Software Manual - Galaxy Control Systems

Chapter 3 Overview
Software Manual |System Galaxy 7
This chapter guides installer through the tasks to prepare for software installation. This procedure
provides a step-by-step outline of the decisions to make in determining how the software will be
installed and configured. The decisions and information collected in this process will be used in
the Software Installation and System Programming activities, which are covered in chapters 4-9.
Software Setup Procedure
The Software Setup Procedure (next page) lists the decisions and tasks to accomplish before
software installation and system configuration occurs.
• The tasks are listed in the order they should be completed
• The order of steps mirrors the order of the actual software installation and configuration
This procedure covers tasks required to . . .
1) prepare for software installation and system configuration
2) perform the system configuration (software setup)
Each section in this chapter . . .
1) describes the objective
2) tells the purpose of software feature
3) contains key information about setting up the software
4) includes a Setup Template for recording software setup
Setup Templates are for recording site configuration. Templates help the installer know what
to collect organize the setup information when it’s collected and make it easy to do the actual
programming configuration. Additional copies of the Setup Templates are located in the Appendix
for larger sites. Feel free to photocopy each/any template you find particularly useful.
Once the tasks in this chapter are completed, the installer will have completed Step D in the
main System Installation Procedure found in Chapter 2 and be ready to proceed with
software installation.
Preparing for Software Installation | Chapter 3-2