You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Slide the bench acrylic into the aluminum<br />
channel at the back of the bench. Secure the<br />
acrylic in place with the (2) 1/4-20x1” Phillips<br />
screws at the front corners.<br />
34 - Ultimate Envy 434 Assembly and User Manual<br />
Loosen the 5 captive screws holding the<br />
front canopy acrylic channel. The channel<br />
will swing down but remain in place. Next,<br />
place the back edge of the canopy acrylic<br />
into the channel at the back of the canopy.<br />
Plug the wiring harness from the exciters to<br />
the harness in the <strong>bed</strong>. Swing the acrylic<br />
closed and lock the front edge by swinging<br />
the front channel closed and secure the 5<br />
screws.<br />
30063-01A