2013 Infiniti | Navigation System Owner's Manual - Infiniti Owner ...

IDE0148
4. The previous start point is set as a
destination, and the entire route is
shown on the map. Highlight [Start]
after confirming the location of the
displayed destination, and push
. The system sets the destination
to the selected location and starts
calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
Voice command
1. Push located on the steering
wheel.
2. After the tone sounds, speak a command.
To set a previous start point as the
destination:
“Previous Start Point” (Alternate Command
Mode)
SETTING FROM STORED ROUTES
It is possible to select a preferred route
from the stored routes.
1. Push .
JND0247X
2. Highlight [Next Page] and push
.
4. Setting destination
IDE0150
3. Highlight [Stored Routes] and push
. A list screen is displayed.
IDE0151
4. Highlight the preferred route from the
list and push . The route to the
destination is set.
4-17