user´s manual fixturlaser xa geometry
user´s manual fixturlaser xa geometry
user´s manual fixturlaser xa geometry
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
COARSE ADJUSTMENT<br />
Standard Straightness<br />
1. Position the laser transmitter at<br />
one end of the measurement<br />
object, on the object or on a<br />
tripod.<br />
2. Position the receiver as close<br />
as possible to the laser<br />
transmitter. Adjust the height<br />
of the laser transmitter and the<br />
receiver until the laser beam<br />
hits the centre of the<br />
target.<br />
3. Move the receiver as far from<br />
the laser transmitter as<br />
possible but still on the<br />
measurement object. Adjust<br />
the laser beam with the<br />
adjustment screws on the laser<br />
transmitter until it hits the<br />
centre of the target. Repeat<br />
until the laser beam hits the<br />
target at both ends of the<br />
measurement<br />
object.<br />
Fixturlaser XA Geometry Manual 4.7