#6750, FREEZER MILLS - Wolf Laboratories
#6750, FREEZER MILLS - Wolf Laboratories
#6750, FREEZER MILLS - Wolf Laboratories
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11.0 TROUBLE-SHOOTING GUIDE (Cont’d)<br />
Plastic center cylinder cracks.<br />
6870 Freezer/Mill<br />
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION<br />
Extractor jams.<br />
Water on extractor screws or<br />
bell.<br />
Dry extractor before each use.<br />
Ice in threaded hole in end plug. Dry end plug thoroughly<br />
before using.<br />
Cylinder cleaned with alcohol or Use bleach, detergent, and<br />
other organic solvent.<br />
water to clean cylinders.<br />
Vial assembled when chilled.<br />
Sample piece acts as wedge.<br />
Never force end plugs into<br />
cold cylinder.<br />
Reduce size of sample pieces.<br />
Make sure there are not<br />
sample particles on cylinder<br />
ends.<br />
Page 34 of 36 SPEX SamplePrep LLC March 2012