Lotus Domino Administrator 7 Help - Lotus documentation

More documents

Recommendations

Info

Description: Sets the limit for the number of concurrently scheduled transactions on a server. Do not change this variable unless advised to do so by technical support. Applies to: Servers Default: 20. UI equivalent: None Server_MaxSessions Syntax: Server_MaxSessions=number of sessions Description: Specifies the maximum number of sessions that can run concurrently on the server. To prevent server overload, decrease this number if you set up multiple Replicators or Routers. Applies to: Servers Default: None UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. Server_MaxUsers Syntax: Server_MaxUsers=number Description: Sets the maximum number of users that are allowed to access a server. When this number is reached, the server state becomes MAXUSERS, and the server stops accepting new Database Open requests. Use the following values to set this variable: 0 - Unlimited access to server by users number - Restricts number of active users to the number you specify Applies to: Servers Default: None UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. ServerName Syntax: ServerName=name Description: Specifies the full hierarchical name of the server Applies to: Servers Default: None UI equivalent: The Server Name field in the Server document. 1662 Lotus Domino Administrator 7 Help
ServerNoReplRequests Syntax: ServerNoReplRequests=value Description: Forces the server to refuse all replication requests from other servers. When this feature is enabled, to replicate with this server, the requesting server must perform pull-push replication: 0 - Accepts replication requests from other servers 1 - Refuses replication requests from other servers Applies to: Servers Default: None, although omitting this setting allows the server to accept replication requests. UI equivalent: None ServerPullReplication Syntax: ServerPullReplication=value Description: Specifies that all scheduled replication initiated from this server must be pull-push replication. This server will not replicate back to the other server: 0 - Scheduled replication occurs normally (push-pull replication is not forced) 1 - This server pulls changes from other servers, but other servers cannot pull changes from this server This setting affects only scheduled replication. For example, to reduce the workload on a hub server, specify 1 for the ServerPullReplication setting on all spoke servers in a hub-and-spoke system. Applies to: Servers Default: None, although omitting this setting allows for normally scheduled replication. UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. ServerPushReplication Syntax: ServerPushReplication=value Description: Specifies that all scheduled replication initiated from this server must be push-pull replication. This server does not request that the other server replicate back. 0 - Scheduled replication occurs normally (push-pull replication is not forced) 1- Other servers pull changes from this server, but this server cannot pull changes from other servers Applies to: Servers Default: None, although omitting this setting allows for normally scheduled replication. UI equivalent: None Appendix C NOTES.INI Settings 1663
Page 1 and 2:
Lotus® Domino Version 7 Domino Adm
Page 3 and 4:
Contents Chapter 1. Deploying Domin
Page 5 and 6:
Upgrading from a beta release to Do
Page 7 and 8:
Adding a hosted organization to an
Page 9 and 10:
Configuring Domino to send and rece
Page 11 and 12:
Interoperability issues . . . . . .
Page 13 and 14:
Setting up automatic diagnostic dat
Page 15 and 16:
To start the cconsole program . . .
Page 17 and 18:
Max_NSDInfo_Files . . . . . . . . .
Page 19 and 20:
ImailLogout command . . . . . . . .
Page 21 and 22:
Chapter 1. Deploying Domino This ch
Page 23 and 24:
Looking at Acme’s diagram, you ca
Page 25 and 26:
For more information on installing
Page 27 and 28:
Example of how certifier IDs mirror
Page 29 and 30:
Name Characters Tips Organizational
Page 31 and 32:
Chapter 2. Setting Up the Domino Ne
Page 33 and 34:
The Notes Name Service resolves Dom
Page 35 and 36:
equester. A proxy can provide detai
Page 37 and 38:
Planning the TCP/IP network The def
Page 39 and 40:
Tip: Use policies to automate the s
Page 41 and 42:
3. Create an A record (or, for IPv6
Page 43 and 44:
To modify the Server Connection doc
Page 45 and 46:
Using IPv6 address formats with Dom
Page 47 and 48:
v If connecting or listening with a
Page 49 and 50:
Example 7 -- Microsoft Windows/Linu
Page 51 and 52:
Partitioned servers and IP addresse
Page 53 and 54:
Where serverportname is the name of
Page 55 and 56:
v For NetBIOS over TCP/IP, the syst
Page 57 and 58:
1. From the Domino Administrator or
Page 59 and 60:
Field Action Notes Network Enter th
Page 61 and 62:
destination server, the server obta
Page 63 and 64:
Setting up a secondary name server
Page 65 and 66:
Where TCPIPportname is the port nam
Page 67 and 68:
1. Add one entry in the local host
Page 69 and 70:
Note: Because Internet protocols ca
Page 71 and 72:
Confirming that TCP/IP is configure
Page 73 and 74:
v Associate each Notes network port
Page 75 and 76:
Chapter 3. Installing and Setting U
Page 77 and 78:
v Before running any Domino setup c
Page 79 and 80:
Concurrent I/O and Direct I/O not s
Page 81 and 82:
v Creates the Reports file, names i
Page 83 and 84:
For more information on Internet Si
Page 85 and 86:
6. Click ″Save & Close.″ 7. Rep
Page 87 and 88:
3. Enter the Secrets database filen
Page 89 and 90:
For complete information on working
Page 91 and 92:
By default, server setup is set to
Page 93 and 94:
4. On the client system, choose Sta
Page 95 and 96:
4. Continue through the setup progr
Page 97 and 98:
To use a setup profile from a Windo
Page 99 and 100:
v On a UNIX server, enter server -l
Page 101 and 102:
Create a replica of the Certificati
Page 103 and 104:
Field Action Expiration date (Optio
Page 105 and 106:
Field Action Certifier password Ent
Page 107 and 108:
The Domino server is configured to
Page 109 and 110:
3. Click the Basics tab, and comple
Page 111 and 112:
Field Enter Anonymous (Applies to a
Page 113 and 114:
Note: If the server program is runn
Page 115 and 116:
Chapter 4. Setting Up Server-to-Ser
Page 117 and 118:
For information about connecting se
Page 119 and 120:
can use a combination of topologies
Page 121 and 122:
Example of hub-and-spoke topology I
Page 123 and 124:
Example of mail and directory serve
Page 125 and 126:
A LAN Connection document can also
Page 127 and 128:
To gather information, the requesti
Page 129 and 130:
To connect a Domino server to an In
Page 131 and 132:
2. List the destination servers tha
Page 133 and 134:
Field Description Cause calling Spe
Page 135 and 136:
After you set up a hunt group, crea
Page 137 and 138:
Modem command files, which have the
Page 139 and 140:
To create a Network dialup connecti
Page 141 and 142:
5. Choose File - Document Propertie
Page 143 and 144:
Tab Field Description Replication/R
Page 145 and 146:
Tab Field Description Connect at ti
Page 147 and 148:
Field Description Port number Speci
Page 149 and 150:
DESC A one line description of the
Page 151 and 152:
Type of client and connection to Do
Page 153 and 154:
Chapter 5. Setting up Domino and DB
Page 155 and 156:
The DAV makes the data available di
Page 157 and 158:
v Domino with DB2 supports Domino s
Page 159 and 160:
Task Command to run task Descriptio
Page 161 and 162:
Domino and DB2 supported platforms
Page 163 and 164:
v DB2 UDB Enterprise Server Edition
Page 165 and 166:
Mixed platforms are supported for D
Page 167 and 168:
Domino server enablement and mappin
Page 169 and 170:
You are now ready to create views.
Page 171 and 172:
Note: When you create file systems
Page 173 and 174:
12. Determine whether your DB2 conf
Page 175 and 176:
18. From the Domino Administrator,
Page 177 and 178:
Setting up DB2 on Microsoft Windows
Page 179 and 180:
12. From the AIX OS or from the AIX
Page 181 and 182:
5. Logged in as the Domino user, st
Page 183 and 184:
Performing the DB2 Access server in
Page 185 and 186:
Note: If you are using Microsoft Wi
Page 187 and 188:
Field Action DB2 Node Name This fie
Page 189 and 190:
NOTES.INI setting Description DB2UD
Page 191 and 192:
Mapping the DB2 ID to a Notes ID in
Page 193 and 194:
Example For example, you can create
Page 195 and 196:
v Rename a DB2 class v Create a new
Page 197 and 198:
Procedure - Upgrading when you have
Page 199 and 200:
Upgrading to DB2 8.2.2 if you have
Page 201 and 202:
Copying a local copy of a database
Page 203 and 204:
5. Click Set. 6. (Optional) Select
Page 205 and 206:
2. Choose the server for which you
Page 207 and 208:
Domino Directory on the DB2 Access
Page 209 and 210:
Chapter 6. Setting Up Notes Users a
Page 211 and 212:
Alan Jones works in the Sales depar
Page 213 and 214:
The method you use to register peop
Page 215 and 216:
Field Default Set warning threshold
Page 217 and 218:
Information that does not replicate
Page 219 and 220:
If you create roaming users and do
Page 221 and 222:
Field Enter Mail system Choose one
Page 223 and 224:
Field Enter Location for storing us
Page 225 and 226:
Registering users with the Web Admi
Page 227 and 228:
Field Action Mail System Choose one
Page 229 and 230:
Field Action Mail System Choose one
Page 231 and 232:
11. Click the Address tab, and ente
Page 233 and 234:
Field Action Clean-up options Choos
Page 235 and 236:
Order Parameter Enter 11 Location D
Page 237 and 238:
4. If the server name that is shown
Page 239 and 240:
For information on multi-user insta
Page 241 and 242:
Running a silent install provides u
Page 243 and 244:
1. Invoke the InstallShield Tuner p
Page 245 and 246:
3. Use the InstallShield Tuner (6)
Page 247 and 248:
Using the SETUP.INI file setting to
Page 249 and 250:
Setting Description IM.Port IBM Lot
Page 251 and 252:
For more information about using sc
Page 253 and 254:
v Extract the language pack on a wo
Page 255 and 256:
Delaying the deployment of welcome
Page 257 and 258:
Chapter 7. Managing Notes Users Thi
Page 259 and 260:
Troubleshooting name changes The pu
Page 261 and 262:
New Alternate Name Information Avai
Page 263 and 264:
1. Make sure you have the following
Page 265 and 266:
is never prompted as to whether the
Page 267 and 268:
To verify the change The procedure
Page 269 and 270:
You can also move a user to another
Page 271 and 272:
4. To complete the move, in the Cho
Page 273 and 274:
7. Click Next. A message displays i
Page 275 and 276:
6. If you are working with clustere
Page 277 and 278:
To recertify a user ID Follow these
Page 279 and 280:
3. In the ″Choose a Certifier″
Page 281 and 282:
By default, administrators have Man
Page 283 and 284:
Chapter 8. Setting Up and Managing
Page 285 and 286:
Field Action Mail Domain Enter the
Page 287 and 288:
6. (Optional) Click the Comments ta
Page 289 and 290:
4. Complete these fields: Field Act
Page 291 and 292:
Field Action Members Add or remove
Page 293 and 294:
To find a group name with the Domin
Page 295 and 296:
Chapter 9. Creating Replicas and Sc
Page 297 and 298:
Note: If the server initiating the
Page 299 and 300:
particular privilege for a server e
Page 301 and 302:
Table of replication settings By de
Page 303 and 304:
v Users can’t categorize or edit
Page 305 and 306:
Specifying replication settings for
Page 307 and 308:
7. In the ″Repeat interval of″
Page 309 and 310:
To set up Connection documents for
Page 311 and 312:
You can also specify replication di
Page 313 and 314:
If you do not enable multiple repli
Page 315 and 316:
Each server, network, cluster, and
Page 317 and 318:
Chapter 10. Setting Up Calendars an
Page 319 and 320:
v If the Free Time system finds a N
Page 321 and 322:
The Resource Reservations database
Page 323 and 324:
v Room -- Typically a conference ro
Page 325 and 326:
6. Complete these fields Field Ente
Page 327 and 328:
If you delete a resource from the R
Page 329 and 330:
9. A message appears notifying you
Page 331 and 332:
Field Action Repeat until (Displays
Page 333 and 334:
Chapter 11. Using Policies Using po
Page 335 and 336:
In organizational policies, the hie
Page 337 and 338:
Planning and assigning policies Bef
Page 339 and 340:
1. Make sure that you have Editor a
Page 341 and 342:
v Check the field to create Notes I
Page 343 and 344:
6. On the Dial-up Connections tab,
Page 345 and 346:
Many of the tabs on the desktop pol
Page 347 and 348:
Field Action If running this versio
Page 349 and 350:
Field Enter SSL protocol version Ch
Page 351 and 352:
To create Security settings: 1. Mak
Page 353 and 354:
For more information, see the chapt
Page 355 and 356:
Field Action Earliest Allowable Key
Page 357 and 358:
Field Action Delete/Remove preferen
Page 359 and 360:
Field Action For new meetings, the
Page 361 and 362:
Field Action The following people o
Page 363 and 364:
If you choose not to include archiv
Page 365 and 366:
6. Under Archive locations, choose
Page 367 and 368:
Field Action Use customer-generated
Page 369 and 370:
Creating a policy document When you
Page 371 and 372:
Editing policies Use this procedure
Page 373 and 374:
v In the top right pane, selects on
Page 375 and 376:
v Open the Groups view, select one
Page 377 and 378:
Chapter 12. Setting Up Domain Searc
Page 379 and 380:
Tip: You can use replication events
Page 381 and 382:
10. Make sure the Catalog task is i
Page 383 and 384:
Page 385 and 386:
CAUTION: The security checking work
Page 387 and 388:
By default, the indexing server use
Page 389 and 390:
Manual setup from a Notes workstati
Page 391 and 392:
4. Click Browse Catalog. 5. In the
Page 393 and 394:
Chapter 13. Setting Up Domino Off-L
Page 395 and 396:
Name of Field Action Interval Speci
Page 397 and 398:
Syc Options Halt Conditions v Limit
Page 399 and 400:
Name of field Action Network Settin
Page 401 and 402:
If the application is DOLS-enabled,
Page 403 and 404:
When the user wants to open the app
Page 405 and 406:
6. Fill out the following fields in
Page 407 and 408:
Option Description Tighten security
Page 409 and 410:
Viewing DOLS download information T
Page 411 and 412:
SELECT From=@UserName|Form="DOLSOff
Page 413 and 414:
Chapter 14. Planning the Service Pr
Page 415 and 416:
For more information on setting up
Page 417 and 418:
Combination of IP address configura
Page 419 and 420:
Combined configuration You can use
Page 421 and 422:
Name Protocol The domain portion of
Page 423 and 424:
1. Reads the topic ″Installing th
Page 425 and 426:
Chapter 15. Setting Up the Service
Page 427 and 428:
To meet the requirements for creati
Page 429 and 430:
Where to store data for hosted orga
Page 431 and 432:
7. Complete these fields on the ID
Page 433 and 434:
For more information on extended AC
Page 435 and 436:
3. Chooses Tools - Hosted Organizat
Page 437 and 438:
For more information on Internet Si
Page 439 and 440:
Field Action Log checkpoint at midn
Page 441 and 442:
Chapter 16. Managing a Hosted Envir
Page 443 and 444:
The Domino service provider softwar
Page 445 and 446:
Moving a hosted organization that h
Page 447 and 448:
For more information on the Interne
Page 449 and 450:
v Add the hosted organization admin
Page 451 and 452:
Chapter 17. Setting Up the Administ
Page 453 and 454:
v Using a multifunction server as t
Page 455 and 456:
Administration Process support of s
Page 457 and 458:
Creating a Cross-domain Configurati
Page 459 and 460:
Task Administrator needs this acces
Page 461 and 462:
Task Rename users and convert users
Page 463 and 464:
New Processing Option Description R
Page 465 and 466:
Adminstration Request Documents: Ic
Page 467 and 468:
Using Selective Replication formula
Page 469 and 470:
Forcing an administration process r
Page 471 and 472:
Field Enter Store Admin Process log
Page 473 and 474:
Setting up an extended administrati
Page 475 and 476:
Message Occurs during Corrective ac
Page 477 and 478:
Message Occurs during Corrective ac
Page 479 and 480:
Chapter 18. Setting Up and Using Do
Page 481 and 482:
To update a server list The first t
Page 483 and 484:
4. Click the up or down arrows to c
Page 485 and 486:
Field Action Advanced Options Click
Page 487 and 488:
If you change the foreground or bac
Page 489 and 490:
Domino Administrator tools Most tab
Page 491 and 492:
Access control list: Default name A
Page 493 and 494:
Role Tab ServerAnalysis Server - An
Page 495 and 496:
about creating and modifying groups
Page 497 and 498:
Starting and stopping the Server Co
Page 499 and 500:
Chapter 19. Using Domino with Windo
Page 501 and 502:
Field Action User/group registratio
Page 503 and 504:
Field Action Registration Options C
Page 505 and 506:
hierarchy of organizational units a
Page 507 and 508:
Fields Action First name, Middle na
Page 509 and 510:
4. Choose one of these options: Fie
Page 511 and 512:
document for that Domino Directory
Page 513 and 514:
Chapter 20. Planning Directory Serv
Page 515 and 516:
v Should you use an extended ACL to
Page 517 and 518:
Planning new entries in the Domino
Page 519 and 520:
type-ahead addressing does not sear
Page 521 and 522:
Comparison of directory catalogs an
Page 523 and 524:
3. The primary Domino Directory on
Page 525 and 526:
Condensed Directory Catalog A direc
Page 527 and 528:
Chapter 21. Setting Up the Domino D
Page 529 and 530:
You can set up a Domino Directory a
Page 531 and 532:
A server that stores a Configuratio
Page 533 and 534:
You might want to customize the dat
Page 535 and 536:
You can assign a user to up to six
Page 537 and 538:
5. Complete any of these fields, an
Page 539 and 540:
Chapter 22. Setting Up the LDAP Ser
Page 541 and 542:
For example, if the distinguished n
Page 543 and 544:
Note: A server that runs the LDAP s
Page 545 and 546:
Setting Description For more inform
Page 547 and 548:
Field Enter Authentication options:
Page 549 and 550:
directory tree, but allow access to
Page 551 and 552:
To convert the default anonymous se
Page 553 and 554:
enable directory changes to be made
Page 555 and 556:
Examples of the ″Rules to follow.
Page 557 and 558:
Configuring the LDAP service to all
Page 559 and 560:
v If you see the prompt ″Unable t
Page 561 and 562:
xxx represents the text string to s
Page 563 and 564:
Statistic Description Sessions.Inbo
Page 565 and 566:
Chapter 23. Managing the LDAP Schem
Page 567 and 568:
How an LDAP attribute relates to a
Page 569 and 570:
Note: If the schema daemon finds th
Page 571 and 572:
For information about the fields in
Page 573 and 574:
A registered OID prefix begins with
Page 575 and 576:
Using the Schema database to add a
Page 577 and 578:
Extended Directory Catalog for whic
Page 579 and 580:
Chapter 24. Using the ldapsearch Ut
Page 581 and 582:
Using search filters with ldapsearc
Page 583 and 584:
Search Command Search the host ldap
Page 585 and 586:
Chapter 25. Setting Up Directory As
Page 587 and 588:
Note: A server’s primary Domino D
Page 589 and 590:
The following figure illustrates lo
Page 591 and 592:
For more information on creating ac
Page 593 and 594:
v A null character (nothing or a si
Page 595 and 596:
How naming rules relate to director
Page 597 and 598:
Directory assistance and failover f
Page 599 and 600:
5. To trust all the directories agg
Page 601 and 602:
Using directory assistance to contr
Page 603 and 604:
. Enter the name of the server on w
Page 605 and 606:
Field Enter Domain name The name of
Page 607 and 608:
Field Enter Replica# The server nam
Page 609 and 610:
Field Enter Attribute to be used as
Page 611 and 612:
Field Enter Dereference alias on se
Page 613 and 614:
Specifying a name and password for
Page 615 and 616:
To define custom search filters, yo
Page 617 and 618:
Once you have set up this feature,
Page 619 and 620:
Change Detection Mechanism Tested P
Page 621 and 622:
Basics tab Contents Comments Group
Page 623 and 624:
Basics tab Contents Comments Option
Page 625 and 626:
Chapter 26. Setting Up Directory Ca
Page 627 and 628:
v Users can flag mail for encryptio
Page 629 and 630:
a name hierarchy, and so forth. An
Page 631 and 632:
Assistance document for each Extend
Page 633 and 634:
Directory catalogs and Notes mail e
Page 635 and 636:
Types of documents the Dircat task
Page 637 and 638:
All groups aggregated as Multi-purp
Page 639 and 640:
v In a condensed Directory Catalog,
Page 641 and 642:
You can set up a server to use more
Page 643 and 644:
Setting the view sort order Unlike
Page 645 and 646:
Setting up Notes clients to use mor
Page 647 and 648:
2. Next to Server, select the Dirca
Page 649 and 650:
Note: See the topic ″Planning iss
Page 651 and 652:
Document/Database Field(s)/Tab(s) P
Page 653 and 654:
For information, see the topic ″E
Page 655 and 656:
Or you can do a full rebuild by cli
Page 657 and 658:
Chapter 27. Setting Up Extended ACL
Page 659 and 660:
v To delete a document, a Notes or
Page 661 and 662:
Note: The Administer access setting
Page 663 and 664:
Examples of precedence rules: Subje
Page 665 and 666:
Anonymous as subject As in the data
Page 667 and 668:
field called FullName, ListName, or
Page 669 and 670:
Example of using ″This container
Page 671 and 672:
Extended ACL: example 2 The Acme co
Page 673 and 674:
v Use names that represent groups o
Page 675 and 676:
v Click Add - Default to add the su
Page 677 and 678:
8. The Modified Forms section shows
Page 679 and 680:
Chapter 28. Overview of the Domino
Page 681 and 682:
POP3 and IMAP clients, which always
Page 683 and 684:
How mail routes in a Domino system
Page 685 and 686:
To help manage disk space, you can
Page 687 and 688:
Working with other mail systems in
Page 689 and 690:
Documents Description Adjacent and
Page 691 and 692:
Connection documents for mail routi
Page 693 and 694:
servers in the same Notes named net
Page 695 and 696:
mail1.acme.com or mail2.acme.com. I
Page 697 and 698:
Chapter 29. Setting Up Mail Routing
Page 699 and 700:
4. Click Yes when prompted to confi
Page 701 and 702:
Example of using one server for all
Page 703 and 704:
Example of using two servers to bal
Page 705 and 706:
If a user sends a MIME message to a
Page 707 and 708:
and have smarthost.acme.com listed
Page 709 and 710:
Configuration document or an All Se
Page 711 and 712:
In small Domino networks, you can m
Page 713 and 714:
Adjacent Domain documents do not pr
Page 715 and 716:
v Restricts mail from other domains
Page 717 and 718:
Restrictions that you set on this F
Page 719 and 720:
can set up a single relay host that
Page 721 and 722:
2. Choose Connections and click Add
Page 723 and 724:
1. Make sure that you prepared your
Page 725 and 726:
v Enable Domino to accept mail for
Page 727 and 728:
To create a Global Domain document:
Page 729 and 730:
6. Complete these fields, and then
Page 731 and 732:
6. Complete the following and click
Page 733 and 734:
To ensure that every user has a sta
Page 735 and 736:
can split external SMTP mail routin
Page 737 and 738:
For more information about Notes Di
Page 739 and 740:
7. For outbound SMTP connections, c
Page 741 and 742:
Chapter 30. Customizing the Domino
Page 743 and 744:
naming convention used when multipl
Page 745 and 746:
6. Complete this field in the Misce
Page 747 and 748:
set a warning threshold of 25MB on
Page 749 and 750:
Method for enforcing quotas Descrip
Page 751 and 752:
ased on usage, rather than file siz
Page 753 and 754:
Setting server mail rules You can c
Page 755 and 756:
Condition component Description Mes
Page 757 and 758:
How mail rules handle encrypted mes
Page 759 and 760:
Priority level Default Notes routin
Page 761 and 762:
1. From the Domino Administrator, c
Page 763 and 764:
Named Network (NNN). When using Not
Page 765 and 766:
6. Complete these fields in the Adv
Page 767 and 768:
You can use the following tools to
Page 769 and 770:
3. Click Configurations. 4. Select
Page 771 and 772:
Customizing Notes routing To custom
Page 773 and 774:
Changing the routing cost for a con
Page 775 and 776:
Field Enter Deny mail from domains
Page 777 and 778:
To determine whether the use of Int
Page 779 and 780:
Field Enter Enforce server access s
Page 781 and 782:
For information about enabling supp
Page 783 and 784:
have to enable the SSL port. If the
Page 785 and 786:
6. Complete these fields in the Inb
Page 787 and 788:
commonly referred to as electronic
Page 789 and 790:
Inbound Relay Controls Deny message
Page 791 and 792:
elay host or firewall to receive In
Page 793 and 794:
5. If the relay controls still appl
Page 795 and 796:
variable SMTPExpandDNSBLStats in th
Page 797 and 798:
Field Action Desired action when a
Page 799 and 800:
Whitelists can be used independentl
Page 801 and 802:
Inbound Sender Controls Deny messag
Page 803 and 804:
Field Description Allow messages in
Page 805 and 806:
Field Enter SSL negotiated over TCP
Page 807 and 808:
Outbound Sender Controls Deny messa
Page 809 and 810:
1. Make sure you already have a Con
Page 811 and 812:
disclaimers with combinations of ma
Page 813 and 814:
You can use Domino mail journaling
Page 815 and 816:
The change takes effect after the n
Page 817 and 818:
Size management method Description
Page 819 and 820:
You can specify settings for the fo
Page 821 and 822:
For a list of character set groups
Page 823 and 824:
Configuring how Domino converts out
Page 825 and 826:
Field Description Message Content S
Page 827 and 828:
7. Complete the following fields an
Page 829 and 830:
Field Choose Body - Encoding The en
Page 831 and 832:
To set advanced outbound MIME optio
Page 833 and 834:
For information on how to reload th
Page 835 and 836:
By default, the File Identification
Page 837 and 838:
Chapter 31. Setting Up Shared Mail
Page 839 and 840:
How Domino maintains the security o
Page 841 and 842:
Field name Enter Availability Speci
Page 843 and 844:
v Restore a shared mail database v
Page 845 and 846:
Note: The Domino Administrator main
Page 847 and 848:
To determine which mail files use s
Page 849 and 850:
Use these steps on each cluster mem
Page 851 and 852:
Note: Before you unlink a shared ma
Page 853 and 854:
Chapter 32. Setting Up the POP3 Ser
Page 855 and 856:
If the server uses Internet Site do
Page 857 and 858:
For more information on using the D
Page 859 and 860:
5. After Domino creates and opens t
Page 861 and 862:
Chapter 33. Setting Up the IMAP Ser
Page 863 and 864:
Note: The Domino Release 6, and mor
Page 865 and 866:
For information on configuring an I
Page 867 and 868:
3. Click Configurations. 4. Select
Page 869 and 870:
In addition to the personal namespa
Page 871 and 872:
5. Select the Configuration Setting
Page 873 and 874:
The session thread communicates dir
Page 875 and 876:
Field Enter Default IMAP SSL redire
Page 877 and 878:
Field Enter When receiving unencryp
Page 879 and 880:
1. From the Domino Administrator, o
Page 881 and 882:
This prevents Domino from routing m
Page 883 and 884:
adding RFC 822 phrases to users’
Page 885 and 886:
Field Description Incoming mail (IM
Page 887 and 888:
Chapter 34. Setting Up Domino Web A
Page 889 and 890:
Creating Portal URLs A portal is a
Page 891 and 892:
Page 893 and 894:
6. Save the document and restart th
Page 895 and 896:
Setting Action Directory type used
Page 897 and 898:
Setting Action Default cache scrubb
Page 899 and 900:
Browser Cache Management, this pref
Page 901 and 902:
4. Change the Target Form to DWALog
Page 903 and 904:
For example, to compress all text:
Page 905 and 906:
mail database. For users who access
Page 907 and 908:
v An alternative method is to use t
Page 909 and 910:
Part 1 -- Configure Microsoft Outlo
Page 911 and 912:
Chapter 35. Monitoring Mail This ch
Page 913 and 914:
To create the Reports database 1. F
Page 915 and 916:
MTC operation Description and Comma
Page 917 and 918:
Field Enter Sent Choose one: v Toda
Page 919 and 920:
Field Description Run this report S
Page 921 and 922:
You can open the Reports database (
Page 923 and 924:
Chapter 36. Setting Up the Domino W
Page 925 and 926:
Setting up a Domino server as a Web
Page 927 and 928:
3. (Optional) Click Internet Protoc
Page 929 and 930:
Example configuration Settings Comm
Page 931 and 932:
Field Action Port number Indicate t
Page 933 and 934:
There are some restrictions when us
Page 935 and 936:
Hosting Web sites using Web Server
Page 937 and 938:
Field Action Java URL path Enter th
Page 939 and 940:
To specify GIF conversion: Field En
Page 941 and 942:
For information on the Redirect URL
Page 943 and 944:
Field Enter Meta character set Choo
Page 945 and 946:
Character set group Mapping choices
Page 947 and 948:
The most important use of response
Page 949 and 950:
Field Action Custom header (HTTP Re
Page 951 and 952:
File protection documents provide l
Page 953 and 954:
If there is no realm specification
Page 955 and 956:
authentication, see the chapter ″
Page 957 and 958:
Improving Web server performance Af
Page 959 and 960:
Field Action Maximum requests per p
Page 961 and 962:
Chapter 37. Setting Up Domino to Wo
Page 963 and 964:
To install the WebSphere plug-in on
Page 965 and 966:
Setting up security for Microsoft I
Page 967 and 968:
v If you want to match the Windows
Page 969 and 970:
Chapter 38. Setting Up the Web Navi
Page 971 and 972:
Field Enter No proxy for these host
Page 973 and 974:
2. Click the Server Tasks - Web Ret
Page 975 and 976:
Agents The Web Navigator database c
Page 977 and 978:
Field Enter Font for text in the ,
Page 979 and 980:
4. Click Schedule and then specify
Page 981 and 982:
Using the Averaging agent to calcul
Page 983 and 984:
Chapter 39. Planning Security This
Page 985 and 986:
Plan and deliver employee training
Page 987 and 988:
For more information on securing de
Page 989 and 990:
For more information on setting up
Page 991 and 992:
Task Use Authenticate Web clients f
Page 993 and 994:
For more information on Smartcards,
Page 995 and 996:
Using both types of Domino Internet
Page 997 and 998:
Chapter 40. Controlling Access to D
Page 999 and 1000:
3. In the Server Access section, co
Page 1001 and 1002:
You do not need to list a user indi
Page 1003 and 1004:
v Manager access, with all access p
Page 1005 and 1006:
v Log key mismatches for all Notes
Page 1007 and 1008:
Controlling the use of headline mon
Page 1009 and 1010:
Field Action Cause calling Enter an
Page 1011 and 1012:
Field Action Run restricted Java/Ja
Page 1013 and 1014:
1. On the Domino server workstation
Page 1015 and 1016:
Chapter 41. Protecting and Managing
Page 1017 and 1018:
For more information on using Inter
Page 1019 and 1020:
CAUTION: In order for Notes users t
Page 1021 and 1022:
Each time a user changes a password
Page 1023 and 1024:
To lock out an individual user’s
Page 1025 and 1026:
v Administrators export recovery in
Page 1027 and 1028:
v If you are not using a server-bas
Page 1029 and 1030:
Use the Notes.ini variable ID_Recov
Page 1031 and 1032:
Note: This is done in addition to t
Page 1033 and 1034:
Adding a Notes public key to the Do
Page 1035 and 1036:
Note: The archived keys remain in t
Page 1037 and 1038:
Adding cross-certificates to the Do
Page 1039 and 1040:
Your local Domino Directory does no
Page 1041 and 1042:
3. Select whether to use a CA-enabl
Page 1043 and 1044:
Displaying cross-certificates To vi
Page 1045 and 1046:
Chapter 42. Controlling User Access
Page 1047 and 1048:
Types of ACL entries Wildcard entri
Page 1049 and 1050:
For more information about alternat
Page 1051 and 1052:
Anonymous not listed in database AC
Page 1053 and 1054:
10. (Optional) Enforce a consistent
Page 1055 and 1056:
To view ACL entries by access level
Page 1057 and 1058:
Page 1059 and 1060:
Roles list box on the Basics panel
Page 1061 and 1062:
Setting up the Administration Proce
Page 1063 and 1064:
Using the ACL log You can display a
Page 1065 and 1066:
The set of URLs that gets restricte
Page 1067 and 1068:
Chapter 43. Protecting User Worksta
Page 1069 and 1070:
Access option If enabled, allows fo
Page 1071 and 1072:
with default settings that are code
Page 1073 and 1074:
For more information, see the topic
Page 1075 and 1076:
as an entry in the Admin ECL. You t
Page 1077 and 1078:
Chapter 44. Setting Up Name-and-Pas
Page 1079 and 1080:
v If you set up SSL on the server a
Page 1081 and 1082:
owswer, and the browser sends the c
Page 1083 and 1084:
1. In the Domino Directory, create
Page 1085 and 1086:
6. Enter the name of the custom log
Page 1087 and 1088:
Example Description alan_jones@acme
Page 1089 and 1090:
then the custom password policy wil
Page 1091 and 1092:
Be sure that your client location d
Page 1093 and 1094:
c. Enter the password (specified wh
Page 1095 and 1096:
4. In the Web SSO Configuration fie
Page 1097 and 1098:
v Any appropriate LDAP attribute, a
Page 1099 and 1100:
Validation and authentication for I
Page 1101 and 1102:
Chapter 45. Encryption and Electron
Page 1103 and 1104:
shouldn’t create only North Ameri
Page 1105 and 1106:
v The user selects ″MIME format
Page 1107 and 1108:
4. Notes or the mail application co
Page 1109 and 1110:
Chapter 46. Setting Up a Domino Ser
Page 1111 and 1112:
3. Add certifiers to the CA process
Page 1113 and 1114:
3. (Optional) In the Administrators
Page 1115 and 1116:
Option Security level Password requ
Page 1117 and 1118:
Key usage extension Description Dat
Page 1119 and 1120:
Field Action Extended key usages Ch
Page 1121 and 1122:
v Open the Administrator’s mail f
Page 1123 and 1124:
8. The time period in which the Adm
Page 1125 and 1126:
5. Click Save and Close. CAUTION: I
Page 1127 and 1128:
Chapter 47. Setting Up SSL on a Dom
Page 1129 and 1130:
Every server certificate includes a
Page 1131 and 1132:
From a Domino CA using a Web browse
Page 1133 and 1134:
For more information, see the topic
Page 1135 and 1136:
6. Do one of the following: v If yo
Page 1137 and 1138:
Field Enter Client certificate Choo
Page 1139 and 1140:
Changing the password for the serve
Page 1141 and 1142:
v In an Internet Site document. If
Page 1143 and 1144:
Chapter 48. Setting Up Clients for
Page 1145 and 1146:
To obtain a trusted root certificat
Page 1147 and 1148:
5. Check to make sure that the name
Page 1149 and 1150:
Note: The client cannot use the cer
Page 1151 and 1152:
For information on creating cross-c
Page 1153 and 1154:
signatures to the Contact document.
Page 1155 and 1156:
5. Save the document. Tip: If the c
Page 1157 and 1158:
Chapter 49. Rolling Out Databases T
Page 1159 and 1160:
Mandatory tasks Perform these tasks
Page 1161 and 1162:
You can assign ACL settings (includ
Page 1163 and 1164:
3. Choose Tools - Database - Sign.
Page 1165 and 1166:
Chapter 50. Organizing Databases on
Page 1167 and 1168:
7. Click OK. 8. To verify that the
Page 1169 and 1170:
Chapter 51. Setting Up and Managing
Page 1171 and 1172:
Indexing option Description Index a
Page 1173 and 1174:
3. Choose File - Database - Access
Page 1175 and 1176:
Chapter 52. Setting Up Database Lib
Page 1177 and 1178:
5. Choose Edit - Delete. Database c
Page 1179 and 1180:
Chapter 53. Monitoring the Domino S
Page 1181 and 1182:
Monitoring events on the Domino sys
Page 1183 and 1184:
Field Action Trigger the event when
Page 1185 and 1186:
5. Click the Probe tab, and complet
Page 1187 and 1188:
1. Make sure that the ISpy task is
Page 1189 and 1190:
Event handlers An event handler def
Page 1191 and 1192:
Passing event parameters using the
Page 1193 and 1194:
Creating an event handler When you
Page 1195 and 1196:
v By Type 4. Double-click the Event
Page 1197 and 1198:
6. Do one to restart the Domino Adm
Page 1199 and 1200:
Field Action Collection alarm inter
Page 1201 and 1202:
v Fixed -- Statistic values that do
Page 1203 and 1204:
The information in these reports pr
Page 1205 and 1206:
Exporting statistics to a spreadshe
Page 1207 and 1208:
To change the color of a statistic:
Page 1209 and 1210:
Chapter 54. Using the Domino SNMP a
Page 1211 and 1212:
The text message of the Domino even
Page 1213 and 1214:
For additional information, refer t
Page 1215 and 1216:
There are several different ways to
Page 1217 and 1218:
Note: The Domino SNMP Agent is set
Page 1219 and 1220:
If you are not using the NET-SNMP M
Page 1221 and 1222:
The pw.src should resemble the foll
Page 1223 and 1224:
Manually starting and stopping the
Page 1225 and 1226:
Creating and Configuring your own N
Page 1227 and 1228:
ovstart Removing traps To remove th
Page 1229 and 1230:
Chapter 55. Using Server Health Mon
Page 1231 and 1232:
Statistic Rating Explanation Health
Page 1233 and 1234:
Selecting server components to incl
Page 1235 and 1236:
To display a current health report:
Page 1237 and 1238:
However, the Server Health Monitor
Page 1239 and 1240:
Chapter 56. Monitoring Domino Domai
Page 1241 and 1242:
v Replication probes v Security pro
Page 1243 and 1244:
Page 1245 and 1246:
Field Action Severity Choose the se
Page 1247 and 1248:
Directory Probe name Description Di
Page 1249 and 1250:
Field Action Should this probe run
Page 1251 and 1252:
Field Action Timeout for open attem
Page 1253 and 1254:
the probe runs on Server A (origina
Page 1255 and 1256:
Field Action Should this probe run
Page 1257 and 1258:
Field Action Which servers should r
Page 1259 and 1260:
Server probes There is one server p
Page 1261 and 1262:
Field Action Probe Description Type
Page 1263 and 1264:
Deleting a DDM Probe document When
Page 1265 and 1266:
Example of a DDM server collection
Page 1267 and 1268:
Adding subordinate servers to the D
Page 1269 and 1270:
The first time that an event is log
Page 1271 and 1272:
Changing the state of an event in D
Page 1273 and 1274:
administrator names that displays i
Page 1275 and 1276:
Chapter 57. Transaction Logging and
Page 1277 and 1278:
If the database is not yet complete
Page 1279 and 1280:
Field Action Logging style** Choose
Page 1281 and 1282:
Fault recovery You can set up fault
Page 1283 and 1284:
7. Click Create. Collecting diagnos
Page 1285 and 1286:
Field Action Maximum size of NSD ou
Page 1287 and 1288:
NOTES.INI setting MAX_NSDINFO_FILES
Page 1289 and 1290:
Chapter 58. Using Log Files This ch
Page 1291 and 1292:
View Contains information about Rep
Page 1293 and 1294:
Analyzing Domino log files using an
Page 1295 and 1296:
When you log to a text file, the fo
Page 1297 and 1298:
Field Enter Referer log The prefix
Page 1299 and 1300:
Chapter 59. Setting Up Activity Log
Page 1301 and 1302:
as a result of the request, the amo
Page 1303 and 1304:
v Open records, which log when a se
Page 1305 and 1306:
If a session ends before authentica
Page 1307 and 1308:
1. From the Domino Administrator, o
Page 1309 and 1310:
Chapter 60. Maintaining Databases T
Page 1311 and 1312:
v Quota v Warning v Created v Last
Page 1313 and 1314:
For more information on the Databas
Page 1315 and 1316:
For information on designing forms
Page 1317 and 1318:
Tip: To track usage over a period o
Page 1319 and 1320:
Indexer tasks: Update and Updall Th
Page 1321 and 1322:
Updall: Updall is similar to Update
Page 1323 and 1324:
Updall - Rebuild options: Option in
Page 1325 and 1326:
Shortcut Description When to use SH
Page 1327 and 1328:
Note: When views are being rebuilt
Page 1329 and 1330:
v Run Fixup using a console command
Page 1331 and 1332:
4. Enter the following command in o
Page 1333 and 1334:
5. From the Domino Administrator, i
Page 1335 and 1336:
6. In the Tools pane on the right,
Page 1337 and 1338:
Running a database analysis 1. From
Page 1339 and 1340:
Chapter 61. Maintaining Domino Serv
Page 1341 and 1342:
For more information on policy sett
Page 1343 and 1344:
Each item is represented by a docum
Page 1345 and 1346:
Database comparison Explanation Rep
Page 1347 and 1348:
v Skip -- if you are recertifying m
Page 1349 and 1350:
Chapter 62. Using Activity Trends T
Page 1351 and 1352:
Field Action Days of the week to co
Page 1353 and 1354:
Page 1355 and 1356:
3. Select the statistic you want to
Page 1357 and 1358:
Page 1359 and 1360:
5. Complete these fields to specify
Page 1361 and 1362:
server, 10 databases may account fo
Page 1363 and 1364:
v Change the layout of the Activity
Page 1365 and 1366:
v Light -- The light bin is the top
Page 1367 and 1368:
Field Action Type Choose one: Role
Page 1369 and 1370:
5. The field ″Submit to″ displa
Page 1371 and 1372:
Option Action reset Resets the inte
Page 1373 and 1374:
The workflow for processing a plan
Page 1375 and 1376:
To view database moves in the resou
Page 1377 and 1378:
Field Action Category (Optional) Se
Page 1379 and 1380:
5. On the Basics tab, complete thes
Page 1381 and 1382:
Chapter 63. Improving Server Perfor
Page 1383 and 1384:
v Use multiple I/O controllers to d
Page 1385 and 1386:
Default is 30 minutes. A longer int
Page 1387 and 1388:
For more information on database pe
Page 1389 and 1390:
Improving Windows 2000 server perfo
Page 1391 and 1392:
Chapter 64. Improving Database Perf
Page 1393 and 1394:
If you select or deselect the ″Do
Page 1395 and 1396:
v The database contains many docume
Page 1397 and 1398:
Database cache size By default, the
Page 1399 and 1400:
v Use replication settings to limit
Page 1401 and 1402:
If you have specified a value for t
Page 1403 and 1404:
Compact - Style Option Command-line
Page 1405 and 1406:
Running Compact using a console com
Page 1407 and 1408:
Deleting inactive documents Regular
Page 1409 and 1410:
6. (Optional) To archive deleted do
Page 1411 and 1412:
Chapter 65. Using Server.Load This
Page 1413 and 1414:
Statistic Description Database.NIFP
Page 1415 and 1416:
Messaging Statistic Description Tot
Page 1417 and 1418:
To see the actual code of each scri
Page 1419 and 1420:
2. Set the Thread Creation Interval
Page 1421 and 1422:
3. Choose File - Save Settings. 4.
Page 1423 and 1424:
Running the test: 1. Start Server.L
Page 1425 and 1426:
7. In the ″Build Recipient List u
Page 1427 and 1428:
Variable Action IMAPHost Enter the
Page 1429 and 1430:
v System under test (SUT) Test Init
Page 1431 and 1432:
3. At the end of the test, Issue a
Page 1433 and 1434:
Setting Use this value Number of Ma
Page 1435 and 1436:
Access rights: The user that you de
Page 1437 and 1438:
Initial or subsequent disk requirem
Page 1439 and 1440:
v Log_MailRouting. Set to 20 for mi
Page 1441 and 1442:
5. Click the Script Variables tab,
Page 1443 and 1444:
11. Click Start Test. Idle workload
Page 1445 and 1446:
To read the code in the test script
Page 1447 and 1448:
Initial or subsequent disk requirem
Page 1449 and 1450:
script loop count = 1 Note: This se
Page 1451 and 1452:
Chapter 66. Troubleshooting Even wi
Page 1453 and 1454:
Required information Your system Op
Page 1455 and 1456:
Insufficient memory - Admin’s req
Page 1457 and 1458:
The following two statistics record
Page 1459 and 1460:
1. If the agent runs to completion
Page 1461 and 1462:
The Cluster Database Directory incl
Page 1463 and 1464:
Server backup is occurring during w
Page 1465 and 1466:
6. Paste or enter the Note ID or UN
Page 1467 and 1468:
v db2 => Import from F:\TEST\NSFOBJ
Page 1469 and 1470:
Resolving the problem: Complete the
Page 1471 and 1472:
table "DWA1.NSFOBJNAM" from having
Page 1473 and 1474:
For instructions on creating the se
Page 1475 and 1476:
Directories -- Troubleshooting Thes
Page 1477 and 1478:
″Directory assistance could not a
Page 1479 and 1480:
2. If you are trusting all the aggr
Page 1481 and 1482:
must also allow anonymous read acce
Page 1483 and 1484:
The Target box doesn’t show docum
Page 1485 and 1486:
Page 1487 and 1488:
1. Check the replication history of
Page 1489 and 1490:
6. Check for problems with modem co
Page 1491 and 1492:
18. Refresh the view so that all of
Page 1493 and 1494:
3. Make sure the communication port
Page 1495 and 1496:
(Platform.System.PctCombinedCpuUtil
Page 1497 and 1498:
Even if you can use the ping utilit
Page 1499 and 1500:
For more information about setting
Page 1501 and 1502:
v Edit the Port_MaxSessions setting
Page 1503 and 1504:
For Notes and Domino to work proper
Page 1505 and 1506:
After you finish checking name reso
Page 1507 and 1508:
Note: When setting the NOTES.INI va
Page 1509 and 1510:
Replication history: The replicatio
Page 1511 and 1512:
3. Check the log file for a ″Repl
Page 1513 and 1514:
Somebody modified the access contro
Page 1515 and 1516:
CA process takes a long time to mak
Page 1517 and 1518:
2. Make sure the Server document is
Page 1519 and 1520:
v System level patches v Server har
Page 1521 and 1522:
Code Meaning Cause 0 Divide error T
Page 1523 and 1524:
v Debug_Smart_Upgrade -- Use this v
Page 1525 and 1526:
Users are prompted multiple times f
Page 1527 and 1528:
Domino server name IP Host name IP
Page 1529 and 1530:
procedures, back up files directly
Page 1531 and 1532:
Appendix A Server Commands You can
Page 1533 and 1534:
Description: Sends a message to spe
Page 1535 and 1536:
Description: Displays a list of ser
Page 1537 and 1538:
To check the status of the Replicat
Page 1539 and 1540:
To optimize resources Domino only r
Page 1541 and 1542:
Route Marketing\Acme -- Sends mail
Page 1543 and 1544:
v To clear a password, select ″Cl
Page 1545 and 1546:
Description: Displays the current v
Page 1547 and 1548:
Description: The Show Memory server
Page 1549 and 1550:
Description: Shows single copy obje
Page 1551 and 1552:
server console to display statistic
Page 1553 and 1554:
Description: Displays a list of all
Page 1555 and 1556:
Start Port Syntax: Start Port portn
Page 1557 and 1558:
v Agent Manager v Certificate Autho
Page 1559 and 1560:
Command Result Tell Amgr Schedule S
Page 1561 and 1562:
Command Result Tell Clrepl Quit Sto
Page 1563 and 1564:
Command Result Tell Router Compact
Page 1565 and 1566:
Command Result Tell HTTP Refresh Re
Page 1567 and 1568:
Arguments Set -- Sets DB2 access fo
Page 1569 and 1570:
GROUP GROUP SIZE STATUS PATH NSF SI
Page 1571 and 1572:
The Domino server’s DB2 purge tas
Page 1573 and 1574:
Controller command Description Disa
Page 1575 and 1576:
Adding commands to the Commands men
Page 1577 and 1578:
Switch Result -f Lets you enter the
Page 1579 and 1580:
Appendix B Server Tasks This chapte
Page 1581 and 1582:
Task Command to run task Descriptio
Page 1583 and 1584:
Appendix C NOTES.INI Settings Appen
Page 1585 and 1586:
asterisk represents everyone listed
Page 1587 and 1588:
Description: By default, a mail-tri
Page 1589 and 1590:
UI equivalent: None, although you c
Page 1591 and 1592:
UI equivalent: None, although you c
Page 1593 and 1594:
Applies to: Servers Default: None,
Page 1595 and 1596:
This setting can be changed at any
Page 1597 and 1598:
Applies to: Server Default: None UI
Page 1599 and 1600:
DB2UDFPath Syntax: DB2Path=pathname
Page 1601 and 1602:
Applies to: Servers Default: None U
Page 1603 and 1604:
sets the lifetime of indexes to 60
Page 1605 and 1606:
Default: The default value is 10 mi
Page 1607 and 1608:
0 - Show Errors & Warnings only 1 -
Page 1609 and 1610:
UI equivalent: None DisabledPorts S
Page 1611 and 1612:
Description: If the Domino Web serv
Page 1613 and 1614:
Description: If this variable is se
Page 1615 and 1616:
is observed in the United States.)
Page 1617 and 1618:
1 - Always empty the Trash folder b
Page 1619 and 1620:
FaultRecoveryFromINI Syntax: FaultR
Page 1621 and 1622:
Applies to: Workstations Default: N
Page 1623 and 1624:
Description: (Domino 7 only) Use th
Page 1625 and 1626:
Description: Prior to Domino 7, if
Page 1627 and 1628:
IMAPDisableMsgCache Syntax: IMAPDis
Page 1629 and 1630:
Description: Use this variable when
Page 1631 and 1632: iNotes_WA_DisableBothFormats Syntax
Page 1633 and 1634: UI equivalent: none iNotes_WA_Logou
Page 1635 and 1636: iNotes_WA_NamePickerSearchAccentIns
Page 1637 and 1638: FORMS7.nsf. You can use the style r
Page 1639 and 1640: messages sent S/MIME signed or encr
Page 1641 and 1642: Description: Specifies the maximum-
Page 1643 and 1644: KeyFileName Syntax: KeyFileName=pat
Page 1645 and 1646: for the GroupType attribute can be
Page 1647 and 1648: UI equivalent: None LDAPName_Update
Page 1649 and 1650: T:64 E:1: S:64:22 A:4:1 L:N:I:N Aut
Page 1651 and 1652: Log_Replication Syntax: Log_Replica
Page 1653 and 1654: 1 - Log messages when views are reb
Page 1655 and 1656: Default: In the absence of the sett
Page 1657 and 1658: Mail_Skip_NoKey_Dialog Syntax: Mail
Page 1659 and 1660: Applies to: Servers Default: 10 UI
Page 1661 and 1662: UI equivalent: None MTMaxResponses
Page 1663 and 1664: NetWareSocket Syntax: NetWareSocket
Page 1665 and 1666: NoMailMenu Syntax: NoMailMenu=value
Page 1667 and 1668: Description: This variable reflects
Page 1669 and 1670: 5 - Full trace information plus dri
Page 1671 and 1672: Default: None UI equivalent: None P
Page 1673 and 1674: ProgramMode Syntax: ProgramMode=val
Page 1675 and 1676: Description: Use this setting to en
Page 1677 and 1678: Default: 7 UI equivalent: None Sche
Page 1679 and 1680: Schema_Daemon_Resynctime Syntax: Sc
Page 1681: Default: 0 UI equivalent: None, alt
Page 1685 and 1686: Server_Show_Performance Syntax: Ser
Page 1687 and 1688: Description: Identifies the setup d
Page 1689 and 1690: RC2_56 RC2_64 RC2_80 RC2_128 RC5_5
Page 1691 and 1692: Default: In the absence of this set
Page 1693 and 1694: 0 - Entries in the Allow field of t
Page 1695 and 1696: 2 - Require the RFC822 From header
Page 1697 and 1698: TCP_EnableIPV6 Syntax: TCP_EnableIP
Page 1699 and 1700: Applies to: Servers and workstation
Page 1701 and 1702: TransLog_UseAll Syntax: TransLog_Us
Page 1703 and 1704: Updaters Syntax: Updaters=number of
Page 1705 and 1706: Parameter Enter value4 Not currentl
Page 1707 and 1708: Window_Title Syntax: Window_Title=t
Page 1709 and 1710: Appendix D System and Application T
Page 1711 and 1712: Template title and file name Templa
Page 1713 and 1714: Template title and file name Templa
Page 1715 and 1716: Appendix E Customizing the Domino D
Page 1717 and 1718: The only reason to use the Domino D
Page 1719 and 1720: v Create a new LDAP structural obje
Page 1721 and 1722: Note: You can use a backslash (\) i
Page 1723 and 1724: For more information, see the topic
Page 1725 and 1726: 4. Open the $xxxInheritableSchema s
Page 1727 and 1728: To add the auxiliary object class t
Page 1729 and 1730: Upgrading to a new Domino Directory
Page 1731 and 1732: Appendix F Administration Process R
Page 1733 and 1734:
Recertify users Register hosted org
Page 1735 and 1736:
Create replica Create a Roaming Use
Page 1737 and 1738:
Update domain catalog configuration
Page 1739 and 1740:
Triggered by: A user initiating an
Page 1741 and 1742:
Result: A new replica of the databa
Page 1743 and 1744:
Carried out on: Server on which the
Page 1745 and 1746:
Carried out: According to the ″In
Page 1747 and 1748:
Result: The Administration Process
Page 1749 and 1750:
Carried out on: The deleted person
Page 1751 and 1752:
Carried out on: The administration
Page 1753 and 1754:
Request Replica Deletion: This requ
Page 1755 and 1756:
Result: Each server in the domain d
Page 1757 and 1758:
For more information on this reques
Page 1759 and 1760:
Result: Creates a replica copy of t
Page 1761 and 1762:
Result: The old mail file is delete
Page 1763 and 1764:
Carried out on: The destination ser
Page 1765 and 1766:
v Source database is full-text inde
Page 1767 and 1768:
moving roaming files are listed her
Page 1769 and 1770:
Page 1771 and 1772:
Page 1773 and 1774:
Carried out on: The administration
Page 1775 and 1776:
For information on renaming a Web u
Page 1777 and 1778:
Carried out on: Each server in the
Page 1779 and 1780:
Carried out: When you approve or re
Page 1781 and 1782:
Carried out on: Each server in the
Page 1783 and 1784:
Result: Updates the password and us
Page 1785 and 1786:
Result: Updates the Certifier docum
Page 1787 and 1788:
Carried out: Immediately Result: Up
Page 1789 and 1790:
Carried out on: On the administrati
Page 1791 and 1792:
Web set Soft Deletion Expire Time T
Page 1793 and 1794:
Carried out: According to the ″De
Page 1795 and 1796:
Result: The Administration Process
Page 1797 and 1798:
Result: Creates the replica on the
Page 1799 and 1800:
Result: The server name is removed
Page 1801 and 1802:
Delete in Reader / Author fields: T
Page 1803 and 1804:
Result: Updates the person’s name
Page 1805 and 1806:
Rename server in Domino Directory:
Page 1807 and 1808:
Check access for non-cluster move r
Page 1809 and 1810:
Appendix G Accessibility and Keyboa
Page 1811 and 1812:
Keyboard shortcuts for databases Yo
Page 1813 and 1814:
Press To do this RIGHT ARROW Move t
Page 1815 and 1816:
Press To do this DELETE Delete sele
Page 1817 and 1818:
Appendix H Server.Load Command Lang
Page 1819 and 1820:
Note: You need to add a value for t
Page 1821 and 1822:
Example 2 Using changeto to create
Page 1823 and 1824:
Drop command Use in a Server.Load s
Page 1825 and 1826:
Syntax If [Value] [Command] Where:
Page 1827 and 1828:
Index command Used in a Server.Load
Page 1829 and 1830:
NEXT_EXPANDED_SELECTED, NEXT_EXPAND
Page 1831 and 1832:
Quit command Used in a Server.Load
Page 1833 and 1834:
Message Body Size Attachment size (
Page 1835 and 1836:
Syntax Web Mail workload usage of W
Page 1837 and 1838:
v If nthiteration = 1, the command
Page 1839 and 1840:
Appendix I Server.Load Scripts This
Page 1841 and 1842:
To issue remote console commands Th
Page 1843 and 1844:
**Pause 10 to 20 seconds** Pause 10
Page 1845 and 1846:
**Reset initial document count by d
Page 1847 and 1848:
Open **Close the view** close EndCr
Page 1849 and 1850:
pause 0 - 180000 **Start the part o
Page 1851 and 1852:
Appendix J Setting Up a Domino 5 Ce
Page 1853 and 1854:
3. Enter the old password, and then
Page 1855 and 1856:
3. Click Dump CA Key Ring to Text.
Page 1857 and 1858:
Appendix K Upgrading Notes Clients
Page 1859 and 1860:
Notes Client Feature Instant Messag
Page 1861 and 1862:
Mail Rules: Formula rewrite to impr
Page 1863 and 1864:
UI Indicator for LotusScript debugg
Page 1865 and 1866:
options for further delay. If the s
Page 1867 and 1868:
Note: Lotus Notes Smart Upgrade fir
Page 1869 and 1870:
In this field Do this Destination v
Page 1871 and 1872:
Running a silent upgrade using opti
Page 1873 and 1874:
A user who is not assigned to the L
Page 1875 and 1876:
Index Special characters $AdminP Vi
Page 1877 and 1878:
Archiving agents for 1388, 1389 dat
Page 1879 and 1880:
Compound document format. See Notes
Page 1881 and 1882:
DDM Probes (continued) scheduling a
Page 1883 and 1884:
Domains (continued) mail routing 69
Page 1885 and 1886:
Error messages (continued) OS/2 150
Page 1887 and 1888:
Host names (continued) specifying i
Page 1889 and 1890:
Internet passwords (continued) user
Page 1891 and 1892:
Loopback addresses creating 413 Lot
Page 1893 and 1894:
Monitoring (continued) performance
Page 1895 and 1896:
Passthru connections activity loggi
Page 1897 and 1898:
R6IMAP Initialization workload sett
Page 1899 and 1900:
Sametime (continued) and scriptable
Page 1901 and 1902:
Server-based certification authorit
Page 1903 and 1904:
SMTPGreeting setting described 1671
Page 1905 and 1906:
Transform files applying 226 for en
Page 1907 and 1908:
Web sites (continued) authenticatio
Page 1909 and 1910:
Licensees of this program who wish
show all

Lotus Domino Administrator 7 Help - Lotus documentation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?