Download - D-Link

More documents

Recommendations

Info

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch methods to this method list: local_enable - Adding this parameter will require the user to be authenticated using the local enable password database on the Switch. The user in the next section entitled Local Enable Password must set the local enable password. none - Adding this parameter will require an authentication to access the Switch. radius - Adding this parameter will require the user to be authenticated using the RADIUS protocol from a remote RADIUS server. tacacs - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. xtacacs - Adding this parameter will require the user to be authenticated using the XTACACS protocol from a remote XTACACS server. tacacs+ - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. server_group - Adding a previously configured server group will require the user to be authenticated using a user-defined server group previously configured on the Switch. 224
DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch Configure Local Enable Password This window will configure the locally enabled password for the Enable Admin command. When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally set on the Switch. To view the following window, click Security > Access Authentication Control > Configure Local Enable Password: Figure 10- 48. Configure Local Enable Password window To set the Local Enable Password, set the following parameters and click Apply. Parameter Description Old Local Enabled If a password was previously configured for this entry, enter it here in order to change it to a new password New Local Enabled Enter the new password that you wish to set on the Switch to authenticate users attempting to access Administrator Level privileges on the Switch. The user may set a password of up to 15 characters. Confirm Local Enabled Confirm the new password entered above. Entering a different password here from the one set in the New Local Enabled field will result in a fail message. Enable Admin The Enable Admin window is for users who have logged on to the Switch on the normal user level, and wish to be promoted to the administrator level. After logging on to the Switch, users will have only user level privileges. To gain access to administrator level privileges, the user will open this window and will have to enter an authentication password. Possible authentication methods for this function include TACACS/XTACACS/TACACS+/RADIUS, user defined server groups, local enable (local account on the Switch), or no authentication (none). Because XTACACS and TACACS do not support the enable function, the user must create a special account on the server host, which has the username "enable", and a password configured by the administrator that will support the "enable" function. This function becomes inoperable when the authentication policy is disabled. When this window appears, click the Enable Admin button revealing a dialog box for the user to enter authentication (password, username), as seen below. A successful entry will promote the user to Administrator level privileges on the Switch. To view the following window, click Security > Access Authentication Control > Enable Admin: Figure 10- 49. Enable Admin window Figure 10- 50. Enter Network Password dialog box 225
Page 1 and 2:
User Manual Product Model : DES-302
Page 3 and 4:
DES-3028 DES-3028P DES-3028G DES-30
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Preface DES-3028 DES-3028P DES-3028
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
RFC1493 Bridge RFC2819 RMON DES-30
Page 17 and 18:
LED Indicators DES-3028 DES-3028P D
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Installation DES-3028 DES-3028P DES
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Port Description DES-3028 DES-3028P
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Test Results DES-3028 DES-3028P DES
Page 59 and 60:
Page 61 and 62:
Log Settings DES-3028 DES-3028P DES
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
PoE System DES-3028 DES-3028P DES-3
Page 81 and 82:
Page 83 and 84:
The Upgrade to v1.6 DES-3028 DES-30
Page 85 and 86:
Topology DES-3028 DES-3028P DES-302
Page 87 and 88:
Tool Tips DES-3028 DES-3028P DES-30
Page 89 and 90:
Page 91 and 92:
Help DES-3028 DES-3028P DES-3028G D
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
L2 Features VLANs DES-3028 DES-3028
Page 101 and 102:
Page 103 and 104:
Asymmetric VLANs DES-3028 DES-3028P
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
CoS DES-3028 DES-3028P DES-3028G DE
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
ACL DES-3028 DES-3028P DES-3028G DE
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188: DES-3028 DES-3028P DES-3028G DES-30
Page 195 and 196: Security DES-3028 DES-3028P DES-302
Page 199 and 200: Port Security DES-3028 DES-3028P DE
Page 205 and 206: SSL DES-3028 DES-3028P DES-3028G DE
Page 207 and 208: RSA with RC4 128 MD5 RSA with 3DES
Page 229 and 230: Add Trusted Host IP Submask DES-302
Page 237: DES-3028 DES-3028P DES-3028G DES-30
Page 249 and 250: Received (RX) DES-3028 DES-3028P DE
Page 251 and 252: UMB Cast (RX) DES-3028 DES-3028P DE
Page 255 and 256: Packet Errors DES-3028 DES-3028P DE
Page 259 and 260: Packet Size DES-3028 DES-3028P DES-
Page 261 and 262: MAC Address DES-3028 DES-3028P DES-
Page 263 and 264: Switch Log DES-3028 DES-3028P DES-3
Page 275 and 276: Logout DES-3028 DES-3028P DES-3028G
Page 277 and 278: Internal Power Supply DES-3028 DES-
Page 279 and 280: LED indicators DES-3028 DES-3028P D
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
LAN - Local Area Network: A network
Page 301 and 302:
When the switch receives the frame,
Page 303 and 304:
How ARP spoofing attacks a network
Page 305:
Prevent ARP spoofing via packet con
Page 309 and 310:
Fiber Optic Ports - Optical Safety
Page 311 and 312:
Disclaimer of Other Warranties: EXC
Page 313 and 314:
pertaining to the product. While ne
Page 315 and 316:
LIMITED WARRANTY D-Link provides th
Page 317 and 318:
Operational adjustments covered in
Page 319 and 320:
Tech Support Technical Support You
Page 321 and 322:
Assistance technique Assistance tec
Page 323 and 324:
Teknistä tukea asiakkaille Suomess
Page 325 and 326:
Technical Support You can find soft
Page 327 and 328:
Техническая поддер
Page 329:
Suporte Técnico Você pode encontr
Page 332 and 333:
Technical Support この度は弊
show all

Download - D-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?