You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
30063-01A<br />
The body fan is held in place with (2) #10-<br />
32x1/2” screws at the bottom. Remove<br />
these screws, then lift the body fan assembly<br />
straight up and off the <strong>bed</strong>. Be careful of the<br />
body fan power cable.<br />
Next to the body fan is a USB extension<br />
cable with a USB fl ash drive attached. Unscrew<br />
the clip holding the cable and push<br />
the USB cable through the pedestal.<br />
Ultimate Envy 434 Assembly and User Manual - 11