RM2235 Manual PDF - University of Utah
RM2235 Manual PDF - University of Utah
RM2235 Manual PDF - University of Utah
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4. Startup<br />
4.4 Assembling the handwheel<br />
18<br />
Fig. 9<br />
The handwheel has to be assembled before attempting<br />
to use the instrument.<br />
The necessary parts and tools can be found in the toolkit<br />
supplied in the delivery.<br />
4<br />
2a<br />
5<br />
2<br />
3<br />
1<br />
The feather key (4) is loosely<br />
placed in the handwheel shaft (1)<br />
and fixed in place with a tie-rap<br />
during transport.<br />
Remove the cable tie (3).<br />
Caution!<br />
Make sure not to lose the<br />
feather key!<br />
Place the handwheel (2) on the<br />
handwheel shaft (1) as shown.<br />
Tighten the screw (2a) located<br />
in the center hole <strong>of</strong> the handwheel<br />
with an Allen key size 4<br />
(5).<br />
Remove the cover foil from the<br />
self-adhesive cover disk and<br />
fix the cover disk on the handwheel.<br />
Instruction manual V 1.4 – 02/2010
Change language