hold while a map or status
screen is shown to display the Start
Menu.
“Start menu” (page 2-13)
If this button is tilted up while the
audio function is activated and the
map or status screen is displayed, the
audio system can be operated.
*2 :
Use to adjust the volume. These
buttons have the same function as
that of the volume control knob. Refer
to the vehicle Owner’s Manual.
*3 :
Push this button during a setting
operation to return to the previous
screen. In a settings screen, this
button can also be used to apply the
setting.
*4 :
Push to start the voice recognition
system. If the voice recognition system
is already activated, pushing this
button cancels the voice guidance
and a voice command can be spoken
immediately.
*5 :
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
*6 < >:
Push to display the phone mode
screen.
Refer to the vehicle Owner’s Manual.
*7 < >:
Push to change what is shown on the
vehicle information display.
Refer to the vehicle Owner’s Manual.
STARTING SYSTEM
The navigation system starts when the
ignition switch is turned to the ACC or ON
position.
NOTE:
Do not keep the navigation system on with the
engine or the hybrid system stopped. Doing so
may discharge the vehicle battery (12V battery).
When you use the navigation system,
always keep the engine or the hybrid system
running.