13.07.2013 Views

Users Manual - Warranty Life

Users Manual - Warranty Life

Users Manual - Warranty Life

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Codabar (NW-7)<br />

Start code Data C/D Stop code<br />

The Codabar symbology may or may not contain a check digit. You can select whether or not to check a check digit<br />

and transmit the check digit read. There are two check digit methods available: modulo arithmetic-16 (MOD-16) and<br />

7-check method.<br />

You can also select whether or not to transmit start/stop codes, as well as selecting either lowercase letters "a/b/c/d" or<br />

uppercase letters "A/B/C/D" for start/stop codes.<br />

Code 32<br />

A Data (8-digit) C/D<br />

You can select whether or not to transmit the leading "A" in Code 32 data to the host and check a check digit.<br />

Six-digit Code 39 data is converted to the 9-digit Code 32 format and then transmitted to the host when all of the<br />

following conditions are satisfied. Other number of digits of Code 39 data is transmitted in the original format without<br />

conversion.<br />

<br />

- "Scanning Code 39" is enabled,<br />

- "Conversion from Code 39 to Code 32 format" is enabled,<br />

- Code 39 data is 6 digits long,<br />

- Code 39 consists of any of "0 to 9" and "alphabets except A, E, I and O," and<br />

- The conversion result is within the range from 0 to 99999999 excluding a check digit.<br />

Code 39<br />

Start code Data C/D Stop code<br />

The Code 39 symbology may or may not contain a check digit. You can select whether or not to check a check digit<br />

and transmit the check digit read.<br />

You can also select whether or not to transmit start/stop codes (which are "*") and enable conversion to Code 39<br />

FULL ASCII or Code 32 format.<br />

Code 93, Code 128, EAN-128<br />

Data<br />

When Code 128 is specified, data in the following format is regarded as an EAN-128 code.<br />

Start code FNC1 Data C/D Stop code<br />

You can select whether to convert an FNC1 (if contained) to GS (1Dh) and transfer or not to transfer an FNC1.<br />

MSI, Plessey<br />

Data C/D<br />

RSS (Note)<br />

Data<br />

(Note) This manual collectively calls RSS-14, RSS-14 Truncated, RSS-14 Stacked, RSS-14 Stacked Omnidirectional, and<br />

RSS Limited symbologies as RSS. (The RSS Expanded and RSS Expanded Stacked symbologies are not supported by this<br />

scanner.)<br />

37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!