Users Manual - Warranty Life
Users Manual - Warranty Life
Users Manual - Warranty Life
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1 Parts Names and Functions<br />
Reading window<br />
Point this at the bar code<br />
to read.<br />
Trigger switch<br />
Press this to read a bar code.<br />
The following trigger switch operating<br />
modes are available:<br />
• Auto-off mode 1<br />
• Auto-off mode 2<br />
• Momentary switching mode 1<br />
• Momentary switching mode 2<br />
• Continuous reading mode<br />
(The factory default is momentary<br />
switching mode 1.)<br />
In addition, the auto sensing mode is<br />
also available for automatic trigger<br />
operation.<br />
Refer to Chapter 5 for details.<br />
Interface cable<br />
There are two types of<br />
interface cables available.<br />
• RS-232C interface<br />
• PS/2 keyboard interface<br />
1<br />
Indicator LED<br />
This turns blue after a successful read and red if<br />
there is an error.<br />
(Refer to Chapter 9 for details.)<br />
Magic key<br />
This key functions as an auxiliary key for<br />
reads, data transfers, and the like. These<br />
auxiliary functions include:<br />
• Illumination LED switching function<br />
• Data retransfer function<br />
• Specific character transfer function<br />
• Ready/standby switching function<br />
• Auto sensing mode switching function<br />
• Continuous reading mode switching<br />
function<br />
(The factory configuration assigns none<br />
of these functions to this key.)<br />
Refer to Chapter 6 for details.