Download complete product manual (PDF-File) - esd electronics, Inc.

More documents

Recommendations

Info

5.3.2 Gain Analog Outputs For unipolar as well as for bipolar operation a digital value is applied to the D/A-converter which generates the maximum possible positive output voltage: $0FFF = +9.9976 V in unipolar operation or $07FF = +4.9976 V or +9.9951 V in bipolar operation Via gain potentiometer ‘Px0’ the output of the respective channel is set to the maximum possible positive output voltage. Note: The board is first configured and adjusted to the unipolar operation by the manufacturer. Then it is configured and adjusted to bipolar operation. The board is delivered with the bipolar setting (±10 V). If the board is then changed to unipolar operation (0...10 V) via jumpers again and is then not adjusted via the gain potentiometer, you have to expect a further deviation of about ½ LSB (regarding to the maximum value) in unipolar operation. Manual VME-DAC1612 Rev. 1.1 27
Analog Outputs 28 This side is intentionally left blank. Manual VME-DAC1612 Rev. 1.1
Page 1 and 2: Manual VME-DAC1612 Rev. 1.1 VME-DAC
Page 3 and 4: Manual VME-DAC1612 Rev. 1.1 N O T E
Page 5 and 6: 2 7.3.6 Adjusting the Channels ....
Page 7 and 8: Technical Data 2. Summary of Techni
Page 9 and 10: Technical Data 2.3 Order Informatio
Page 11 and 12: Jumpers and Coding Switches 4. Jump
Page 13 and 14: Jumpers and Coding Switches 4.1.2 S
Page 15 and 16: Jumpers and Coding Switches 12 Jump
Page 17 and 18: Jumpers and Coding Switches 4.1.4 M
Page 19 and 20: Jumpers and Coding Switches 4.1.5 N
Page 21 and 22: Jumpers and Coding Switches configu
Page 23 and 24: Analog Outputs 5.2 Operating Modes
Page 25 and 26: Analog Outputs 5.2.2 Unipolar Opera
Page 27 and 28: Analog Outputs 5.2.4 Bipolar Operat
Page 29: Analog Outputs 5.3.1 Offset Setting
Page 33 and 34: Software 6.2 PEARL-Example Program
Page 35 and 36: Appendix 7.1.2 I/O-Connector P2 and
Page 37 and 38: Appendix 7.1.3 Post Connectors P800
Page 39 and 40: Appendix 7.3 DAC812-Adapter (DAC812
Page 41 and 42: Appendix There are three combinatio
Page 43 and 44: Appendix 7.3.7 Assignment of Connec
Page 45 and 46: Appendix Signal descriptions to `Tr
Page 47 and 48: Appendix 7.3.7.3 Supplying the Anal

Download complete product manual (PDF-File) - esd electronics, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?