Production and Industrial Facilities - INSPIRE - Europa

INSPIRE Reference: D2.8.III.8_v2.0(.0)
TWG-PF Data Specification on Production and
Industrial Facilities
7.1.6 Thematic accuracy – Classification correctness
2011-06-15 Page
Classification correctness should be documented using Number of incorrectly classified features.
Name Number of incorrectly classified features
Alternative name -
Data quality element classification correctness
Data quality sub-element -
Data quality basic measure error count
Definition number of incorrectly classified features
Description
Evaluation scope data set
Reporting scope data set
Parameter -
Data quality value type Integer
Data quality value structure -
Source reference -
Example Because of the definition of the scope, and considering the NACE
classification paragraphs as delimitation criteria of the scope, there
is a set of features that shouldn’t be included under the scope but
could be classified under the main paragraphs.
Measure identifier 60
7.2 Minimum data quality requirements and recommendations
No minimum data quality requirements are defined.
IR Requirement 12 For the data quality elements listed in Table 3, all data sets related to the spatial
data theme Production and Industrial Facilities shall meet the specified
target results.
Table 3 – Data quality elements and measures for which minimum data quality
requirements are defined for the spatial data theme Production and Industrial Facilities
Measure
Data quality element and
Target result(s) Condition
Section name(s)
sub-element
7.1.1
Completeness
Commission
–
7.1.2 Completeness – Omission
7.1.3
Logical Consistency –
7.1.5
7.1.6
Topological consistency
Positional accuracy –
Absolute or external
accuracy
Thematic accuracy –
No minimum data quality recommendations are defined.
LVIII