Spicer Tandem Drive Axles Service Manual
Spicer Tandem Drive Axles Service Manual
Spicer Tandem Drive Axles Service Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
31<br />
9. Install the outer bearing cone.<br />
10. Install a pinion nut finger tight. This will hold the pinion<br />
in place while it is positioned into the press.<br />
<strong>Drive</strong> Pinion<br />
11. Align a 6” x 6” x 6” wood block under the drive pinion,<br />
then lower the carrier and pinion assembly into<br />
a press so that it is supported by the block.<br />
12. Remove the pinion nut.<br />
13. Place a press sleeve over the top of the outer bearing<br />
cone. Use the press to apply 5 tons of force. It is<br />
important to rotate the carrier slightly to make sure<br />
that the rollers of the bearing are properly seated.