simoreg 6ra70 dc master

4
SIMOREG 6RA70 DC MASTER
Options
Operating and monitoring
■ Drive ES Basic
Drive ES is based on the SI-
MATIC Manager user interface.
The parameters and diagrams
of drives are available
in SIMATIC Manager (integrated
data management).
Drive ES ensures that parameters
and diagrams are
uniquely assigned to a drive.
A SIMATIC project complete
with drive data can be archived.
■ Drive ES Graphic
Function diagrams are stored
in SIMATIC CFC format driveoriented.
The drive functions are configured
in BICO technology
with SIMATIC CFC.
Offline functionality.
Test mode (online functionality)
complete with “Modify
connection”, “Modify value”
and “Activate function block”.
■ Drive ES SIMATIC
This provides SIMATIC CPU
function blocks and sample
projects that process the
communication with Siemens
drives over PROFIBUS-DP or
USS.
The communication functions
are parameterized and not
programmed.
Features
Function blocks in STEP 7 design;
symbolic addressing;
function blocks with instance
data; online help.
For use in all SIMATIC programming
and configuration
environments, such as LAD,
FDB, STL, SCL and CFC.
■ Drive ES PCS7
Integrates drives with a
PROFIBUS-DP interface into
PCS7.
Can be used with STEP 7 or
PCS7 V 5 upwards.
4/40
Siemens DA 21.1 · 2006
SIMATIC Teleservice (V5) can
be used.
It communicates with the drive
over PROFIBUS-DP or USS.
Functions
Trace evaluation for
SIMOREG DC MASTER.
Read out fault memory for
SIMOREG DC MASTER.
Read out and feedback documentation.
New function block structure:
Individual modular functions
for runtime-optimized program
generation.
Function block types
Read and write process data
of freely configurable length
and consistency.
Exchange parameters cyclically
and non-cyclically, monitor
communication, read out
fault memory from SIMOREG
DC MASTER.
Download parameters into the
drive via the CPU.
Complete reparameterization
after converter exchange at
the push of a button from the
CPU.
Function block types
Display blocks and control
blocks for the integration of
drives into PCS7.
Upread and download of parameter
sets (as a complete
file or as a delta file compared
to the factory settings).
Parameter sets can be freely
combined and processed.
Script files can be used.
Guided start-up for SIMOREG
DC MASTER.
Installation with STEP 7
Drive ES Basic can be installed
as an option for STEP 7 (˜ V 5.0)
and integrates itself homogeneously
in the SIMATIC environment.
Installation without STEP 7
Drive ES Basic can also be installed
without STEP 7 and uses
its own Drive Manager (similar
to the SIMATIC Manager).
Fig. 4/38
Graphical programming
with Drive
ES Graphic and CFC
Fig. 4/39
Integrating drives
into the
STEP 7 Manager