simoreg 6ra70 dc master

8
SIMOREG 6RA70 DC MASTER
Selection and Ordering Data
Electronics options
■ Ordering information
When a SIMOREG converter is ordered with
an additional option, the suffix “-Z” plus the
appropriate short code must be added to
the converter order number.
■ Options for the basic unit
8/4
Siemens DA 21.1 · 2006
6 R A 7 0 - - 0 - Z
+ +...
The options ordered with the short code are
supplied installed by the factory.
Order No. of the SIMOREG unit
short codes (several order codes can be
added in sequence)
Board Description Short code Order No.:
Technology software in the basic unit
(“freely-definable function blocks”)
S00 6RX1700-0AS00
CUD2 Terminal expansion board for basic unit K00 6RX1700-0AK00
Parallel connection cable 6RY1707-0AA08
– Option extra-low voltage for 400 V / 460 V / 575 V units
Unit is retrofitted for operation with 15 to 85 V
L04 –
■ Options for which an LBA or LBA + ADB are necessary
Board Description Short
code
LBA Local Bus Adapter for the electronics box
Prerequisite for installing optional supplementary boards
ADB Adapter board 1 ) Location 2
Prerequisite for installing
SBP, EB1, EB2, SLB, CBP2, CBC and CBD
Location 3
SBP Pulse encoder evaluation board 1 ) 2 ) 3 )
(small-format board; ADB is necessary)
EB1 Terminal expansion board 1 ) 3 )
(small-format board; ADB is necessary)
EB2 Terminal expansion board 1 ) 3 )
(small-format board; ADB is necessary)
SLB SIMOLINK board 1 ) 3 )
(small-format board; ADB is necessary)
CBP2 Communication board with interface
for SINEC L2 DP, (PROFIBUS-DP) 1 ) 3 )
(small-format board; ADB is necessary)
Short code
Installed in slot
D E F G
Order No.:
K11 – – – – 6SE7090-0XX84-4HA0
–
–
K01
–
K01
–
–
K02
–
K02
6SE7090-0XX84-0KA0
– C14 C15 C16 C17 6SX7010-0FA00
– G64 G65 G66 G67 6SX7010-0KB00
– G74 G75 G76 G77 6SX7010-0KC00
– G44 G45 G46 G47 6SX7010-0FJ00
– G94 G95 G96 G97 6SX7010-0FF05
CBC Communication board with interface for CAN protocol 1 ) 3 )
(small-format board; ADB is necessary)
– G24 G25 G26 G27 6SX7010-0FG00
CBD Communication board with interface for DeviceNet protocol 1 ) 3 )
(small-format board; ADB is necessary)
– G54 G55 G56 G57 6SX7010-0FK00
SCB1 Interface board with fiber-optic cable connection
Supplied incl. 10 m fiber-optic cable
– – – – – 6SE7090-0XX84-0BC0
T100 Technology board incl. hardware manual without software module 3 ) – – – – – 6SE7090-0XX87-0BB0
Hardware manual for T100 – – – – – 6SE7080-0CX87-0BB0
MS100 Software module “Universal drive” for T100 (EPROM)
without manual
– – – – – 6SE7098-0XX84-0BB0
Manual for software module MS100 “Universal drive”
German
English
French
Spanish
Italian
T300 Technology board with 2 connecting cables SC58 and SC60,
terminal strip SE300 and hardware manual 3 )
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SE7080-0CX84-0BB1
6SE7087-6CX84-0BB1
6SE7087-7CX84-0BB1
6SE7087-8CX84-0BB1
6SE7087-2CX84-0BB1
– – – – – 6SE7090-0XX87-4AH0
T400 Technology board (incl. Brief Description) 3 ) – – – – – 6DD1606-0AD0
User's Guide for T400 hardware and configuration – – – – – 6DD1903-0EA0
1) These supplementary boards are
supplied as a retrofit kit (with connector
and Brief Description).
The boards can be ordered as
spare parts with the following
order numbers:
Board Spare part (no accessories)
Order No.:
SBP 6SE7090-0XX84-0FA0
EB1 6SE7090-0XX84-0KB0
EB2 6SE7090-0XX84-0KC0
SLB 6SE7090-0XX84-0FJ0
CBP2 6SE7090-0XX84-0FF5
CBC 6SE7090-0XX84-0FG0
CBD 6SE7090-0XX84-0FK0
The retrofit kit is required for installation
in the SIMOREG unit to ensure
that the connectors required for system
installation and the Brief
Description are obtained.
For installation of the boards in the
SIMOREG unit, the Local Bus
Adapter LBA and the Adapter Board
ADB are also required. These must
be ordered separately.
2) The SIMOREG unit is already
equipped with a pulse encoder
evaluation board in the basic unit,
so the SBP is only necessary
when a second pulse encoder is
to be evaluated.
3) For installation of the board in the
SIMOREG unit, the Local Bus
Adapter LBA is also required.
This must be ordered separately.