Control Units - Siemens

© Siemens AG 2008 All Rights Reserved
SINAMICS G120 Control Units CU240E/S, Edition 07/2008
Parameters
List of Parameters
Index: [0] = Analog input 0 (AI0)
[1] = Analog input 1 (AI1)
Dependency: Affects P2000 to P2003 (reference frequency, voltage, current or torque) depending on which setpoint is to be generated.
p0759[0...1] Value x2 of AI scaling / Value x2:AI scal.
Access level: 2 P-Group: Terminals Data type: FloatingPoint32
Quick comm. NO Active: NO Data set: -
Can be changed: U, T Calculated: -
Min Max Factory setting
-20 20 10
Description: Sets value of x2 as described in P0757 (AI scaling).
Index: [0] = Analog input 0 (AI0)
[1] = Analog input 1 (AI1)
Notice: The value x2 of AI scaling P0759 must be greater than the value x1 of AI scaling P0757.
p0760[0...1] Value y2 of AI scaling / Value y2:AI scal.
Access level: 2 P-Group: Terminals Data type: FloatingPoint32
Quick comm. NO Active: NO Data set: -
Can be changed: U, T Calculated: -
Min Max Factory setting
-99999.9 [%] 99999.9 [%] 100.0 [%]
Description: Sets value of y2 in [%] as described in P0757 (AI scaling).
Index: [0] = Analog input 0 (AI0)
[1] = Analog input 1 (AI1)
Dependency: Affects P2000 to P2003 (reference frequency, voltage, current or torque) depending on which setpoint is to be generated.
1-89