UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>UltiMate</strong> <strong>3000</strong> Series:<br />
<strong>SRD</strong>-<strong>3x00</strong> <strong>Solvent</strong> <strong>Racks</strong><br />
When replacing a solvent supply line, remove the filter holder, then the retaining guide,<br />
and then the solvent supply line.<br />
7. Connect the lines to the appropriate connection ports on the degassing module. Route<br />
the solvent supply lines through the opening between the housing and the front panel<br />
door.<br />
Fig. 8: Opening for the solvent supply lines<br />
8. Remove the fitting plugs from the degasser inlet if necessary and connect the solvent<br />
supply line with the associated line label.<br />
A B C A B C<br />
Fig. 9: Example for degasser connections (here <strong>SRD</strong>-3600)<br />
Degasser inlets<br />
(solvent supply line<br />
Degasser outlets<br />
(to pump)<br />
Tubing guides<br />
Tip: The degasser ports in the upper row are combined in pairs with the related<br />
ports in the lower row.<br />
Before connecting the solvent supply lines, make sure that the connectors are free of<br />
contaminants. Even minute particles can allow air to enter the degasser, and thus reduce<br />
the degassing effectiveness.<br />
9. Connect the solvent supply lines from the pump to the degasser (→ page 23).<br />
Page 22 Operating Instructions
Change language