Getting Started - ASCO Numatics
Getting Started - ASCO Numatics
Getting Started - ASCO Numatics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
G2-2 Series Interbus-S Quick Start Manual<br />
Interbus-S Communication M23 Connector Pin-Out<br />
BUS IN<br />
BUS IN and BUS OUT 9 Pin Sub-D Connector Pin-Out<br />
BUS OUT<br />
Pin No. Male Pin Female Pin<br />
Description<br />
Function Function<br />
1 DO1 DO2 Data Output signal<br />
2 DO1 DO2 Inverted Data Output signal<br />
3 DI1 DI2 Data Input signal<br />
4 DI1 DI2 Inverted Data Input signal<br />
5 GND GND Signal Ground<br />
6 Earth Ground Earth Ground Protective Earth (Case Ground)<br />
7 +24V +24V +24V Power<br />
8 0V 0V 0V Common<br />
Male = No Connection<br />
9 NC RSBT Female = Used to signify the last node on the bus. No connection = last<br />
node; connect to GND pin = additional nodes on the bus<br />
Case Earth Ground Earth Ground Protective Earth (Case Ground)<br />
TDG22ISQS3-0 5/07<br />
Subject to change without notice<br />
www.numatics.com/fieldbus<br />
Page 10
Change language