Production and Industrial Facilities - INSPIRE - Europa

INSPIRE Reference: D2.8.III.8_v2.0(.0)
TWG-PF Data Specification on Production and
8.1.4 Character Encoding
Industrial Facilities
2011-06-15 Page
Metadata element name Character Encoding
Definition The character encoding used in the data set.
ISO 19115 number and name
ISO/TS 19139 path
INSPIRE obligation / condition Mandatory, if an encoding is used that is not based on UTF-8.
INSPIRE multiplicity 0..*
Data type (and ISO 19115 no.)
Domain
Implementing instructions
Example -
Example XML encoding
Comments
LXIV
8859-2
8.1.5 Data Quality – Logical Consistency – Topological Consistency
Data Quality – Logical Consistency – Topological
Metadata element name
Consistency
Correctness of the explicitly encoded topological characteristics
Definition
of the dataset as described by the scope
ISO 19115 number and name 18. dataQualityInfo
ISO/TS 19139 path dataQualityInfo
Mandatory, if the data set includes types from the Generic
INSPIRE obligation / condition Network Model and does not assure centreline topology
(connectivity of centrelines) for the network.
INSPIRE multiplicity 0..*
Data type (and ISO 19115 no.) 115. DQ_TopologicalConsistency
Domain Lines 100-107 from ISO 19115
This metadata should be filled, at least, with these elements:
Implementing instructions - valueUnit: UnitOfMeasure
- value: Record
Example
Example XML encoding
See clauses on topological consistency in section 7 for detailed
information.
Comments
This metadata element is mandatory if connectivity is not
assured for network centrelines in the dataset. In this case the
Connectivity tolerance parameter – as described in section 7 –
must be provided in order to ensure automatic and
unambiguous creation of centreline topology in post-process.
8.2 Metadata elements for reporting data quality