Quick Install Guide - Pitney Bowes Canada

More documents

Recommendations

Info

Troubleshooting No Dial Tone- Check that you are using an analog line such as a) most fax machine lines b) lines used by computer modem or credit card reader c) residential phone lines Check that you have entered a dialing prefix if your phone system needs a code to reach an outside line. Cannot Reach Data Center- Check that you have entered a dialing prefix if your phone system needs a code to reach an outside line. Not Enough Funds- You have tried to add more postage than you have in your account at Pitney Bowes. To Change information entered during setup - • Press Clear key on numeric keypad. • When prompted to Quit press yes. • At “Change communication settings?” press yes. • Press the down arrow key until you see the item you want to modify. • Press Enter to modify information. • To return to installing your mailstation 2, press the up or down arrow until “Continue Installation?” • Press yes
Contact List If You Need Assistance • Product Name: mailstation 2 • For support, go to: www.pitneybowes.ca/support/operatingguides • To order Pitney Bowes supplies and accessories, call 1-800-672-6937 or go to: www.pitneybowes.ca and click on Online Store. • To place requests for service or training, or view and pay invoices online, go to: www.pitneybowes.ca and click on My Account. • For questions, call 1-800-672-6937. Customer Service Representatives are available Monday through Friday, 8:00 AM – 8:00 PM ET.
Page 1 and 2: Digital Postage Meter Quick Install
Page 5 and 6: Set-up: Using PC NOTE: THE METER IS
Page 7 and 8: Set-up: Using PC 5 Connect the Mete
Page 9 and 10: Set-up: Using PC 7 Install Remove n
Page 11 and 12: Set-up: Using PC 8 Create a Test pr
Page 13 and 14: Set-up: Using PC 11 Congratulations
Page 15: Troubleshooting No Dial Tone- Check
Page 18 and 19: Alternative Set-up: Using an Analog
Page 26: 5500 Explorer Drive Mississauga, ON

Quick Install Guide - Pitney Bowes Canada

Create successful ePaper yourself

Delete template?

Save as template?