Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30063-01A<br />
On the back of the canopy, toward the foot<br />
end, is a rubber bellows protecting the wiring<br />
from the bench to the canopy. Disconnect<br />
one end of the bellows by loosening<br />
the clamp holding it in place.<br />
Pull the cables from the canopy out of the<br />
bench. You may fi nd it helpful to tape or tie<br />
the cables up so they do not get in the way<br />
when moving the canopy.<br />
Remove the (5) 3/8-20x1” hex bolts on each<br />
end of the canopy that attach it to the lift<br />
system. Make sure something or someone is<br />
holding the front of the canopy so it does<br />
not fall.<br />
Remove the canopy.<br />
BELLOWS<br />
Ultimate Envy 434 Assembly and User Manual - 17
Change language