Download - D-Link

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
System Log Settings
The Switch can send Syslog messages to up to four designated servers using the System Log Server. To view this window click
Administration > System Log Settings, to view the window shown below.
Figure 6- 16. System Log Host window
The parameters configured for adding and editing System Log Server settings are the same. See the table below for a description.
The following parameters can be set:
Parameter Description
Index Syslog server settings index (1-4).
Figure 6- 17. System Log Host – Add window
Host IP The IP address of the Syslog server.
Severity This drop-down menu allows you to select the level of messages that will be sent. The options
are Warning, Informational, and All.
Facility Some of the operating system daemons and processes have been assigned Facility values.
Processes and daemons that have not been explicitly assigned a Facility may use any of the
"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font indicates the facility values that the Switch is
currently employing.
Numerical Facility
Code
45