Super Elastic Alloy Eyeglass Frame Design Using the ANSYS ...

More documents

Recommendations

Info

Analysis Goal • The goal of the analysis is to determine the configurations of the eyeglass frame that can tolerate being stepped on and still be capable of recovery meeting stiffness design requirements. © 2004 ANSYS, Inc. ANSYS, Inc. Proprietary
Analysis Tools © 2004 ANSYS, Inc. • Demonstrate the use of sensitivity analysis at the concept stages of an eyeglass frame design. • Tools used include: – The ANSYS Workbench Environment • Parametric geometry is created using DesignModeler • Boundary conditions, material constants, and meshing controls are defined using the Simulation tool. • Sensitivity studies are run using DesignXplorer – ANSYS’s super-elastic material model ANSYS, Inc. Proprietary
Page 1: Super Elastic Alloy Eyeglass Frame
Page 5 and 6: Design Modeler Parametric Model Dev
Page 7 and 8: Meshing in Workbench • DesignMode
Page 9 and 10: Stress vs. Strain for a Nitinol Mat
Page 11 and 12: Creating Rigid Target Surfaces •
Page 13 and 14: Named Components in Workbench • T
Page 15 and 16: Defining Contact Pairs using APDL
Page 17 and 18: Boundary Conditions • The followi
Page 19 and 20: Initial Solution in the Simulation
Page 21 and 22: Postprocessing the initial simulati
Page 23 and 24: Time History plots using the Postpr
Page 25 and 26: Setting up the Sensitivity study en
Page 27 and 28: Design Explorer DOE - Solution •
Page 29 and 30: Design Explorer DOE - Solution •

Super Elastic Alloy Eyeglass Frame Design Using the ANSYS ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?