Download complete product manual (PDF-File) - esd electronics, Inc.
Download complete product manual (PDF-File) - esd electronics, Inc.
Download complete product manual (PDF-File) - esd electronics, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix<br />
7.3.7.3 Supplying the Analog Units via Screw Terminals (P4, P5)<br />
If the DAC812-adapter is not only to be used to feed through the output voltages of the VME-<br />
DAC1612, the power supply of the analog units of the adapter has to be supplied via P4 and P5.<br />
44<br />
P11<br />
1 2 3<br />
P12<br />
1 2 3<br />
P4<br />
P5<br />
S S S<br />
Channel 1 Channel 2 Channel 3<br />
P14<br />
1 2 3<br />
S<br />
P15<br />
1 2 3<br />
S<br />
P13<br />
1 2 3<br />
P16<br />
1 2 3<br />
Channel 4 Channel 5 Channel 6<br />
R Load<br />
P17<br />
1 2 3<br />
S<br />
S<br />
P18<br />
1 2 3<br />
S<br />
Channel 7 Channel 8<br />
+ -<br />
2<br />
1<br />
2<br />
1<br />
GND<br />
+15V<br />
P4 and P5 are 'SMKDS1.2' screw terminals and can be connected to lines with a cross-section of up<br />
to 1.5 mm 2 .<br />
+5V<br />
-15V<br />
7.3.7.4 Analog Outputs via Screw Terminals (P11-P18)<br />
Screw terminals P11 to P18 can be equipped later, if required. They are not available on the standard<br />
board of the DAC812-adapter.<br />
Shielding (connected to GND analog<br />
of the voltage supply)<br />
GND of the output signal<br />
Output signal:<br />
Voltage output of the VME-DAC1612 or<br />
Current output 0...20 mA or<br />
Current output 4...20 mA<br />
Manual VME-DAC1612 Rev. 1.1
Change language