#6750, FREEZER MILLS - Wolf Laboratories
#6750, FREEZER MILLS - Wolf Laboratories
#6750, FREEZER MILLS - Wolf Laboratories
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.4 Settings Screen (Cont’d)<br />
Touch CYCLES again<br />
to accept new<br />
setting. Or touch the<br />
next setting to be<br />
modified.<br />
Figure 8 - Settings Screen: CYCLES activated<br />
Figure 9 - Settings Screen: new Cycles setting accepted<br />
6870 Freezer/Mill<br />
To run a program with the new settings, touch RETURN to return to the CURRENT SETTINGS<br />
screen. Then touch RUN SCREEN to go to the RUN screen, and touch RUN.<br />
To store the new program or to recall a stored program, touch STO/RCL to go to the first of two<br />
STORE/RECALL screens.<br />
Page 16 of 36 SPEX SamplePrep LLC March 2012<br />
The new value appears<br />
in this field as the<br />
setting is adjusted up or<br />
down.<br />
Use arrows to adjust<br />
number of cycles.