2013 Infiniti | Navigation System Owner's Manual - Infiniti Owner ...

9. Voice recognition
9-18
. [Continuous Learning]:
Have the system learn the voice
commands of the user in succession,
without selecting commands one by
one.
VOICE COMMAND EXAMPLES
To use the voice recognition function,
speaking one command is sometimes
sufficient, but at other times it is necessary
to speak two or more commands. As
examples, some additional basic operations
by voice commands are described
here.
Example 1: Switching map to 2D
(Plan View) mode
IVR0124
1. Push located on the steering
wheel.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on
the screen changes from [ ] to [ ],
speak “Plan View Map”.
IVR0125
4. Voice feedback will be provided when
the command is accepted, and the map
is displayed in 2D (Plan View).
Example 2: Setting destination
using places list
IVR0126
1. Push located on the steering
wheel.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon on
the screen changes from [ ] to [ ],
speak “Places”.
IVR0127
4. If a route is already set, choose “Near
Current Location”, “Along Route” or
“Near Destination”.
5. After the tone sounds and the icon on
the screen changes again, speak
“Along Route”.
IVR0128