UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
UltiMate 3000 SRD-3x00 Solvent Racks - Dionex
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UltiMate</strong> <strong>3000</strong> Series:<br />
<strong>SRD</strong>-<strong>3x00</strong> <strong>Solvent</strong> <strong>Racks</strong><br />
3. Verify that the module (pump, NCS, or NCP) is connected to Chromeleon (the LED<br />
next to the Connect button is green). If it is not, click Connect.<br />
4. Click More Options and select On or Off under Degasser Mode.<br />
To turn the degasser on or off from the Commands dialog box<br />
1. In Chromeleon, open a control panel for the pump (or the pump module of the NCS or<br />
NCP, respectively) and connect to the timebase in which the pump is installed. (For<br />
details, see the Pump and/or NCS/NCP manuals and the Chromeleon Help.)<br />
2. On the Control menu, select Command.<br />
3. Depending on the pump type, click the plus sign next to PumpModule or Pump to<br />
display the items underneath.<br />
4. Set Degasser to On (or Off) to turn on (or off) the degasser.<br />
To turn the degasser on or off automatically<br />
Fig. 12: Commands dialog box<br />
It is also possible to include the command for turning the degasser on or off in a program file<br />
(PGM) for automated operation of the pump. (For details about program creation, see the<br />
Pump and/or NCS/NCP manuals and the Chromeleon Help.)<br />
5.3.2 Turning the Degasser On or Off (Stand-alone Operation)<br />
If the <strong>SRD</strong> is directly connected to the power source by using the external power supply<br />
unit (→ page 18), the degasser reaches the appropriate operating vacuum after a short time.<br />
When the front panel LEDs are blue/green/green, the degasser is ready for operation.<br />
Page 30 Operating Instructions
Change language