2013 Infiniti | Navigation System Owner's Manual - Infiniti Owner ...

9. Voice recognition
9-2
INFINITI VOICE RECOGNITION
INFINITI Voice Recognition allows handsfree
operation of the navigation system
and other systems equipped on this
vehicle, in one of two modes, Standard
Mode or Alternate Command Mode. Standard
Mode allows the operation of Navigation,
Phone, Audio, Information and Help.
The commands that are available are
always shown on the display and announced
by the system. To perform operations,
simply follow the prompts given by
the system. In Standard Mode, hands-free
operation of Change map view, Route
selection and Bluetooth Audio, etc. is not
available through Voice Recognition.
Alternate Command Mode allows advanced
operations. When this mode is active, an
expanded list of commands can be spoken
after pushing , and the voice
command menu prompts are turned off.
Note that in this mode the recognition
success rate may be affected because the
number of available commands and ways
of speaking each command are increased.
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and
Standard Mode be used for the best
recognition performance.
“Alternate command mode”
(page 9-9)
INFO:
. For U.S. customers, Standard Mode is
selected by default. For Canadian customers,
Alternate Command Mode is the
default mode.
. To improve recognition success when Alternate
Command Mode is active, try using the
Speaker Adaptation function available in
that mode.
“Speaker adaptation” (page 9-15)
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Standard
Mode be used for the best recognition
performance.
. For the voice commands for the audio,
phone and other systems, refer to the
vehicle Owner’s Manual. The following sections
refer only to the navigation, phone and
information systems.
. The voice recognition system cannot be
operated when the retractable hard top is
not closed (for G37 Convertible only).
STANDARD MODE
CONFIRMING HOW TO USE VOICE
COMMANDS
When operating the voice recognition
system for the first time or if help is
preferred to use the system, the User
Guide can be displayed.
It is possible to confirm how to use voice
commands by accessing a simplified User
Guide, which contains basic instructions
and tutorials for several voice commands.
Basic operation
1. Push .
IVR0072
2. Highlight [Others] and push .
3. Highlight [Voice Recognition] and push
.