Download - D-Link

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Configure the following Priority Setting parameters:
Parameter Description
From/To Users may select a port or group of ports to assign ToS priority settings, based on the following
Main Select field.
Main Select Select the general priority settings for the ports previously stated using the pull-down menu.
Priority option include:
Click Apply to implement changes made.
TOS Priority Settings
None – Choosing this option will clear the selected ports form having CoS priority
settings.
Port Mapping – Choosing this option will assign ports to map CoS priorities to individual
ports.
802.1p - Choosing this option will assign ports to map CoS priorities to 802.1p priorities.
This is the default setting for all ports.
MAC-Base - Choosing this option will assign ports to map CoS priorities to MAC
addresses.
TOS - Choosing this option will assign ports to map CoS priorities to ToS priorities.
DSCP - Choosing this option will assign ports to map CoS priorities to DSCP priorities.
When using the TOS/DSCP priority mechanism, the packet is classified based on the TOS/DSCP field in the IP header. If the tag
is present, the packet is assigned to a programmable egress queue based on the value of the tagged priority. The tagged priority
can be designated to any of the available queues. When TOS is set to enable, DSCP cannot be used, and when DSCP is set to
enable, TOS cannot be used.
TOS Priority Settings can be specified on this window. Use the drop-down menus to select a value for TOS and Class ID.
To view this window click CoS > TOS Priority Settings:
Figure 8- 8. TOS Priority Settings window
Click Apply to implement changes made.
153