Users Manual - Warranty Life

(2) Prefix/Suffix
Each of a prefix and suffix should be a maximum of eight bytes long and consist of ASCII characters (00h to FEh).
The default is no prefix/suffix. You can specify a prefix or suffix with the configuration software (ScannerSetting).
(3) Code ID mark
This optional field specifies a code ID mark identifying a bar code symbology. Six types of system-defined code ID
marks are available as listed below. (Default: Type 1)
In addition, a user-defined code ID mark is also available for each of the bar code symbologies listed below. It should
be a maximum of two bytes long and consist of ASCII characters (00h to FEh).
You can also select whether or not to transmit the code ID mark. (Default: No transmission)
Bar code symbologies Type 1
(DENSO 1)
Type 2
(DENSO 2)
35
Code ID mark
Type 3 Type 4
Type 5
(AIM)*
Type 6
(AIM Type 2)*
UPC-A A C A ]X0
UPC-E C E D A ]X0
EAN-13 A F B A ]E0
EAN-8 B FF A A ]E4
UPC-A with 2-digit add-on A F A ]X1 ]X3
UPC-A with 5-digit add-on A G A ]X2 ]X3
UPC-E with 2-digit add-on C E H A ]X1 ]X3
UPC-E with 5-digit add-on C E I A ]X2 ]X3
EAN-13 with 2-digit add-on A F L A ]E1 ]E3
EAN-13 with 5-digit add-on A F M A ]E2 ]E3
EAN-8 with 2-digit add-on B FF J A ]E5
EAN-8 with 5-digit add-on B FF K A ]E6
Standard 2of5 (short) H O G ]R0
Standard 2of5 (normal) H O G ]S0
Interleaved 2of5 I N F ]Im
Code 32 M X B ]X0
Code 39 M V B ]Am
Code 39 Full ASCII M W B ]Am
CODABAR (NW-7) N R C ]Fm
Code 93 L U E ]G0
Code 128 K T D ]Cm
EAN-128 W k K ]C1
MSI P Z J ]M1
Plessey T a T ]P0
RSS** R None None ]e0
* Type 5 or 6 is a code ID mark system compliant with the AIM USA "Guidelines on Symbology Identifiers." The "m" suffix
differs depending upon the data transmission format of each bar code symbology.
** This manual collectively calls RSS-14, RSS-14 Truncated, RSS-14 Stacked, RSS-14 Stacked Omnidirectional,
and RSS Limited symbologies as RSS. (The RSS Expanded and RSS Expanded Stacked symbologies are not supported by
this scanner.)