15.10.2013 Views

Road Racing FIM Superbike & Supersport World Championships

Road Racing FIM Superbike & Supersport World Championships

Road Racing FIM Superbike & Supersport World Championships

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

2.4.9.1 Ignition / Engine Control System<br />

Ignition/engine control system (ECU) may be modified or changed.<br />

Spark plugs, spark plug caps and wires may be replaced.<br />

2.4.9.2 Generator, alternator, electric starter<br />

The generator or alternator may be modified, removed or replaced.<br />

The electric starter may be modified, removed or replaced.<br />

For application from 1 st January 2013<br />

Motorcycles must start on the starting grid in neutral. Push-starting on the<br />

starting grid is not allowed, the use of a ‘booster’ battery is permitted.<br />

2.4.9.3 Additional equipment<br />

Additional electronic hardware equipment not on the original homologated<br />

motorcycle may be added (this permission refers to: data acquisition and sensors,<br />

computers, recording equipment, traction control).<br />

The addition of a device for infra red (IR) transmission of a signal between the<br />

racing rider and his team, used exclusively for lap timing, is allowed.<br />

The addition of a GPS unit for lap timing/scoring purposes is allowed.<br />

Telemetry is not allowed.<br />

2.4.10 Main frame and pre-assembled spare frame<br />

During the entire duration of the event, each rider can only use one (1)<br />

complete motorcycle, as presented for Technical Control, with the frame<br />

clearly identified with a seal. In case the frame needs to be replaced, the<br />

rider or the team must request the use of a spare frame to the <strong>FIM</strong> <strong>Superbike</strong><br />

Technical Director.<br />

The pre-assembled spare frame must be presented to the <strong>FIM</strong> <strong>Superbike</strong><br />

Technical Director to receive permission to rebuild the motorcycle. The<br />

pre-assembly of the frame shall be strictly limited to a rolling chassis from<br />

which at least the engine, fuel tank, fuel system, air box, ECU and exhaust<br />

system must be removed.<br />

68<br />

S B K

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!