Spicer Tandem Drive Axles Service Manual
Spicer Tandem Drive Axles Service Manual
Spicer Tandem Drive Axles Service Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pinion Removal<br />
25<br />
1. For D170 assembly, remove the pinion cover. Use a<br />
flat chisel to remove the cover from the carrier.<br />
2. If a pilot web is used, remove the web capscrews.<br />
1<br />
a. For D190 disassembly, install a M10 x 1.5<br />
bolt in the threaded jack holes found in-between<br />
the pilot web capscrews.<br />
1 - Threaded Jack Holes<br />
1<br />
<strong>Drive</strong> Pinion<br />
1<br />
b. For S190 disassembly, use the pry slots provided<br />
at each end of the pilot web.<br />
1 - Slots<br />
3. Before the pinion nut can be loosened, you must destake<br />
the nut from the slot of the pinion.<br />
4. To de-stake the nut, use a chisel or drift with a round<br />
tip. The flange of the nut must be pushed far enough<br />
outward so that the staked area will not interfere with<br />
the pinion threads when the nut is removed. See diagram<br />
on next page.<br />
1