user manual - Tanning-bed-parts.com

More documents

Recommendations

Info

Remove the bench and canopy acrylics. The bench acrylic is secured by (2) 1/4- 20x1” Phillips screws at the front corners. Remove the screws and simply raise the acrylic slightly and pull free of the aluminum channel at the back. Five captive screws across the front of the canopy hold the canopy acrylic in place. Loosen these screws and the front channel will swing down. The screws will remain in the channel. Swing the channel down farther to release the acrylic and lower the acrylic to clear the handle. 8 - Ultimate Envy 434 Assembly and User Manual Attached to the canopy acrylic are 2 exciters (speakers). Disconnect the white connector on the wiring harness running from these exciters into the <strong>bed</strong>. Now lift the acrylic out of the back channel. 30063-01A
30063-01A Tucked inside the aluminum channel that supports the bench acrylic are 4 Phillips fl at head screws. Loosen these screws a few turns to release the clamps holding the front skirt. Do not remove the screws. Now tip the skirt forward and lift off the pegs at the bottom. Ultimate Envy 434 Assembly and User Manual - 9
Page 1 and 2: user manual 30063-01A
Page 3 and 4: 30063-01A Thank you for purchasing
Page 5 and 6: 30063-01A Rayonnement ultraviolet.
Page 7: 30063-01A Disassembly Your new tann
Page 11 and 12: 30063-01A The body fan is held in p
Page 13 and 14: 30063-01A The front cross member is
Page 15 and 16: 30063-01A Close the canopy and rein
Page 17 and 18: 30063-01A On the back of the canopy
Page 19 and 20: 30063-01A Remove the (16) #10-32x1/
Page 21 and 22: 30063-01A Assembly Place the pedest
Page 23 and 24: 30063-01A Slip the rear cross membe
Page 25 and 26: 30063-01A Slide the canopy frame in
Page 27 and 28: 30063-01A If you retightened the sc
Page 29 and 30: 30063-01A Install the front cross m
Page 31 and 32: 30063-01A Slip the USB extension ca
Page 33 and 34: 30063-01A Slip the “hooks” at t
Page 35 and 36: 30063-01A Electrical Connections Th
Page 37 and 38: 30063-01A Remote Connections Your s
Page 39 and 40: 30063-01A Scenario 4 - T-Max® Mana
Page 41 and 42: 30063-01A Operation Before You Tan
Page 43 and 44: 30063-01A The Tanning Session (Oper
Page 45 and 46: 30063-01A Opening / Replacing Acryl
Page 47 and 48: 30063-01A Sunbed not tanning ISSUE
Page 49 and 50: 30063-01A Notes: Ultimate Envy 434
Page 51 and 52: 30063-01A Parameter Function Defaul

user manual - Tanning-bed-parts.com

Create successful ePaper yourself

Delete template?

Save as template?