Fldigi - Kambing UI

PSK Configuration
FldigiContents PSK Configuration
You should set the acquisition search range for waterfall left click action. As you adjust this control you will see
the red mode width change on the waterfall scale. You can also adjust this value by pointing the mouse to the
waterfall. Hold down the Control key and rotate the mouse wheel. The search routine which finds the psk signal
operates on a s/n threshold detector as well as recognizing the Psk phase modulation. You can adjust the
acquisition signal to ratio threshold for the search routine.
The PSK decoder estimates the signal to noise ratio, S/N, and the intermodulation distortion, IMD, of the received
signal. This measurement is valid during periods when the other station is transmitting the idle signal. The
estimates are displayed on the status bar. You can control how these values are displayed; clear or dim after NN
seconds. Setting the seconds to 0 disables the clear/dim action.
Fldigi can act as both a server and a client for PskMail, a separate application from fldigi. These two factors are
in support of the PskMail server. If you operate fldigi as the modem for a PskMail Server you can specify that
fldigi use the psk sweetspot and that its +/- automatic signal search range be limited by the number of Hertz
entered in the Server search range control.
PSK Configuration 64