CUTSKILL® C-35A - Victor Technologies
CUTSKILL® C-35A - Victor Technologies
CUTSKILL® C-35A - Victor Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.02 Maintenance - Torch O-Rings<br />
O-rings on the Torch require lubrication on a regular basis, depending on how frequently the torch shield cup<br />
is disconnected and re-connected. This will allow the O-rings to remain pliable and provide a proper seal. The<br />
O-rings will dry out, becoming hard and cracked, if the O-ring lubricant is not used on a regular basis. This can<br />
lead to potential performance problems.<br />
Remove and apply a very light film of O-ring lubricant (Catalog # 8-4025) to the O-rings on a weekly basis.<br />
NOTE<br />
DO NOT use other lubricants or grease on the torch O-rings. They may not be designed to operate<br />
within high temperatures or may contain “unknown elements” that may react with the atmosphere.<br />
This reaction can leave contaminants inside the torch. Either of these conditions can lead to inconsistent<br />
performance or poor parts life.<br />
Art # A-04394<br />
Upper Groove<br />
with Vent Holes<br />
Must Remain Open<br />
Upper O-Ring<br />
in Correct Groove<br />
Cat. #8-3487<br />
Threads<br />
Lower O-Ring<br />
Cat. #8-3486<br />
Maintenance 5-2 Manual 0-4698
Change language