OPERATION MANUAL

Specifications of Basic I/O Units and High-density I/O Units Appendix A
Circuit Configuration
to
to
to
to
3.9 kΩ
3.9 kΩ
Terminal Connections
0.01 µF
470 Ω
0.01 µF
470 Ω
Input indicator
Input indicator
24 V DC
24 V DC
Note 1. The polarity of the input power supply can be either positive or negative. The polarity of all commons,
however, must be the same.
2. COM terminals must all be wired even though they are connected internally.
C200H-ID111 DC Input Unit (64 Points)
Internal circuits
Simultaneously ON points
I/O word "m" I/O word "m + 1"
Ambient Temperature for Simultaneously ON Points
Ambient temperature
24 V DC
24 V DC
Rated Input Voltage 12 V DC
Operating Input Voltage 10.2 to 13.2 V DC
Input Impedance 2.7 kΩ
Input Current 4.1 mA typical (at 12 V DC)
ON Voltage 8.0 V DC min.
OFF Voltage 3.0 V DC max.
ON Response Time 1.0 ms max.
OFF Response Time 1.0 ms max.
No. of Circuits 2 (32 points/common)
Internal Current Consumption 120 mA 5 V DC max.
Weight 250 g max.
Input voltage: 24.0 V DC
Input voltage: 26.4 V DC
607