simoreg 6ra70 dc master

More documents

Recommendations

Info

4 SIMOREG 6RA70 DC MASTER Options Integration of the electronics options ■ Backplane bus adapter LBA The electronics box can be equipped with the backplane bus adapter LBA (Local Bus Adapter) in order to utilize locations 2 and 3. Two supplementary boards or the optional boards plugged into the adapter boards can be combined with the CUD1 in the electronics box. The CUD1 must be moved if the backplane bus adapter is used. ■ Adapter board ADB The ADB (Adapter Board) is used to install the supplementary boards CBD, CBC, CBP, EB1, EB2, SBP and SLB in locations 2 and 3 of the electronics box. Two supplementary boards can be installed on the adapter board. The backplane bus adapter is required if the adapter board is used. 4/8 Siemens DA 21.1 · 2006 Fig. 4/7 Backplane bus adapter ■ Selection and ordering data LBA Backplane bus adapter Location 1 (CUD1) DC-5012 DC-5012 Location 2 (option) Location 3 (option) Electronics box Description Short code Supplied unassembled Order No. LBA Backplane bus adapter 6SE7090-0XX84-4HA0 LBA installed in the electronics box (prerequisite for the installation of optional boards) K11 Fig. 4/8 Adapter board ADB ■ Selection and ordering data Backplane bus adapter Slot E Adapter board ADB Supplementary boards DC-5014a Electronics box Description Short code Installation kit and spare part, supplied unassembled Order No. ADB Adapter board 6SE7090-0XX84-0KA0 Board installed 2 (Slot D and E) K01 in location 3 (Slot F and G) K02
■ Optional board SBP for pulse encoder The optional board SBP (Sensor Board Pulse) allows a second pulse encoder to be connected to the converter. Suitable pulse encoders All commercially available pulse encoders can be connected to this optional board. Their pulses can be processed as either bipolar or unipolar TTL or HTL level signals. Encoder signals up to a pulse frequency of 410 kHz are possible (4096 pulses per rev. at 6 000 rpm). Encoder monitoring can also be implemented through evaluation of the check track. The supply voltage for the connected encoder can be set to 5 V or 15 V. Temperature sensor The temperature sensor connection on the board is not evaluated in the SIMOREG system. Connections Signal cables are connected to terminal strips X400 and X401. Connectable cross-section: 2.5 mm2 (AWG12) Maximum connectable encoder cable length with shielding as specified 1 ): – 100 m (TTL signals) – 150 m with Tracks A and B (HTL signals) – 300 m with Track A+/A– and B+/B– (HTL signals). 1) See electromagnetically compatible installation on page 5/22. Switch for bus termination resistances for Tracks A, B, null 64-pole system connector Switch for encoder supply Fixing screws Fig. 4/9 Optional module SBP Terminal assignments on terminal strip X400 SIMOREG 6RA70 DC MASTER Options DA65-5105a 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 X400 X401 Terminal Designation Meaning Range 60 +V SS Power supply for pulse encoder 61 –VSS Power supply ground – 62 –Temp Negative (–) terminal KTY84/PTC100 63 +Temp Positive (+) terminal KTY84/PTC100 64 Coarse/fine ground Ground 65 Coarse pulse 1 Digital input coarse pulse 1 66 Coarse pulse 2 Digital input coarse pulse 2 67 Fine pulse 2 Digital input fine pulse 2 Connectable cross-section: 0.14 mm 2 to 1.5 mm 2 (AWG 16) Terminal 60 is on the top in the installed state. Terminal assignments on terminal strip X401 Terminal Designation Meaning Range 68 Track A+ Positive (+) terminal Track A 69 Track A– Negative (–) terminal Track A 70 Track B+ Positive (+) terminal Track B 71 Track B– Negative (–) terminal Track B 72 Zero pulse+ Positive (+) terminal Zero track 73 Zero pulse– Negative (–) terminal Zero track 74 CTRL+ Positive (+) terminal Check track 75 CTRL– = M Negative (–) terminal Check track = ground Connectable cross-section: 0.14 mm 2 to 1.5 mm 2 (AWG 16) Terminal 68 is on the top in the installed state. Terminal expansions 5/15 V , max = 250 mA TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar TTL/HTL/HTL unipolar Siemens DA 21.1 · 2006 4/9 4
Page 1 and 2:
simoreg Digital Chassis Converters
Page 3 and 4:
SIMOREG DC MASTER 6RA70 Digital Cha
Page 5 and 6:
Siemens DA 21.1 · 2006 0/3
Page 7 and 8:
SIMOREG 6RA70 DC MASTER Overview 1/
Page 9 and 10: Retrofit to make your existing syst
Page 11 and 12: SIMOREG 6RA70 DC MASTER System Over
Page 13 and 14: ■ Parameterization devices PMU si
Page 15 and 16: ■ Software structure Software str
Page 17 and 18: ■ Closed-loop functions in armatu
Page 19 and 20: SIMOREG 6RA70 DC MASTER System Over
Page 21 and 22: ■ Safety shutdown (E-STOP) The ta
Page 23 and 24: ■ Terminal assignments for basic
Page 25 and 26: ■ Terminal assignments for CUD1 S
Page 27 and 28: ■ Terminal assignments for CUD1 S
Page 29 and 30: ■ SIMOREG 6RA70 with fan ! F D
Page 31 and 32: SIMOREG 6RA70 DC MASTER Technical D
Page 33 and 34: ■ 3-ph. AC 400 V, 30 A to 125 A,
Page 35 and 36: ■ 3-ph. AC 400 V, 850 A to 3000 A
Page 53 and 54: SIMOREG 6RA70 DC MASTER Options 4/2
Page 55 and 56: ■ Terminal expansion board CUD2 T
Page 57 and 58: ■ Terminal expansion board CUD2
Page 59: ■ Installation of the electronics
Page 63 and 64: ■ Terminal expansion board EB1 Th
Page 65 and 66: ■ Terminal expansion board EB2 Th
Page 67 and 68: ■ Interface boards SCI1 and SCI2
Page 69 and 70: ■ Control terminal strip on inter
Page 71 and 72: ■ Technology board T400 The T400
Page 73 and 74: ■ Technology board T400 Type Feat
Page 75 and 76: ■ Technology board T400 SIMOREG 6
Page 77 and 78: ■ Technology board T100 Technical
Page 79 and 80: ■ Overview One of the most import
Page 81 and 82: SIMOREG 6RA70 DC MASTER Options ■
Page 83 and 84: SIMOREG 6RA70 DC MASTER Options ■
Page 85 and 86: ■ CAN communication board CBC The
Page 87 and 88: ■ SCB1 interface board The SCB1 (
Page 89 and 90: ■ OP1S operator panel The communi
Page 91 and 92: ■ Drive ES engineering package Wi
Page 93 and 94: ■ Integration of drives into SIMA
Page 95 and 96: ■ SIMOREG 6RL70 rectifier module
Page 97 and 98: SIMOREG 6RA70 DC MASTER Planning gu
Page 99 and 100: ■ Calculation of dynamic overload
Page 111 and 112:
■ Calculation of dynamic overload
Page 113 and 114:
. ■ Load cycles for single-quadra
Page 115 and 116:
■ Parallel connection of SIMOREG
Page 117 and 118:
■ Level of input pulses The evalu
Page 119 and 120:
SIMOREG 6RA70 DC MASTER ■ Electro
Page 121 and 122:
■ Components for the converters T
Page 123 and 124:
■ Radio interference suppression
Page 125 and 126:
SIMOREG 6RA70 DC MASTER SIMOREG CM
Page 127 and 128:
■ Type 6RA7000-0MV62-0 Measurable
Page 129 and 130:
SIMOREG 6RA70 DC MASTER SIMOREG CM
Page 131 and 132:
SIMOREG 6RA70 DC MASTER SIMOREG CCP
Page 133 and 134:
SIMOREG CCP is distinguished by its
Page 135 and 136:
SIMOREG 6RA70 DC MASTER SIMOREG CCP
Page 137 and 138:
■ SIMOREG CCP 3AC 50-60Hz 400V -
Page 139 and 140:
SIMOREG 6RA70 DC MASTER Selection a
Page 141 and 142:
Rated data Armature circuit Field c
Page 143 and 144:
*) see “Technical Data” SIMOREG
Page 145 and 146:
SIMOREG 6RA70 DC MASTER Dimension D
Page 147 and 148:
6RA70 DC MASTER ■ 3-ph. AC 400 V
Page 149 and 150:
6RA70 DC MASTER ■ 3-ph. AC 400 V,
Page 151 and 152:
6RA70 DC MASTER ■ 3-ph. AC 400 V
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
■ 3-ph. AC 690 V, 1000 A 6RA70 D
Page 161 and 162:
■ 600 A, 1000 A, 1200 A Fig. 9/26
Page 163 and 164:
SIMOREG 6RA70 DC MASTER Documentati
Page 165 and 166:
■ Documentation for SIMOREG units
Page 167 and 168:
■ Training courses SIMOREG 6RA70
Page 169 and 170:
SIMOREG 6RA70 DC MASTER Appendix A/
Page 171 and 172:
SIMOREG 6RA70 DC MASTER Appendix Ce
Page 173 and 174:
Page S Safety shutdown (E-STOP) 2/1
Page 175 and 176:
Overview SIMOREG 6RA70 DC MASTER Ap
Page 177 and 178:
.I In the face of harsh competition
Page 179 and 180:
Automation and Drives Catalog Inter
Page 181:
Catalog DA 21.1 • 2006 SIMOREG DC
show all

simoreg 6ra70 dc master

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?