Performance of Special Extinguishment Agents for ... - UL.com

Issued: September 30, 2008
Using the control point of 17 percent the test was repeated with 0.5 percent concentration with
the following heat release rate versus time data resulting:
Figure 41– Water Only versus 0.5 percent Agent Concentration Heat Release Rate Comparison
Data
11.5.1 Agent Application Testing Summary
As can be seen in Figure 40 and Figure 41, the initial suppression and the subsequent regrowth
was very similar for the agents tested at both concentrations when compared against the water
only baseline.
Page 52 of 55