Fldigi - Kambing UI

Thor Configuration
The decoder can detect and defeat a modest amount of CWI that is within the BW set by the BW factor.
Increasing the CWI threshold increasing the sensitivity for this correction. The offending tones are punctured
thereby rendering them null to the Viterbi decoder.
Enter the secondary text. This text will be sent during periods when your keyboard is inactive (between letters for
slow typists). The default for this text will be your callsign when you have entered that in the Operator
configuration tab.
Set the BW factor for the decoding prefilter. 2.0 should be adequate unless you are experiencing nearby
continuous wave interference (CWI). You can enable and disable the prefilter with the checkbox. Please note
that the filter requires additional cpu cycles. Older and slower cpu models might give better decoding with the
filter disabled.
Soft decode provides some additional decoder performance at the expense of more cpu cycles dedicated to the
decoder.
The DominoEX decoder can detect the presence of CWI within the passband set by the BW factor. Increasing the
CWI threshold increases the sensitivity to such interference. When the interference is detected the associated data
is culled using a technique called puncturing.
Thor has been specifically designed to be used with ARQ text transmissions. It is also an easy to use keyboard
chat mode. Thor operations are described in Operating Thor.
Contents
FldigiContents Thor Configuration
Thor Configuration 73