Lotus Domino Administrator 7 Help - Lotus documentation

More documents

Recommendations

Info

Server_Restart_Delay Syntax: Server_Restart_Delay=number of seconds Description: Specifies the amount of time (in seconds) the server waits before restarting with the ’restart server’ console command. Applies to: Servers Default: None, although by default, Domino waits 10 seconds. UI equivalent: None Server_Restricted Syntax: Server_Restricted=value Description: Enables or disables server access to a server. If access is disabled, the server does not accept new Open Database requests. Note: For Domino 6.0 and subsequent releases, any administrator can still open databases, even if this variable is used to restrict server access. Use the following values to set this variable: 0 - Server access is unrestricted 1 - Server access is restricted for the current server session. Restarting the server clears the setting. 2 - Server access is restricted persistently, even after server restarts Applies to: Servers Default: None UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. Server_Session_Timeout Syntax: Server_Session_Timeout=number of minutes Description: Specifies the number of minutes of inactivity after which the server automatically terminates network and mobile connections. The minimum recommended setting is 30-45 minutes. A lower setting may negatively impact server performance. The ideal setting depends on factors such as server load and the number of concurrent users on the server. For mobile connections, XPC has its own internal time-out. If the XPC time-out value is shorter than the Server_Session_Timeout value, the XPC time-out takes precedence. Applies to: Servers Default: No default entry, but in the absence of the setting, Domino terminates a session connection after 240 minutes of inactivity (four hours). UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. 1664 Lotus Domino Administrator 7 Help
Server_Show_Performance Syntax: Server_Show_Performance=value Description: Specifies whether or not server performance events are displayed on the console. 1 - Displays server performance events on console Applies to: Servers Default: None UI equivalent: None, although you can specify this setting in the NOTES.INI Settings tab of the Configuration Settings document in the Domino Directory. ServerTasks Syntax: ServerTasks=name(s) Description: Specifies the tasks that begin automatically at server startup and continue until the server is shut down. For example: ServerTasks=Replica, Router, Update, Stats, AMgr, Adminp, Sched, CalConn, Collect, MTC, RunJava ISpy The server runs the Replicator, Router, Indexer, Stats, Agent Manager, Administration Process, Schedule Manager, Calendar Connector, Collector, Mail Tracker Collector, and Mail Probe server tasks. Each task increases the server’s load and may adversely affect server performance. Note thatThe server runs the Replicator, Router, Indexer, Stats, Agent Manager, Administration Process, Schedule Manager, Calendar Connector, Collector, Mail Tracker Collector, and Mail Probe server tasks. Each task increases the server’s load and may adversely affect server performance. Note that the ISpy server task name is case sensitive and must be specified exactly as shown. Applies to: Servers Default: Replica, Router, Update, Stats, AMgr, Adminp, Sched, CalConn, Billing UI equivalent: None ServerTasksAthour Syntax: ServerTasksAthour=name(s) Description: Schedules automatic server and database maintenance functions. Enter the time in 24-hour format, where 0 is 12 AM (midnight) and 23 is 11 PM. For example: ServerTasksAt3=Catalog ServerTasksAt7=Updall ServerTasksAt16=Catalog, Updall, Statlog At 3 AM, the server runs the Catalog task. At 7 AM, the server runs the Updall task. At 4 PM, the server runs the Catalog, Updall, and Statistics tasks. Applies to: Servers Default: Appendix C NOTES.INI Settings 1665
Page 1 and 2:
Lotus® Domino Version 7 Domino Adm
Page 3 and 4:
Contents Chapter 1. Deploying Domin
Page 5 and 6:
Upgrading from a beta release to Do
Page 7 and 8:
Adding a hosted organization to an
Page 9 and 10:
Configuring Domino to send and rece
Page 11 and 12:
Interoperability issues . . . . . .
Page 13 and 14:
Setting up automatic diagnostic dat
Page 15 and 16:
To start the cconsole program . . .
Page 17 and 18:
Max_NSDInfo_Files . . . . . . . . .
Page 19 and 20:
ImailLogout command . . . . . . . .
Page 21 and 22:
Chapter 1. Deploying Domino This ch
Page 23 and 24:
Looking at Acme’s diagram, you ca
Page 25 and 26:
For more information on installing
Page 27 and 28:
Example of how certifier IDs mirror
Page 29 and 30:
Name Characters Tips Organizational
Page 31 and 32:
Chapter 2. Setting Up the Domino Ne
Page 33 and 34:
The Notes Name Service resolves Dom
Page 35 and 36:
equester. A proxy can provide detai
Page 37 and 38:
Planning the TCP/IP network The def
Page 39 and 40:
Tip: Use policies to automate the s
Page 41 and 42:
3. Create an A record (or, for IPv6
Page 43 and 44:
To modify the Server Connection doc
Page 45 and 46:
Using IPv6 address formats with Dom
Page 47 and 48:
v If connecting or listening with a
Page 49 and 50:
Example 7 -- Microsoft Windows/Linu
Page 51 and 52:
Partitioned servers and IP addresse
Page 53 and 54:
Where serverportname is the name of
Page 55 and 56:
v For NetBIOS over TCP/IP, the syst
Page 57 and 58:
1. From the Domino Administrator or
Page 59 and 60:
Field Action Notes Network Enter th
Page 61 and 62:
destination server, the server obta
Page 63 and 64:
Setting up a secondary name server
Page 65 and 66:
Where TCPIPportname is the port nam
Page 67 and 68:
1. Add one entry in the local host
Page 69 and 70:
Note: Because Internet protocols ca
Page 71 and 72:
Confirming that TCP/IP is configure
Page 73 and 74:
v Associate each Notes network port
Page 75 and 76:
Chapter 3. Installing and Setting U
Page 77 and 78:
v Before running any Domino setup c
Page 79 and 80:
Concurrent I/O and Direct I/O not s
Page 81 and 82:
v Creates the Reports file, names i
Page 83 and 84:
For more information on Internet Si
Page 85 and 86:
6. Click ″Save & Close.″ 7. Rep
Page 87 and 88:
3. Enter the Secrets database filen
Page 89 and 90:
For complete information on working
Page 91 and 92:
By default, server setup is set to
Page 93 and 94:
4. On the client system, choose Sta
Page 95 and 96:
4. Continue through the setup progr
Page 97 and 98:
To use a setup profile from a Windo
Page 99 and 100:
v On a UNIX server, enter server -l
Page 101 and 102:
Create a replica of the Certificati
Page 103 and 104:
Field Action Expiration date (Optio
Page 105 and 106:
Field Action Certifier password Ent
Page 107 and 108:
The Domino server is configured to
Page 109 and 110:
3. Click the Basics tab, and comple
Page 111 and 112:
Field Enter Anonymous (Applies to a
Page 113 and 114:
Note: If the server program is runn
Page 115 and 116:
Chapter 4. Setting Up Server-to-Ser
Page 117 and 118:
For information about connecting se
Page 119 and 120:
can use a combination of topologies
Page 121 and 122:
Example of hub-and-spoke topology I
Page 123 and 124:
Example of mail and directory serve
Page 125 and 126:
A LAN Connection document can also
Page 127 and 128:
To gather information, the requesti
Page 129 and 130:
To connect a Domino server to an In
Page 131 and 132:
2. List the destination servers tha
Page 133 and 134:
Field Description Cause calling Spe
Page 135 and 136:
After you set up a hunt group, crea
Page 137 and 138:
Modem command files, which have the
Page 139 and 140:
To create a Network dialup connecti
Page 141 and 142:
5. Choose File - Document Propertie
Page 143 and 144:
Tab Field Description Replication/R
Page 145 and 146:
Tab Field Description Connect at ti
Page 147 and 148:
Field Description Port number Speci
Page 149 and 150:
DESC A one line description of the
Page 151 and 152:
Type of client and connection to Do
Page 153 and 154:
Chapter 5. Setting up Domino and DB
Page 155 and 156:
The DAV makes the data available di
Page 157 and 158:
v Domino with DB2 supports Domino s
Page 159 and 160:
Task Command to run task Descriptio
Page 161 and 162:
Domino and DB2 supported platforms
Page 163 and 164:
v DB2 UDB Enterprise Server Edition
Page 165 and 166:
Mixed platforms are supported for D
Page 167 and 168:
Domino server enablement and mappin
Page 169 and 170:
You are now ready to create views.
Page 171 and 172:
Note: When you create file systems
Page 173 and 174:
12. Determine whether your DB2 conf
Page 175 and 176:
18. From the Domino Administrator,
Page 177 and 178:
Setting up DB2 on Microsoft Windows
Page 179 and 180:
12. From the AIX OS or from the AIX
Page 181 and 182:
5. Logged in as the Domino user, st
Page 183 and 184:
Performing the DB2 Access server in
Page 185 and 186:
Note: If you are using Microsoft Wi
Page 187 and 188:
Field Action DB2 Node Name This fie
Page 189 and 190:
NOTES.INI setting Description DB2UD
Page 191 and 192:
Mapping the DB2 ID to a Notes ID in
Page 193 and 194:
Example For example, you can create
Page 195 and 196:
v Rename a DB2 class v Create a new
Page 197 and 198:
Procedure - Upgrading when you have
Page 199 and 200:
Upgrading to DB2 8.2.2 if you have
Page 201 and 202:
Copying a local copy of a database
Page 203 and 204:
5. Click Set. 6. (Optional) Select
Page 205 and 206:
2. Choose the server for which you
Page 207 and 208:
Domino Directory on the DB2 Access
Page 209 and 210:
Chapter 6. Setting Up Notes Users a
Page 211 and 212:
Alan Jones works in the Sales depar
Page 213 and 214:
The method you use to register peop
Page 215 and 216:
Field Default Set warning threshold
Page 217 and 218:
Information that does not replicate
Page 219 and 220:
If you create roaming users and do
Page 221 and 222:
Field Enter Mail system Choose one
Page 223 and 224:
Field Enter Location for storing us
Page 225 and 226:
Registering users with the Web Admi
Page 227 and 228:
Field Action Mail System Choose one
Page 229 and 230:
Field Action Mail System Choose one
Page 231 and 232:
11. Click the Address tab, and ente
Page 233 and 234:
Field Action Clean-up options Choos
Page 235 and 236:
Order Parameter Enter 11 Location D
Page 237 and 238:
4. If the server name that is shown
Page 239 and 240:
For information on multi-user insta
Page 241 and 242:
Running a silent install provides u
Page 243 and 244:
1. Invoke the InstallShield Tuner p
Page 245 and 246:
3. Use the InstallShield Tuner (6)
Page 247 and 248:
Using the SETUP.INI file setting to
Page 249 and 250:
Setting Description IM.Port IBM Lot
Page 251 and 252:
For more information about using sc
Page 253 and 254:
v Extract the language pack on a wo
Page 255 and 256:
Delaying the deployment of welcome
Page 257 and 258:
Chapter 7. Managing Notes Users Thi
Page 259 and 260:
Troubleshooting name changes The pu
Page 261 and 262:
New Alternate Name Information Avai
Page 263 and 264:
1. Make sure you have the following
Page 265 and 266:
is never prompted as to whether the
Page 267 and 268:
To verify the change The procedure
Page 269 and 270:
You can also move a user to another
Page 271 and 272:
4. To complete the move, in the Cho
Page 273 and 274:
7. Click Next. A message displays i
Page 275 and 276:
6. If you are working with clustere
Page 277 and 278:
To recertify a user ID Follow these
Page 279 and 280:
3. In the ″Choose a Certifier″
Page 281 and 282:
By default, administrators have Man
Page 283 and 284:
Chapter 8. Setting Up and Managing
Page 285 and 286:
Field Action Mail Domain Enter the
Page 287 and 288:
6. (Optional) Click the Comments ta
Page 289 and 290:
4. Complete these fields: Field Act
Page 291 and 292:
Field Action Members Add or remove
Page 293 and 294:
To find a group name with the Domin
Page 295 and 296:
Chapter 9. Creating Replicas and Sc
Page 297 and 298:
Note: If the server initiating the
Page 299 and 300:
particular privilege for a server e
Page 301 and 302:
Table of replication settings By de
Page 303 and 304:
v Users can’t categorize or edit
Page 305 and 306:
Specifying replication settings for
Page 307 and 308:
7. In the ″Repeat interval of″
Page 309 and 310:
To set up Connection documents for
Page 311 and 312:
You can also specify replication di
Page 313 and 314:
If you do not enable multiple repli
Page 315 and 316:
Each server, network, cluster, and
Page 317 and 318:
Chapter 10. Setting Up Calendars an
Page 319 and 320:
v If the Free Time system finds a N
Page 321 and 322:
The Resource Reservations database
Page 323 and 324:
v Room -- Typically a conference ro
Page 325 and 326:
6. Complete these fields Field Ente
Page 327 and 328:
If you delete a resource from the R
Page 329 and 330:
9. A message appears notifying you
Page 331 and 332:
Field Action Repeat until (Displays
Page 333 and 334:
Chapter 11. Using Policies Using po
Page 335 and 336:
In organizational policies, the hie
Page 337 and 338:
Planning and assigning policies Bef
Page 339 and 340:
1. Make sure that you have Editor a
Page 341 and 342:
v Check the field to create Notes I
Page 343 and 344:
6. On the Dial-up Connections tab,
Page 345 and 346:
Many of the tabs on the desktop pol
Page 347 and 348:
Field Action If running this versio
Page 349 and 350:
Field Enter SSL protocol version Ch
Page 351 and 352:
To create Security settings: 1. Mak
Page 353 and 354:
For more information, see the chapt
Page 355 and 356:
Field Action Earliest Allowable Key
Page 357 and 358:
Field Action Delete/Remove preferen
Page 359 and 360:
Field Action For new meetings, the
Page 361 and 362:
Field Action The following people o
Page 363 and 364:
If you choose not to include archiv
Page 365 and 366:
6. Under Archive locations, choose
Page 367 and 368:
Field Action Use customer-generated
Page 369 and 370:
Creating a policy document When you
Page 371 and 372:
Editing policies Use this procedure
Page 373 and 374:
v In the top right pane, selects on
Page 375 and 376:
v Open the Groups view, select one
Page 377 and 378:
Chapter 12. Setting Up Domain Searc
Page 379 and 380:
Tip: You can use replication events
Page 381 and 382:
10. Make sure the Catalog task is i
Page 383 and 384:
Page 385 and 386:
CAUTION: The security checking work
Page 387 and 388:
By default, the indexing server use
Page 389 and 390:
Manual setup from a Notes workstati
Page 391 and 392:
4. Click Browse Catalog. 5. In the
Page 393 and 394:
Chapter 13. Setting Up Domino Off-L
Page 395 and 396:
Name of Field Action Interval Speci
Page 397 and 398:
Syc Options Halt Conditions v Limit
Page 399 and 400:
Name of field Action Network Settin
Page 401 and 402:
If the application is DOLS-enabled,
Page 403 and 404:
When the user wants to open the app
Page 405 and 406:
6. Fill out the following fields in
Page 407 and 408:
Option Description Tighten security
Page 409 and 410:
Viewing DOLS download information T
Page 411 and 412:
SELECT From=@UserName|Form="DOLSOff
Page 413 and 414:
Chapter 14. Planning the Service Pr
Page 415 and 416:
For more information on setting up
Page 417 and 418:
Combination of IP address configura
Page 419 and 420:
Combined configuration You can use
Page 421 and 422:
Name Protocol The domain portion of
Page 423 and 424:
1. Reads the topic ″Installing th
Page 425 and 426:
Chapter 15. Setting Up the Service
Page 427 and 428:
To meet the requirements for creati
Page 429 and 430:
Where to store data for hosted orga
Page 431 and 432:
7. Complete these fields on the ID
Page 433 and 434:
For more information on extended AC
Page 435 and 436:
3. Chooses Tools - Hosted Organizat
Page 437 and 438:
For more information on Internet Si
Page 439 and 440:
Field Action Log checkpoint at midn
Page 441 and 442:
Chapter 16. Managing a Hosted Envir
Page 443 and 444:
The Domino service provider softwar
Page 445 and 446:
Moving a hosted organization that h
Page 447 and 448:
For more information on the Interne
Page 449 and 450:
v Add the hosted organization admin
Page 451 and 452:
Chapter 17. Setting Up the Administ
Page 453 and 454:
v Using a multifunction server as t
Page 455 and 456:
Administration Process support of s
Page 457 and 458:
Creating a Cross-domain Configurati
Page 459 and 460:
Task Administrator needs this acces
Page 461 and 462:
Task Rename users and convert users
Page 463 and 464:
New Processing Option Description R
Page 465 and 466:
Adminstration Request Documents: Ic
Page 467 and 468:
Using Selective Replication formula
Page 469 and 470:
Forcing an administration process r
Page 471 and 472:
Field Enter Store Admin Process log
Page 473 and 474:
Setting up an extended administrati
Page 475 and 476:
Message Occurs during Corrective ac
Page 477 and 478:
Message Occurs during Corrective ac
Page 479 and 480:
Chapter 18. Setting Up and Using Do
Page 481 and 482:
To update a server list The first t
Page 483 and 484:
4. Click the up or down arrows to c
Page 485 and 486:
Field Action Advanced Options Click
Page 487 and 488:
If you change the foreground or bac
Page 489 and 490:
Domino Administrator tools Most tab
Page 491 and 492:
Access control list: Default name A
Page 493 and 494:
Role Tab ServerAnalysis Server - An
Page 495 and 496:
about creating and modifying groups
Page 497 and 498:
Starting and stopping the Server Co
Page 499 and 500:
Chapter 19. Using Domino with Windo
Page 501 and 502:
Field Action User/group registratio
Page 503 and 504:
Field Action Registration Options C
Page 505 and 506:
hierarchy of organizational units a
Page 507 and 508:
Fields Action First name, Middle na
Page 509 and 510:
4. Choose one of these options: Fie
Page 511 and 512:
document for that Domino Directory
Page 513 and 514:
Chapter 20. Planning Directory Serv
Page 515 and 516:
v Should you use an extended ACL to
Page 517 and 518:
Planning new entries in the Domino
Page 519 and 520:
type-ahead addressing does not sear
Page 521 and 522:
Comparison of directory catalogs an
Page 523 and 524:
3. The primary Domino Directory on
Page 525 and 526:
Condensed Directory Catalog A direc
Page 527 and 528:
Chapter 21. Setting Up the Domino D
Page 529 and 530:
You can set up a Domino Directory a
Page 531 and 532:
A server that stores a Configuratio
Page 533 and 534:
You might want to customize the dat
Page 535 and 536:
You can assign a user to up to six
Page 537 and 538:
5. Complete any of these fields, an
Page 539 and 540:
Chapter 22. Setting Up the LDAP Ser
Page 541 and 542:
For example, if the distinguished n
Page 543 and 544:
Note: A server that runs the LDAP s
Page 545 and 546:
Setting Description For more inform
Page 547 and 548:
Field Enter Authentication options:
Page 549 and 550:
directory tree, but allow access to
Page 551 and 552:
To convert the default anonymous se
Page 553 and 554:
enable directory changes to be made
Page 555 and 556:
Examples of the ″Rules to follow.
Page 557 and 558:
Configuring the LDAP service to all
Page 559 and 560:
v If you see the prompt ″Unable t
Page 561 and 562:
xxx represents the text string to s
Page 563 and 564:
Statistic Description Sessions.Inbo
Page 565 and 566:
Chapter 23. Managing the LDAP Schem
Page 567 and 568:
How an LDAP attribute relates to a
Page 569 and 570:
Note: If the schema daemon finds th
Page 571 and 572:
For information about the fields in
Page 573 and 574:
A registered OID prefix begins with
Page 575 and 576:
Using the Schema database to add a
Page 577 and 578:
Extended Directory Catalog for whic
Page 579 and 580:
Chapter 24. Using the ldapsearch Ut
Page 581 and 582:
Using search filters with ldapsearc
Page 583 and 584:
Search Command Search the host ldap
Page 585 and 586:
Chapter 25. Setting Up Directory As
Page 587 and 588:
Note: A server’s primary Domino D
Page 589 and 590:
The following figure illustrates lo
Page 591 and 592:
For more information on creating ac
Page 593 and 594:
v A null character (nothing or a si
Page 595 and 596:
How naming rules relate to director
Page 597 and 598:
Directory assistance and failover f
Page 599 and 600:
5. To trust all the directories agg
Page 601 and 602:
Using directory assistance to contr
Page 603 and 604:
. Enter the name of the server on w
Page 605 and 606:
Field Enter Domain name The name of
Page 607 and 608:
Field Enter Replica# The server nam
Page 609 and 610:
Field Enter Attribute to be used as
Page 611 and 612:
Field Enter Dereference alias on se
Page 613 and 614:
Specifying a name and password for
Page 615 and 616:
To define custom search filters, yo
Page 617 and 618:
Once you have set up this feature,
Page 619 and 620:
Change Detection Mechanism Tested P
Page 621 and 622:
Basics tab Contents Comments Group
Page 623 and 624:
Basics tab Contents Comments Option
Page 625 and 626:
Chapter 26. Setting Up Directory Ca
Page 627 and 628:
v Users can flag mail for encryptio
Page 629 and 630:
a name hierarchy, and so forth. An
Page 631 and 632:
Assistance document for each Extend
Page 633 and 634:
Directory catalogs and Notes mail e
Page 635 and 636:
Types of documents the Dircat task
Page 637 and 638:
All groups aggregated as Multi-purp
Page 639 and 640:
v In a condensed Directory Catalog,
Page 641 and 642:
You can set up a server to use more
Page 643 and 644:
Setting the view sort order Unlike
Page 645 and 646:
Setting up Notes clients to use mor
Page 647 and 648:
2. Next to Server, select the Dirca
Page 649 and 650:
Note: See the topic ″Planning iss
Page 651 and 652:
Document/Database Field(s)/Tab(s) P
Page 653 and 654:
For information, see the topic ″E
Page 655 and 656:
Or you can do a full rebuild by cli
Page 657 and 658:
Chapter 27. Setting Up Extended ACL
Page 659 and 660:
v To delete a document, a Notes or
Page 661 and 662:
Note: The Administer access setting
Page 663 and 664:
Examples of precedence rules: Subje
Page 665 and 666:
Anonymous as subject As in the data
Page 667 and 668:
field called FullName, ListName, or
Page 669 and 670:
Example of using ″This container
Page 671 and 672:
Extended ACL: example 2 The Acme co
Page 673 and 674:
v Use names that represent groups o
Page 675 and 676:
v Click Add - Default to add the su
Page 677 and 678:
8. The Modified Forms section shows
Page 679 and 680:
Chapter 28. Overview of the Domino
Page 681 and 682:
POP3 and IMAP clients, which always
Page 683 and 684:
How mail routes in a Domino system
Page 685 and 686:
To help manage disk space, you can
Page 687 and 688:
Working with other mail systems in
Page 689 and 690:
Documents Description Adjacent and
Page 691 and 692:
Connection documents for mail routi
Page 693 and 694:
servers in the same Notes named net
Page 695 and 696:
mail1.acme.com or mail2.acme.com. I
Page 697 and 698:
Chapter 29. Setting Up Mail Routing
Page 699 and 700:
4. Click Yes when prompted to confi
Page 701 and 702:
Example of using one server for all
Page 703 and 704:
Example of using two servers to bal
Page 705 and 706:
If a user sends a MIME message to a
Page 707 and 708:
and have smarthost.acme.com listed
Page 709 and 710:
Configuration document or an All Se
Page 711 and 712:
In small Domino networks, you can m
Page 713 and 714:
Adjacent Domain documents do not pr
Page 715 and 716:
v Restricts mail from other domains
Page 717 and 718:
Restrictions that you set on this F
Page 719 and 720:
can set up a single relay host that
Page 721 and 722:
2. Choose Connections and click Add
Page 723 and 724:
1. Make sure that you prepared your
Page 725 and 726:
v Enable Domino to accept mail for
Page 727 and 728:
To create a Global Domain document:
Page 729 and 730:
6. Complete these fields, and then
Page 731 and 732:
6. Complete the following and click
Page 733 and 734:
To ensure that every user has a sta
Page 735 and 736:
can split external SMTP mail routin
Page 737 and 738:
For more information about Notes Di
Page 739 and 740:
7. For outbound SMTP connections, c
Page 741 and 742:
Chapter 30. Customizing the Domino
Page 743 and 744:
naming convention used when multipl
Page 745 and 746:
6. Complete this field in the Misce
Page 747 and 748:
set a warning threshold of 25MB on
Page 749 and 750:
Method for enforcing quotas Descrip
Page 751 and 752:
ased on usage, rather than file siz
Page 753 and 754:
Setting server mail rules You can c
Page 755 and 756:
Condition component Description Mes
Page 757 and 758:
How mail rules handle encrypted mes
Page 759 and 760:
Priority level Default Notes routin
Page 761 and 762:
1. From the Domino Administrator, c
Page 763 and 764:
Named Network (NNN). When using Not
Page 765 and 766:
6. Complete these fields in the Adv
Page 767 and 768:
You can use the following tools to
Page 769 and 770:
3. Click Configurations. 4. Select
Page 771 and 772:
Customizing Notes routing To custom
Page 773 and 774:
Changing the routing cost for a con
Page 775 and 776:
Field Enter Deny mail from domains
Page 777 and 778:
To determine whether the use of Int
Page 779 and 780:
Field Enter Enforce server access s
Page 781 and 782:
For information about enabling supp
Page 783 and 784:
have to enable the SSL port. If the
Page 785 and 786:
6. Complete these fields in the Inb
Page 787 and 788:
commonly referred to as electronic
Page 789 and 790:
Inbound Relay Controls Deny message
Page 791 and 792:
elay host or firewall to receive In
Page 793 and 794:
5. If the relay controls still appl
Page 795 and 796:
variable SMTPExpandDNSBLStats in th
Page 797 and 798:
Field Action Desired action when a
Page 799 and 800:
Whitelists can be used independentl
Page 801 and 802:
Inbound Sender Controls Deny messag
Page 803 and 804:
Field Description Allow messages in
Page 805 and 806:
Field Enter SSL negotiated over TCP
Page 807 and 808:
Outbound Sender Controls Deny messa
Page 809 and 810:
1. Make sure you already have a Con
Page 811 and 812:
disclaimers with combinations of ma
Page 813 and 814:
You can use Domino mail journaling
Page 815 and 816:
The change takes effect after the n
Page 817 and 818:
Size management method Description
Page 819 and 820:
You can specify settings for the fo
Page 821 and 822:
For a list of character set groups
Page 823 and 824:
Configuring how Domino converts out
Page 825 and 826:
Field Description Message Content S
Page 827 and 828:
7. Complete the following fields an
Page 829 and 830:
Field Choose Body - Encoding The en
Page 831 and 832:
To set advanced outbound MIME optio
Page 833 and 834:
For information on how to reload th
Page 835 and 836:
By default, the File Identification
Page 837 and 838:
Chapter 31. Setting Up Shared Mail
Page 839 and 840:
How Domino maintains the security o
Page 841 and 842:
Field name Enter Availability Speci
Page 843 and 844:
v Restore a shared mail database v
Page 845 and 846:
Note: The Domino Administrator main
Page 847 and 848:
To determine which mail files use s
Page 849 and 850:
Use these steps on each cluster mem
Page 851 and 852:
Note: Before you unlink a shared ma
Page 853 and 854:
Chapter 32. Setting Up the POP3 Ser
Page 855 and 856:
If the server uses Internet Site do
Page 857 and 858:
For more information on using the D
Page 859 and 860:
5. After Domino creates and opens t
Page 861 and 862:
Chapter 33. Setting Up the IMAP Ser
Page 863 and 864:
Note: The Domino Release 6, and mor
Page 865 and 866:
For information on configuring an I
Page 867 and 868:
3. Click Configurations. 4. Select
Page 869 and 870:
In addition to the personal namespa
Page 871 and 872:
5. Select the Configuration Setting
Page 873 and 874:
The session thread communicates dir
Page 875 and 876:
Field Enter Default IMAP SSL redire
Page 877 and 878:
Field Enter When receiving unencryp
Page 879 and 880:
1. From the Domino Administrator, o
Page 881 and 882:
This prevents Domino from routing m
Page 883 and 884:
adding RFC 822 phrases to users’
Page 885 and 886:
Field Description Incoming mail (IM
Page 887 and 888:
Chapter 34. Setting Up Domino Web A
Page 889 and 890:
Creating Portal URLs A portal is a
Page 891 and 892:
Page 893 and 894:
6. Save the document and restart th
Page 895 and 896:
Setting Action Directory type used
Page 897 and 898:
Setting Action Default cache scrubb
Page 899 and 900:
Browser Cache Management, this pref
Page 901 and 902:
4. Change the Target Form to DWALog
Page 903 and 904:
For example, to compress all text:
Page 905 and 906:
mail database. For users who access
Page 907 and 908:
v An alternative method is to use t
Page 909 and 910:
Part 1 -- Configure Microsoft Outlo
Page 911 and 912:
Chapter 35. Monitoring Mail This ch
Page 913 and 914:
To create the Reports database 1. F
Page 915 and 916:
MTC operation Description and Comma
Page 917 and 918:
Field Enter Sent Choose one: v Toda
Page 919 and 920:
Field Description Run this report S
Page 921 and 922:
You can open the Reports database (
Page 923 and 924:
Chapter 36. Setting Up the Domino W
Page 925 and 926:
Setting up a Domino server as a Web
Page 927 and 928:
3. (Optional) Click Internet Protoc
Page 929 and 930:
Example configuration Settings Comm
Page 931 and 932:
Field Action Port number Indicate t
Page 933 and 934:
There are some restrictions when us
Page 935 and 936:
Hosting Web sites using Web Server
Page 937 and 938:
Field Action Java URL path Enter th
Page 939 and 940:
To specify GIF conversion: Field En
Page 941 and 942:
For information on the Redirect URL
Page 943 and 944:
Field Enter Meta character set Choo
Page 945 and 946:
Character set group Mapping choices
Page 947 and 948:
The most important use of response
Page 949 and 950:
Field Action Custom header (HTTP Re
Page 951 and 952:
File protection documents provide l
Page 953 and 954:
If there is no realm specification
Page 955 and 956:
authentication, see the chapter ″
Page 957 and 958:
Improving Web server performance Af
Page 959 and 960:
Field Action Maximum requests per p
Page 961 and 962:
Chapter 37. Setting Up Domino to Wo
Page 963 and 964:
To install the WebSphere plug-in on
Page 965 and 966:
Setting up security for Microsoft I
Page 967 and 968:
v If you want to match the Windows
Page 969 and 970:
Chapter 38. Setting Up the Web Navi
Page 971 and 972:
Field Enter No proxy for these host
Page 973 and 974:
2. Click the Server Tasks - Web Ret
Page 975 and 976:
Agents The Web Navigator database c
Page 977 and 978:
Field Enter Font for text in the ,
Page 979 and 980:
4. Click Schedule and then specify
Page 981 and 982:
Using the Averaging agent to calcul
Page 983 and 984:
Chapter 39. Planning Security This
Page 985 and 986:
Plan and deliver employee training
Page 987 and 988:
For more information on securing de
Page 989 and 990:
For more information on setting up
Page 991 and 992:
Task Use Authenticate Web clients f
Page 993 and 994:
For more information on Smartcards,
Page 995 and 996:
Using both types of Domino Internet
Page 997 and 998:
Chapter 40. Controlling Access to D
Page 999 and 1000:
3. In the Server Access section, co
Page 1001 and 1002:
You do not need to list a user indi
Page 1003 and 1004:
v Manager access, with all access p
Page 1005 and 1006:
v Log key mismatches for all Notes
Page 1007 and 1008:
Controlling the use of headline mon
Page 1009 and 1010:
Field Action Cause calling Enter an
Page 1011 and 1012:
Field Action Run restricted Java/Ja
Page 1013 and 1014:
1. On the Domino server workstation
Page 1015 and 1016:
Chapter 41. Protecting and Managing
Page 1017 and 1018:
For more information on using Inter
Page 1019 and 1020:
CAUTION: In order for Notes users t
Page 1021 and 1022:
Each time a user changes a password
Page 1023 and 1024:
To lock out an individual user’s
Page 1025 and 1026:
v Administrators export recovery in
Page 1027 and 1028:
v If you are not using a server-bas
Page 1029 and 1030:
Use the Notes.ini variable ID_Recov
Page 1031 and 1032:
Note: This is done in addition to t
Page 1033 and 1034:
Adding a Notes public key to the Do
Page 1035 and 1036:
Note: The archived keys remain in t
Page 1037 and 1038:
Adding cross-certificates to the Do
Page 1039 and 1040:
Your local Domino Directory does no
Page 1041 and 1042:
3. Select whether to use a CA-enabl
Page 1043 and 1044:
Displaying cross-certificates To vi
Page 1045 and 1046:
Chapter 42. Controlling User Access
Page 1047 and 1048:
Types of ACL entries Wildcard entri
Page 1049 and 1050:
For more information about alternat
Page 1051 and 1052:
Anonymous not listed in database AC
Page 1053 and 1054:
10. (Optional) Enforce a consistent
Page 1055 and 1056:
To view ACL entries by access level
Page 1057 and 1058:
Page 1059 and 1060:
Roles list box on the Basics panel
Page 1061 and 1062:
Setting up the Administration Proce
Page 1063 and 1064:
Using the ACL log You can display a
Page 1065 and 1066:
The set of URLs that gets restricte
Page 1067 and 1068:
Chapter 43. Protecting User Worksta
Page 1069 and 1070:
Access option If enabled, allows fo
Page 1071 and 1072:
with default settings that are code
Page 1073 and 1074:
For more information, see the topic
Page 1075 and 1076:
as an entry in the Admin ECL. You t
Page 1077 and 1078:
Chapter 44. Setting Up Name-and-Pas
Page 1079 and 1080:
v If you set up SSL on the server a
Page 1081 and 1082:
owswer, and the browser sends the c
Page 1083 and 1084:
1. In the Domino Directory, create
Page 1085 and 1086:
6. Enter the name of the custom log
Page 1087 and 1088:
Example Description alan_jones@acme
Page 1089 and 1090:
then the custom password policy wil
Page 1091 and 1092:
Be sure that your client location d
Page 1093 and 1094:
c. Enter the password (specified wh
Page 1095 and 1096:
4. In the Web SSO Configuration fie
Page 1097 and 1098:
v Any appropriate LDAP attribute, a
Page 1099 and 1100:
Validation and authentication for I
Page 1101 and 1102:
Chapter 45. Encryption and Electron
Page 1103 and 1104:
shouldn’t create only North Ameri
Page 1105 and 1106:
v The user selects ″MIME format
Page 1107 and 1108:
4. Notes or the mail application co
Page 1109 and 1110:
Chapter 46. Setting Up a Domino Ser
Page 1111 and 1112:
3. Add certifiers to the CA process
Page 1113 and 1114:
3. (Optional) In the Administrators
Page 1115 and 1116:
Option Security level Password requ
Page 1117 and 1118:
Key usage extension Description Dat
Page 1119 and 1120:
Field Action Extended key usages Ch
Page 1121 and 1122:
v Open the Administrator’s mail f
Page 1123 and 1124:
8. The time period in which the Adm
Page 1125 and 1126:
5. Click Save and Close. CAUTION: I
Page 1127 and 1128:
Chapter 47. Setting Up SSL on a Dom
Page 1129 and 1130:
Every server certificate includes a
Page 1131 and 1132:
From a Domino CA using a Web browse
Page 1133 and 1134:
For more information, see the topic
Page 1135 and 1136:
6. Do one of the following: v If yo
Page 1137 and 1138:
Field Enter Client certificate Choo
Page 1139 and 1140:
Changing the password for the serve
Page 1141 and 1142:
v In an Internet Site document. If
Page 1143 and 1144:
Chapter 48. Setting Up Clients for
Page 1145 and 1146:
To obtain a trusted root certificat
Page 1147 and 1148:
5. Check to make sure that the name
Page 1149 and 1150:
Note: The client cannot use the cer
Page 1151 and 1152:
For information on creating cross-c
Page 1153 and 1154:
signatures to the Contact document.
Page 1155 and 1156:
5. Save the document. Tip: If the c
Page 1157 and 1158:
Chapter 49. Rolling Out Databases T
Page 1159 and 1160:
Mandatory tasks Perform these tasks
Page 1161 and 1162:
You can assign ACL settings (includ
Page 1163 and 1164:
3. Choose Tools - Database - Sign.
Page 1165 and 1166:
Chapter 50. Organizing Databases on
Page 1167 and 1168:
7. Click OK. 8. To verify that the
Page 1169 and 1170:
Chapter 51. Setting Up and Managing
Page 1171 and 1172:
Indexing option Description Index a
Page 1173 and 1174:
3. Choose File - Database - Access
Page 1175 and 1176:
Chapter 52. Setting Up Database Lib
Page 1177 and 1178:
5. Choose Edit - Delete. Database c
Page 1179 and 1180:
Chapter 53. Monitoring the Domino S
Page 1181 and 1182:
Monitoring events on the Domino sys
Page 1183 and 1184:
Field Action Trigger the event when
Page 1185 and 1186:
5. Click the Probe tab, and complet
Page 1187 and 1188:
1. Make sure that the ISpy task is
Page 1189 and 1190:
Event handlers An event handler def
Page 1191 and 1192:
Passing event parameters using the
Page 1193 and 1194:
Creating an event handler When you
Page 1195 and 1196:
v By Type 4. Double-click the Event
Page 1197 and 1198:
6. Do one to restart the Domino Adm
Page 1199 and 1200:
Field Action Collection alarm inter
Page 1201 and 1202:
v Fixed -- Statistic values that do
Page 1203 and 1204:
The information in these reports pr
Page 1205 and 1206:
Exporting statistics to a spreadshe
Page 1207 and 1208:
To change the color of a statistic:
Page 1209 and 1210:
Chapter 54. Using the Domino SNMP a
Page 1211 and 1212:
The text message of the Domino even
Page 1213 and 1214:
For additional information, refer t
Page 1215 and 1216:
There are several different ways to
Page 1217 and 1218:
Note: The Domino SNMP Agent is set
Page 1219 and 1220:
If you are not using the NET-SNMP M
Page 1221 and 1222:
The pw.src should resemble the foll
Page 1223 and 1224:
Manually starting and stopping the
Page 1225 and 1226:
Creating and Configuring your own N
Page 1227 and 1228:
ovstart Removing traps To remove th
Page 1229 and 1230:
Chapter 55. Using Server Health Mon
Page 1231 and 1232:
Statistic Rating Explanation Health
Page 1233 and 1234:
Selecting server components to incl
Page 1235 and 1236:
To display a current health report:
Page 1237 and 1238:
However, the Server Health Monitor
Page 1239 and 1240:
Chapter 56. Monitoring Domino Domai
Page 1241 and 1242:
v Replication probes v Security pro
Page 1243 and 1244:
Page 1245 and 1246:
Field Action Severity Choose the se
Page 1247 and 1248:
Directory Probe name Description Di
Page 1249 and 1250:
Field Action Should this probe run
Page 1251 and 1252:
Field Action Timeout for open attem
Page 1253 and 1254:
the probe runs on Server A (origina
Page 1255 and 1256:
Field Action Should this probe run
Page 1257 and 1258:
Field Action Which servers should r
Page 1259 and 1260:
Server probes There is one server p
Page 1261 and 1262:
Field Action Probe Description Type
Page 1263 and 1264:
Deleting a DDM Probe document When
Page 1265 and 1266:
Example of a DDM server collection
Page 1267 and 1268:
Adding subordinate servers to the D
Page 1269 and 1270:
The first time that an event is log
Page 1271 and 1272:
Changing the state of an event in D
Page 1273 and 1274:
administrator names that displays i
Page 1275 and 1276:
Chapter 57. Transaction Logging and
Page 1277 and 1278:
If the database is not yet complete
Page 1279 and 1280:
Field Action Logging style** Choose
Page 1281 and 1282:
Fault recovery You can set up fault
Page 1283 and 1284:
7. Click Create. Collecting diagnos
Page 1285 and 1286:
Field Action Maximum size of NSD ou
Page 1287 and 1288:
NOTES.INI setting MAX_NSDINFO_FILES
Page 1289 and 1290:
Chapter 58. Using Log Files This ch
Page 1291 and 1292:
View Contains information about Rep
Page 1293 and 1294:
Analyzing Domino log files using an
Page 1295 and 1296:
When you log to a text file, the fo
Page 1297 and 1298:
Field Enter Referer log The prefix
Page 1299 and 1300:
Chapter 59. Setting Up Activity Log
Page 1301 and 1302:
as a result of the request, the amo
Page 1303 and 1304:
v Open records, which log when a se
Page 1305 and 1306:
If a session ends before authentica
Page 1307 and 1308:
1. From the Domino Administrator, o
Page 1309 and 1310:
Chapter 60. Maintaining Databases T
Page 1311 and 1312:
v Quota v Warning v Created v Last
Page 1313 and 1314:
For more information on the Databas
Page 1315 and 1316:
For information on designing forms
Page 1317 and 1318:
Tip: To track usage over a period o
Page 1319 and 1320:
Indexer tasks: Update and Updall Th
Page 1321 and 1322:
Updall: Updall is similar to Update
Page 1323 and 1324:
Updall - Rebuild options: Option in
Page 1325 and 1326:
Shortcut Description When to use SH
Page 1327 and 1328:
Note: When views are being rebuilt
Page 1329 and 1330:
v Run Fixup using a console command
Page 1331 and 1332:
4. Enter the following command in o
Page 1333 and 1334:
5. From the Domino Administrator, i
Page 1335 and 1336:
6. In the Tools pane on the right,
Page 1337 and 1338:
Running a database analysis 1. From
Page 1339 and 1340:
Chapter 61. Maintaining Domino Serv
Page 1341 and 1342:
For more information on policy sett
Page 1343 and 1344:
Each item is represented by a docum
Page 1345 and 1346:
Database comparison Explanation Rep
Page 1347 and 1348:
v Skip -- if you are recertifying m
Page 1349 and 1350:
Chapter 62. Using Activity Trends T
Page 1351 and 1352:
Field Action Days of the week to co
Page 1353 and 1354:
Page 1355 and 1356:
3. Select the statistic you want to
Page 1357 and 1358:
Page 1359 and 1360:
5. Complete these fields to specify
Page 1361 and 1362:
server, 10 databases may account fo
Page 1363 and 1364:
v Change the layout of the Activity
Page 1365 and 1366:
v Light -- The light bin is the top
Page 1367 and 1368:
Field Action Type Choose one: Role
Page 1369 and 1370:
5. The field ″Submit to″ displa
Page 1371 and 1372:
Option Action reset Resets the inte
Page 1373 and 1374:
The workflow for processing a plan
Page 1375 and 1376:
To view database moves in the resou
Page 1377 and 1378:
Field Action Category (Optional) Se
Page 1379 and 1380:
5. On the Basics tab, complete thes
Page 1381 and 1382:
Chapter 63. Improving Server Perfor
Page 1383 and 1384:
v Use multiple I/O controllers to d
Page 1385 and 1386:
Default is 30 minutes. A longer int
Page 1387 and 1388:
For more information on database pe
Page 1389 and 1390:
Improving Windows 2000 server perfo
Page 1391 and 1392:
Chapter 64. Improving Database Perf
Page 1393 and 1394:
If you select or deselect the ″Do
Page 1395 and 1396:
v The database contains many docume
Page 1397 and 1398:
Database cache size By default, the
Page 1399 and 1400:
v Use replication settings to limit
Page 1401 and 1402:
If you have specified a value for t
Page 1403 and 1404:
Compact - Style Option Command-line
Page 1405 and 1406:
Running Compact using a console com
Page 1407 and 1408:
Deleting inactive documents Regular
Page 1409 and 1410:
6. (Optional) To archive deleted do
Page 1411 and 1412:
Chapter 65. Using Server.Load This
Page 1413 and 1414:
Statistic Description Database.NIFP
Page 1415 and 1416:
Messaging Statistic Description Tot
Page 1417 and 1418:
To see the actual code of each scri
Page 1419 and 1420:
2. Set the Thread Creation Interval
Page 1421 and 1422:
3. Choose File - Save Settings. 4.
Page 1423 and 1424:
Running the test: 1. Start Server.L
Page 1425 and 1426:
7. In the ″Build Recipient List u
Page 1427 and 1428:
Variable Action IMAPHost Enter the
Page 1429 and 1430:
v System under test (SUT) Test Init
Page 1431 and 1432:
3. At the end of the test, Issue a
Page 1433 and 1434:
Setting Use this value Number of Ma
Page 1435 and 1436:
Access rights: The user that you de
Page 1437 and 1438:
Initial or subsequent disk requirem
Page 1439 and 1440:
v Log_MailRouting. Set to 20 for mi
Page 1441 and 1442:
5. Click the Script Variables tab,
Page 1443 and 1444:
11. Click Start Test. Idle workload
Page 1445 and 1446:
To read the code in the test script
Page 1447 and 1448:
Initial or subsequent disk requirem
Page 1449 and 1450:
script loop count = 1 Note: This se
Page 1451 and 1452:
Chapter 66. Troubleshooting Even wi
Page 1453 and 1454:
Required information Your system Op
Page 1455 and 1456:
Insufficient memory - Admin’s req
Page 1457 and 1458:
The following two statistics record
Page 1459 and 1460:
1. If the agent runs to completion
Page 1461 and 1462:
The Cluster Database Directory incl
Page 1463 and 1464:
Server backup is occurring during w
Page 1465 and 1466:
6. Paste or enter the Note ID or UN
Page 1467 and 1468:
v db2 => Import from F:\TEST\NSFOBJ
Page 1469 and 1470:
Resolving the problem: Complete the
Page 1471 and 1472:
table "DWA1.NSFOBJNAM" from having
Page 1473 and 1474:
For instructions on creating the se
Page 1475 and 1476:
Directories -- Troubleshooting Thes
Page 1477 and 1478:
″Directory assistance could not a
Page 1479 and 1480:
2. If you are trusting all the aggr
Page 1481 and 1482:
must also allow anonymous read acce
Page 1483 and 1484:
The Target box doesn’t show docum
Page 1485 and 1486:
Page 1487 and 1488:
1. Check the replication history of
Page 1489 and 1490:
6. Check for problems with modem co
Page 1491 and 1492:
18. Refresh the view so that all of
Page 1493 and 1494:
3. Make sure the communication port
Page 1495 and 1496:
(Platform.System.PctCombinedCpuUtil
Page 1497 and 1498:
Even if you can use the ping utilit
Page 1499 and 1500:
For more information about setting
Page 1501 and 1502:
v Edit the Port_MaxSessions setting
Page 1503 and 1504:
For Notes and Domino to work proper
Page 1505 and 1506:
After you finish checking name reso
Page 1507 and 1508:
Note: When setting the NOTES.INI va
Page 1509 and 1510:
Replication history: The replicatio
Page 1511 and 1512:
3. Check the log file for a ″Repl
Page 1513 and 1514:
Somebody modified the access contro
Page 1515 and 1516:
CA process takes a long time to mak
Page 1517 and 1518:
2. Make sure the Server document is
Page 1519 and 1520:
v System level patches v Server har
Page 1521 and 1522:
Code Meaning Cause 0 Divide error T
Page 1523 and 1524:
v Debug_Smart_Upgrade -- Use this v
Page 1525 and 1526:
Users are prompted multiple times f
Page 1527 and 1528:
Domino server name IP Host name IP
Page 1529 and 1530:
procedures, back up files directly
Page 1531 and 1532:
Appendix A Server Commands You can
Page 1533 and 1534:
Description: Sends a message to spe
Page 1535 and 1536:
Description: Displays a list of ser
Page 1537 and 1538:
To check the status of the Replicat
Page 1539 and 1540:
To optimize resources Domino only r
Page 1541 and 1542:
Route Marketing\Acme -- Sends mail
Page 1543 and 1544:
v To clear a password, select ″Cl
Page 1545 and 1546:
Description: Displays the current v
Page 1547 and 1548:
Description: The Show Memory server
Page 1549 and 1550:
Description: Shows single copy obje
Page 1551 and 1552:
server console to display statistic
Page 1553 and 1554:
Description: Displays a list of all
Page 1555 and 1556:
Start Port Syntax: Start Port portn
Page 1557 and 1558:
v Agent Manager v Certificate Autho
Page 1559 and 1560:
Command Result Tell Amgr Schedule S
Page 1561 and 1562:
Command Result Tell Clrepl Quit Sto
Page 1563 and 1564:
Command Result Tell Router Compact
Page 1565 and 1566:
Command Result Tell HTTP Refresh Re
Page 1567 and 1568:
Arguments Set -- Sets DB2 access fo
Page 1569 and 1570:
GROUP GROUP SIZE STATUS PATH NSF SI
Page 1571 and 1572:
The Domino server’s DB2 purge tas
Page 1573 and 1574:
Controller command Description Disa
Page 1575 and 1576:
Adding commands to the Commands men
Page 1577 and 1578:
Switch Result -f Lets you enter the
Page 1579 and 1580:
Appendix B Server Tasks This chapte
Page 1581 and 1582:
Task Command to run task Descriptio
Page 1583 and 1584:
Appendix C NOTES.INI Settings Appen
Page 1585 and 1586:
asterisk represents everyone listed
Page 1587 and 1588:
Description: By default, a mail-tri
Page 1589 and 1590:
UI equivalent: None, although you c
Page 1591 and 1592:
UI equivalent: None, although you c
Page 1593 and 1594:
Applies to: Servers Default: None,
Page 1595 and 1596:
This setting can be changed at any
Page 1597 and 1598:
Applies to: Server Default: None UI
Page 1599 and 1600:
DB2UDFPath Syntax: DB2Path=pathname
Page 1601 and 1602:
Applies to: Servers Default: None U
Page 1603 and 1604:
sets the lifetime of indexes to 60
Page 1605 and 1606:
Default: The default value is 10 mi
Page 1607 and 1608:
0 - Show Errors & Warnings only 1 -
Page 1609 and 1610:
UI equivalent: None DisabledPorts S
Page 1611 and 1612:
Description: If the Domino Web serv
Page 1613 and 1614:
Description: If this variable is se
Page 1615 and 1616:
is observed in the United States.)
Page 1617 and 1618:
1 - Always empty the Trash folder b
Page 1619 and 1620:
FaultRecoveryFromINI Syntax: FaultR
Page 1621 and 1622:
Applies to: Workstations Default: N
Page 1623 and 1624:
Description: (Domino 7 only) Use th
Page 1625 and 1626:
Description: Prior to Domino 7, if
Page 1627 and 1628:
IMAPDisableMsgCache Syntax: IMAPDis
Page 1629 and 1630:
Description: Use this variable when
Page 1631 and 1632:
iNotes_WA_DisableBothFormats Syntax
Page 1633 and 1634: UI equivalent: none iNotes_WA_Logou
Page 1635 and 1636: iNotes_WA_NamePickerSearchAccentIns
Page 1637 and 1638: FORMS7.nsf. You can use the style r
Page 1639 and 1640: messages sent S/MIME signed or encr
Page 1641 and 1642: Description: Specifies the maximum-
Page 1643 and 1644: KeyFileName Syntax: KeyFileName=pat
Page 1645 and 1646: for the GroupType attribute can be
Page 1647 and 1648: UI equivalent: None LDAPName_Update
Page 1649 and 1650: T:64 E:1: S:64:22 A:4:1 L:N:I:N Aut
Page 1651 and 1652: Log_Replication Syntax: Log_Replica
Page 1653 and 1654: 1 - Log messages when views are reb
Page 1655 and 1656: Default: In the absence of the sett
Page 1657 and 1658: Mail_Skip_NoKey_Dialog Syntax: Mail
Page 1659 and 1660: Applies to: Servers Default: 10 UI
Page 1661 and 1662: UI equivalent: None MTMaxResponses
Page 1663 and 1664: NetWareSocket Syntax: NetWareSocket
Page 1665 and 1666: NoMailMenu Syntax: NoMailMenu=value
Page 1667 and 1668: Description: This variable reflects
Page 1669 and 1670: 5 - Full trace information plus dri
Page 1671 and 1672: Default: None UI equivalent: None P
Page 1673 and 1674: ProgramMode Syntax: ProgramMode=val
Page 1675 and 1676: Description: Use this setting to en
Page 1677 and 1678: Default: 7 UI equivalent: None Sche
Page 1679 and 1680: Schema_Daemon_Resynctime Syntax: Sc
Page 1681 and 1682: Default: 0 UI equivalent: None, alt
Page 1683: ServerNoReplRequests Syntax: Server
Page 1687 and 1688: Description: Identifies the setup d
Page 1689 and 1690: RC2_56 RC2_64 RC2_80 RC2_128 RC5_5
Page 1691 and 1692: Default: In the absence of this set
Page 1693 and 1694: 0 - Entries in the Allow field of t
Page 1695 and 1696: 2 - Require the RFC822 From header
Page 1697 and 1698: TCP_EnableIPV6 Syntax: TCP_EnableIP
Page 1699 and 1700: Applies to: Servers and workstation
Page 1701 and 1702: TransLog_UseAll Syntax: TransLog_Us
Page 1703 and 1704: Updaters Syntax: Updaters=number of
Page 1705 and 1706: Parameter Enter value4 Not currentl
Page 1707 and 1708: Window_Title Syntax: Window_Title=t
Page 1709 and 1710: Appendix D System and Application T
Page 1711 and 1712: Template title and file name Templa
Page 1713 and 1714: Template title and file name Templa
Page 1715 and 1716: Appendix E Customizing the Domino D
Page 1717 and 1718: The only reason to use the Domino D
Page 1719 and 1720: v Create a new LDAP structural obje
Page 1721 and 1722: Note: You can use a backslash (\) i
Page 1723 and 1724: For more information, see the topic
Page 1725 and 1726: 4. Open the $xxxInheritableSchema s
Page 1727 and 1728: To add the auxiliary object class t
Page 1729 and 1730: Upgrading to a new Domino Directory
Page 1731 and 1732: Appendix F Administration Process R
Page 1733 and 1734: Recertify users Register hosted org
Page 1735 and 1736:
Create replica Create a Roaming Use
Page 1737 and 1738:
Update domain catalog configuration
Page 1739 and 1740:
Triggered by: A user initiating an
Page 1741 and 1742:
Result: A new replica of the databa
Page 1743 and 1744:
Carried out on: Server on which the
Page 1745 and 1746:
Carried out: According to the ″In
Page 1747 and 1748:
Result: The Administration Process
Page 1749 and 1750:
Carried out on: The deleted person
Page 1751 and 1752:
Carried out on: The administration
Page 1753 and 1754:
Request Replica Deletion: This requ
Page 1755 and 1756:
Result: Each server in the domain d
Page 1757 and 1758:
For more information on this reques
Page 1759 and 1760:
Result: Creates a replica copy of t
Page 1761 and 1762:
Result: The old mail file is delete
Page 1763 and 1764:
Carried out on: The destination ser
Page 1765 and 1766:
v Source database is full-text inde
Page 1767 and 1768:
moving roaming files are listed her
Page 1769 and 1770:
Page 1771 and 1772:
Page 1773 and 1774:
Carried out on: The administration
Page 1775 and 1776:
For information on renaming a Web u
Page 1777 and 1778:
Carried out on: Each server in the
Page 1779 and 1780:
Carried out: When you approve or re
Page 1781 and 1782:
Carried out on: Each server in the
Page 1783 and 1784:
Result: Updates the password and us
Page 1785 and 1786:
Result: Updates the Certifier docum
Page 1787 and 1788:
Carried out: Immediately Result: Up
Page 1789 and 1790:
Carried out on: On the administrati
Page 1791 and 1792:
Web set Soft Deletion Expire Time T
Page 1793 and 1794:
Carried out: According to the ″De
Page 1795 and 1796:
Result: The Administration Process
Page 1797 and 1798:
Result: Creates the replica on the
Page 1799 and 1800:
Result: The server name is removed
Page 1801 and 1802:
Delete in Reader / Author fields: T
Page 1803 and 1804:
Result: Updates the person’s name
Page 1805 and 1806:
Rename server in Domino Directory:
Page 1807 and 1808:
Check access for non-cluster move r
Page 1809 and 1810:
Appendix G Accessibility and Keyboa
Page 1811 and 1812:
Keyboard shortcuts for databases Yo
Page 1813 and 1814:
Press To do this RIGHT ARROW Move t
Page 1815 and 1816:
Press To do this DELETE Delete sele
Page 1817 and 1818:
Appendix H Server.Load Command Lang
Page 1819 and 1820:
Note: You need to add a value for t
Page 1821 and 1822:
Example 2 Using changeto to create
Page 1823 and 1824:
Drop command Use in a Server.Load s
Page 1825 and 1826:
Syntax If [Value] [Command] Where:
Page 1827 and 1828:
Index command Used in a Server.Load
Page 1829 and 1830:
NEXT_EXPANDED_SELECTED, NEXT_EXPAND
Page 1831 and 1832:
Quit command Used in a Server.Load
Page 1833 and 1834:
Message Body Size Attachment size (
Page 1835 and 1836:
Syntax Web Mail workload usage of W
Page 1837 and 1838:
v If nthiteration = 1, the command
Page 1839 and 1840:
Appendix I Server.Load Scripts This
Page 1841 and 1842:
To issue remote console commands Th
Page 1843 and 1844:
**Pause 10 to 20 seconds** Pause 10
Page 1845 and 1846:
**Reset initial document count by d
Page 1847 and 1848:
Open **Close the view** close EndCr
Page 1849 and 1850:
pause 0 - 180000 **Start the part o
Page 1851 and 1852:
Appendix J Setting Up a Domino 5 Ce
Page 1853 and 1854:
3. Enter the old password, and then
Page 1855 and 1856:
3. Click Dump CA Key Ring to Text.
Page 1857 and 1858:
Appendix K Upgrading Notes Clients
Page 1859 and 1860:
Notes Client Feature Instant Messag
Page 1861 and 1862:
Mail Rules: Formula rewrite to impr
Page 1863 and 1864:
UI Indicator for LotusScript debugg
Page 1865 and 1866:
options for further delay. If the s
Page 1867 and 1868:
Note: Lotus Notes Smart Upgrade fir
Page 1869 and 1870:
In this field Do this Destination v
Page 1871 and 1872:
Running a silent upgrade using opti
Page 1873 and 1874:
A user who is not assigned to the L
Page 1875 and 1876:
Index Special characters $AdminP Vi
Page 1877 and 1878:
Archiving agents for 1388, 1389 dat
Page 1879 and 1880:
Compound document format. See Notes
Page 1881 and 1882:
DDM Probes (continued) scheduling a
Page 1883 and 1884:
Domains (continued) mail routing 69
Page 1885 and 1886:
Error messages (continued) OS/2 150
Page 1887 and 1888:
Host names (continued) specifying i
Page 1889 and 1890:
Internet passwords (continued) user
Page 1891 and 1892:
Loopback addresses creating 413 Lot
Page 1893 and 1894:
Monitoring (continued) performance
Page 1895 and 1896:
Passthru connections activity loggi
Page 1897 and 1898:
R6IMAP Initialization workload sett
Page 1899 and 1900:
Sametime (continued) and scriptable
Page 1901 and 1902:
Server-based certification authorit
Page 1903 and 1904:
SMTPGreeting setting described 1671
Page 1905 and 1906:
Transform files applying 226 for en
Page 1907 and 1908:
Web sites (continued) authenticatio
Page 1909 and 1910:
Licensees of this program who wish
show all

Lotus Domino Administrator 7 Help - Lotus documentation

Create successful ePaper yourself

Delete template?

Save as template?