Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30063-01A<br />
Remove the (16) #10-32x1/2” screws holding<br />
the rear angle panel and set the panel<br />
aside.<br />
The rear cross member sits in cradles on<br />
each end and is secured in place with (8)<br />
#10x1/2” sheet metal screws. Remove the<br />
screws and slip the cross member out of the<br />
cradles.<br />
REAR ANGLE PANEL<br />
REAR CROSS MEMBER<br />
Ultimate Envy 434 Assembly and User Manual - 19